1-800-397-1392
Today's Hours 8am - 9pm est
AHRI Number:201472688
The Goodman GMEC96 High-Efficiency Gas Furnace with two-stage gas valve and a multi-speed circulating blower provides efficient and economical performance. This gas furnace has an AFUE rating of up to 96%, which means that up to 96 cents of every $1.00 of heating energy expense warms your home.
Standard Features
The Goodman GSX130181 Air Conditioner Condenser uses the chlorine-free refrigerant R-410A and features operating sound levels that are among the lowest in the heating and cooling industry. With its 13 SEER rating, The Goodman GSX130181 Air Conditioner Condenser will help reduce energy consumption throughout the life of the system. Goodman has become one of the largest manufacturers of residential and light commercial air conditioning, heating, and indoor air quality products and systems by focusing on just one thing, building the most reliable and refreshingly affordable indoor comfort products in the market.
Please note that this product is regulated by DOE Efficiency Standards.
As a high-efficiency system, the GMEC960603BN Goodman gas furnace features many money saving features. The two-stage, multi-speed furnace uses a superior heat exchanger for better heat transfers to your home. Considered one of the best efficiencies on the market, the GMEC960603BN is a good way to go if you want to lower your gas bill.
Heating up to a medium-sized house in normal conditions, the GMEC960603BN Goodman gas furnace has an input of 60,000 BTU’s and an output of 57,600 BTU’s. The output in this case is determined by taking the input times the efficiency rating.
The GMEC960603BN Goodman gas furnace is a 96% efficient furnace, making it a condensing setup. This efficiency means that only 4% of the fuel going into the furnace is used up in furnace operations, while 96% of the fuel is used to heat your home. As a condensing furnace, this furnace will need to be vented with plastic or PVC flue venting. If you need to use metal flue venting, you would need an 80% efficient furnace.
With a two stage burner, the GMEC960603BN provides two heating outputs: one at a 60% heating output and one at a 100% output. The furnace also has a multi speed ECM motor instead of the last-generation inefficient PSC motor. Both of these built-in upgrades allow for your furnace to adjust the heating output and airflow more precisely to better suit your home’s comfort needs and provide a slightly higher efficiency.
With installation that follows your state and local codes and with online registration, all Goodman GMEC series furnaces come with a 10-year parts, 10-year unit replacement, and lifetime heat exchanger warranty through the manufacturer.
The exterior casing on the GMEC960603BN is heavy-gauge steel that is insulated for enhanced protection and to lower air leakage and sound output from normal furnace operation. The hot surface ignitor is more efficient than earlier models and standing pilot lights thanks to its revolutionary new technology. Both of these end up saving you money on installation, maintenance, and bills.
The cost-saving benefits of the Goodman brand doesn’t stop at efficiency. The GMEC960603BN Goodman furnace can be upflow or horizontal, increasing the number of ways that your installer can install the system. The low-voltage terminals that are color-coded, the installation is faster and easier over standard non-colored systems. Straight from the factory, the GMEC960603BN comes with natural gas valves. However, increasing its versatility in installation, Goodman offers an LP conversion kit (found here at an additional cost) if you need it to be propane instead of natural gas. Not only does the Goodman brand save you money on installation costs, but also with maintenance and warranty work. In the event of a rare warranty issue, the on board self-diagnostic control board alerts you and your serviceman what is wrong with the unit for most basic issues for a faster solution.
The Goodman GSX130181 is a cooling-only condenser unit. Providing a 13 SEER efficiency with a single stage, reciprocating compressor, the GSX130181 is an inexpensive condenser to cool your home when paired with an AC coil.
The GSX130181 condenser is a 1.5 ton AC only unit. In an ideal climate situation, the GSX130181 can usually cover a smaller house. For this unit to function, an indoor air handler or coil is required, and this unit is cooling only with no heating capacity on its own.
The Goodman GSX130181 AC condenser is designed to be 13 SEER. This is the lowest efficiency on the market today, making it an inexpensive option for northern states. Please note that this product is regulated by DOE Efficiency Standards.
Due to new efficiency requirements, this unit cannot be installed in the following states: Alabama, Arizona, Arkansas, California, Delaware, Florida, Georgia, Kentucky, Louisiana, Maryland, Mississippi, Nevada, New Mexico, North Carolina, Oklahoma, South Carolina, Tennessee, Texas, and Virginia.
The GSX130181 condenser comes with Goodman's standard 10 year parts warranty with online registration through the manufacturer. An installation that follows your state and local codes is required for the warranty to be upheld.
With an enhanced copper tube and aluminum fin coil, the GSX130181 is designed to prevent coil degradation. With the baked-on powder-paint finish, the condenser's heavy-gauge galvanized-steel cabinet is approved for up to 500 hours of salt-spray. The factory-installed filter dryer lowers general wear-and-tear on the unit. All of these features provide you with a durable, reliable condenser to be used whenever you need to cool your home.
The Goodman GSX130181 AC condenser comes standard with service valves that have sweat connections and easy-access gauge ports, both providing a lower installation difficulty and time to lower installation costs. The outer casing has both a top and a side access to allow for easier maintenance and warranty access when necessary.
The Goodman brand always has its customer's comfort in mind. The GSX130181 is no exception, with not only using high-quality components but also providing enhanced sound-dampening features that allows the brand to manufacture some of the lowest sound output levels in the industry.
With the CAPF1824B6 evaporator coil, Goodman provides an enhanced comfort to your home. With its ability to work with AC-only systems or with heat pumps and its ability to be installed in both the upflow or downflow orientations, the CAPF1824B6 is designed to be versatile in design and to provide an efficient comfort at a low cost.
The Goodman CAPF1824B6 evaporator coil is rated for a 1.5 to 2 ton output. In many system configurations, this coil may be larger in tonnage than its paired condenser. This is intentional, to maintain the overall efficiency of the entire system.Please note that in order for this coil to function, a furnace or blower and a condenser is required, all sold separately.
The CAPF1824B6 coil is covered under Goodman’s standard 10 year parts warranty when the unit is installed following your state and local codes, the coil is paired with a compatible condenser, and the entire system is registered online through the manufacturer.
The Goodman CAPF1824B6 evaporator coil is able to be installed in upflow and downflow applications. With its rust-resistant, thermoplastic drain plan, water retention rate is significantly lower than previous models. For even more enhanced durability, the cabinet is made of a strong galvanized-steel with a leather-grain finish. If you ever need to perform maintenance on your coil, there is a split-seam on the front of the casing for easy internal access. Please note that this coil will not work as a replacement for any single-piece air handler coils.
The CAPF1824B6 evaporator coil’s foil-faced insulation lowers air leakage, increasing the amount of air flow going into your ductwork, keeping you more comfortable while decreasing the unit’s run time. With compatible equipment, the CAPF1824B6 evaporator coil lives up to Goodman’s enhanced comfort and efficiency standards at a reasonable price.
Line sets are the copper lines which connect an outdoor condensing unit/heat pump to an inside air handler or evaporator coil. Line sets are available in different lengths and diameters to fit most applications.
Line sets are the copper lines which connect an outdoor condensing unit/heat pump to an inside air handler or evaporator coil. Linesets are available in different lengths and diameters to fit most applications.
60,000 BTU 96% AFUE 2 Stage Goodman Gas Furnace - Upflow/Horizontal | |
---|---|
SKU | GMEC960603BN |
Weight (in lbs) | 115.000000 |
Airflow Direction | Upflow/Horizontal |
Exhaust Flue Requirement | Plastic / PVC |
Brand/Manufacturer | Goodman |
Furnace Efficiency / AFUE | 96% |
Heating BTU | 60,000 |
Blower Motor | Multi-Speed - ECM |
Maximum CFM | 1200 |
Configuration | Upflow/Horizontal |
Exhaust Pipe | PVC |
Flue Location | Right |
Energy Star | Yes |
Electrical | 115 V. 1 Phase 60 Hz |
Burner Stages | Two |
Fuel Type | Gas |
Height | 34.5" |
Width | 17.5" |
Depth | 28.75" |
Warranty | Lifetime Heat Exchanger, 10 Years Unit Replacement, and 10 Years Parts with Online Registration |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
Safety Information |
This gas appliance requires a trained technician to install. Improperly connecting gas lines or improperly connecting a gas flue or venting may result in death. By purchasing this item, you are agreeing that you are using a trained technician to install this gas appliance. We will not be responsible for any injury or property damage arising from improper service or service procedures. Whoever installs or services this unit assumes responsibility for any personal injury or property damage which may result. Many jurisdictions require a license to install this equipment.
PROPOSITION 65 WARNING |
1.5 Ton 13 SEER Goodman Air Conditioner Condenser | |
SKU | GSX130181 |
Weight (in lbs) | 120.000000 |
Brand/Manufacturer | Goodman |
Cooling BTU | 18,000 |
Decibel Level (dBA) | 74 |
Energy Star | No |
Refrigerant | R410A |
SEER1 (Efficiency) | 13 |
Condenser Stages | Single Stage |
Compressor Type | Rotary |
Liquid Line | 3/8" |
Suction Line | 3/4" |
Liquid Valve Size | 3/8" |
Electrical | 208 / 230 V. 1 Phase 60 Hz |
Max Breaker Size | 15 amps |
Min. Breaker Size | 9.1 amps |
Tonnage | 1.5 Ton |
Valve Type | Sweat |
Height | 25.75" |
Width | 23" |
Depth | 23" |
Warranty | 10 Years with Online Registration |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
Safety Information | PROPOSITION 65 WARNING |
1.5 to 2 Ton 17.5" Width Goodman Vertical Evaporator Cased Coil | |
SKU | CAPF1824B6 |
Weight (in lbs) | 20.000000 |
Brand/Manufacturer | Goodman |
Configuration | Upflow / Downflow |
Refrigerant | R410A or R22 |
Liquid Line | 3/8" |
Suction Line | 3/4" |
Tonnage | 2 Ton |
Style | A-Coil |
Height | 18" |
Width | 17.5" |
Depth | 21" |
Warranty | 10 Years with Online Registration |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
Safety Information | PROPOSITION 65 WARNING |
30 Feet of 3/8" LL x 3/4" SL x 3/8" Insulated Line Set | |
SKU | LS38343830 |
Weight (in lbs) | 35.000000 |
Brand/Manufacturer | Online Supply |
Liquid Line | 3/8" |
Suction Line | 3/4" |
Suction Line Insulation Thickness | 3/4" |
Length | 30 feet |
50 Feet of 3/8" LL x 3/4" SL x 3/8" Insulated Line Set | |
SKU | LS38343850 |
Weight (in lbs) | 22.000000 |
Brand/Manufacturer | Online Supply |
Liquid Line | 3/8" |
Suction Line | 3/4" |
Suction Line Insulation Thickness | 3/4" |
Length | 50 feet |
Safety Information | PROPOSITION 65 WARNING |
1.5 Ton ACIQ Hybrid Upgrade | |
SKU | ACIQ-2X-EHPB-UPG |
Weight (in lbs) | 120.000000 |
Brand/Manufacturer | ACiQ |
Refrigerant | R410A |
Safety Information | PROPOSITION 65 WARNING |
No Thank You | |
SKU | NOTHANKYOU |
Weight (in lbs) | 120.000000 |