COMPETITIVE PRICING
We sell products at wholesale pricing. No markups, no hidden fees. Our average customer saves BETWEEN THREE TO SIX THOUSAND DOLLARS
-That's the Direct Advantage!
AHRI Number:201272839
As a high-efficiency system, the GMEC961205DN Goodman gas furnace features many money saving features. The two-stage, multi-speed furnace uses a superior heat exchanger for better heat transfers to your home. Considered one of the best efficiencies on the market, the GMEC961205DN is a good way to go if you want to lower your gas bill.
Heating up to a larger house in normal conditions, the GMEC961205DN Goodman gas furnace has an input of 120,000 BTU’s and an output of 115,200 BTU’s. The output in this case is determined by taking the input times the efficiency rating.
The GMEC961205DN Goodman gas furnace is a 96% efficient furnace, making it a condensing setup. This efficiency means that only 4% of the fuel going into the furnace is used up in furnace operations, while 96% of the fuel is used to heat your home. As a condensing furnace, this furnace will need to be vented with plastic or PVC flue venting. If you need to use metal flue venting, you would need an 80% efficient furnace.
With a two stage burner, the GMEC961205DN provides two heating outputs: one at a 60% heating output and one at a 100% output. The furnace also has a multi speed ECM motor instead of the last-generation inefficient PSC motor. Both of these built-in upgrades allow for your furnace to adjust the heating output and airflow more precisely to better suit your home’s comfort needs and provide a slightly higher efficiency.
With installation that follows your state and local codes and with online registration, all Goodman GMEC series furnaces come with a 10-year parts, 10-year unit replacement, and lifetime heat exchanger warranty through the manufacturer.
The exterior casing on the GMEC961205DN is heavy-gauge steel that is insulated for enhanced protection and to lower air leakage and sound output from normal furnace operation. The hot surface ignitor is more efficient than earlier models and standing pilot lights thanks to its revolutionary new technology. Both of these end up saving you money on installation, maintenance, and bills.
The cost-saving benefits of the Goodman brand doesn’t stop at efficiency. The GMEC961205DN Goodman furnace can be upflow or horizontal, increasing the number of ways that your installer can install the system. The low-voltage terminals that are color-coded, the installation is faster and easier over standard non-colored systems. Straight from the factory, the GMEC961205DN comes with natural gas valves. However, increasing its versatility in installation, Goodman offers an LP conversion kit (found here at an additional cost) if you need it to be propane instead of natural gas. Not only does the Goodman brand save you money on installation costs, but also with maintenance and warranty work. In the event of a rare warranty issue, the on board self-diagnostic control board alerts you and your serviceman what is wrong with the unit for most basic issues for a faster solution.
Line sets are the copper lines which connect an outdoor condensing unit/heat pump to an inside air handler or evaporator coil. Line sets are available in different lengths and diameters to fit most applications.
The Goodman CHPF4860D6 evaporator coil is designed for any installations that the coil needs to sit on its side, in the horizontal position. With its enhanced comfort and superior efficiency design, the CHPF4860D6 is an inexpensive yet quality choice for you.
At an output of 4 to 5 tons, the Goodman CHPF4860D6 evaporator coil is ready for almost any horizontal installation at that size. In many situations, a condenser that is paired with the condenser is going to be smaller than this coil. This is intentional and is to maintain the overall unit’s efficiency. Please note that for this coil to function, a furnace or blower and a condenser is required, all sold separately. This coil is not designed to replace a coil in a single-piece air handler.
The CHPF4860D6 coil is covered under Goodman’s standard 10 year parts warranty when the unit is installed following your state and local codes, the coil is paired with a compatible R410A condenser, and the entire system is registered online through the manufacturer.
The Goodman CHPF4860D6 evaporator coil is designed with a durable outer casing and a rust-resistant drain pan to lower general wear and tear to make sure the coil works for years to come. To ease installation, the unit is designed to be slim and able to fit in many crawl spaces and attics, and with its foil-face insulation making the unit’s air leakage minimal, installation location does not necessarily have to be insulated for normal temperature operations. For maintenance, the coil has a split-seam on the front of it for easier access.
The Goodman brand has been focused on providing efficiency and comfort where it matters most while still being an inexpensive brand. With its superior components and a standard efficiency, the Goodman GSX140601 air conditioner condenser is a popular choice for homeowners around the United States.
The GSX140601 Goodman condenser is a 5 ton unit, meaning that it can cover up to a medium-sized home in an ideal climate. In some unit bundles, the required AC coil may be larger than this condenser in tonnage. This is intentional, as it maintains the unit's efficiency.
The GSX140601 AC-only conditioner can be up to 14 SEER in efficiency when paired with the proper equipment. As the standard efficiency on the market for all states, this unit is average in efficiency. Every SEER point is 5-7% more efficient than the one lower than it, saving you money the higher the SEER rating of the unit. Please note that this product is regulated by DOE Efficiency Standards.
Due to new efficiency requirements, this unit cannot be installed in the following states: Alabama, Arizona, Arkansas, California, Delaware, Florida, Georgia, Kentucky, Louisiana, Maryland, Mississippi, Nevada, New Mexico, North Carolina, Oklahoma, South Carolina, Tennessee, Texas, and Virginia.
The GSX140601 condenser comes with Goodman's standard 10 year parts warranty with online registration through the manufacturer. An installation that follows your state and local codes is required for the warranty to be upheld.
The GSX140601 Goodman AC condenser cabinet has a baked-on painted finish and is made of a galvanized-steel, making it approved for up to 500 hours of salt-spray and compliant with the 2010 Florida building code integrity requirements for hurricane-type winds when properly anchored. Moreover, the unit is equipped from the factory with a filter dryer that lowers general wear-and-tear on the unit. The GSX140601 provides peace of mind thanks to its durability and reliability enhancements.
The Goodman GSX140601 AC condenser comes standard with service valves that have sweat connections and easy-access gauge ports, both providing a lower installation difficulty and time to lower installation costs. The outer casing has both a top and a side access to allow for easier maintenance and warranty access when necessary.
The Goodman brand always has its customer's comfort in mind. The GSX140601 is no exception, with not only using high-quality components but also providing enhanced sound-dampening features that allows the brand to manufacture some of the lowest sound output levels in the industry.
Line sets are the copper lines which connect an outdoor condensing unit/heat pump to an inside air handler or evaporator coil. Line sets are available in different lengths and diameters to fit most applications.
Goodman's TXV valves are designed to improve the reliability and efficiency of your central split system. With the TX5N4, you can be assured that your three-and-a-half to five ton system is getting the proper refrigerant flow, even through changing conditions. Since this valve is installed externally, it is easy to service and maintain. If you're looking to improve the efficiency and performance of your system, the TX5N4 is a good start.
Please note that this is not an exhaustive list. Use Ctrl+F to simplify your search. This part is compatible with the following models:
GSX130421 GSX130481 GSX130601 GSX130611 DSXC160481 DSXC160601 DSXC160481 DSXC160601 GSZ130421 GSZ130481 GSZ130601 SSZ140421 SSZ140481 SSZ140601 SSZ160421 SSZ160481 SSZ160601 DSZC160481 DSZC160601 DSZC180481 DSZC180601 CAPF3642*6 CAUF3642*6 CHPF3642B6 CSCF3642N6
120,000 BTU 96% AFUE 2 Stage Goodman Gas Furnace - Upflow/Horizontal | |
---|---|
SKU | GMEC961205DN |
Weight (in lbs) | 154.000000 |
Airflow Direction | Upflow/Horizontal |
Exhaust Flue Requirement | Plastic / PVC |
Brand/Manufacturer | Goodman |
Furnace Efficiency / AFUE | 96% |
Heating BTU | 120,000 |
Blower Motor | Multi-Speed - ECM |
Maximum CFM | 2000 |
Configuration | Upflow/Horizontal |
Flue Location | Right |
Energy Star | Yes |
Electrical | 115 V. 1 Phase 60 Hz |
Burner Stages | Two |
Fuel Type | Gas |
Height | 34.5" |
Width | 24.5" |
Depth | 28.75" |
Warranty | Lifetime Heat Exchanger, 10 Years Unit Replacement, and 10 Years Parts with Online Registration |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
Safety Information |
This gas appliance requires a trained technician to install. Improperly connecting gas lines or improperly connecting a gas flue or venting may result in death. By purchasing this item, you are agreeing that you are using a trained technician to install this gas appliance. We will not be responsible for any injury or property damage arising from improper service or service procedures. Whoever installs or services this unit assumes responsibility for any personal injury or property damage which may result. Many jurisdictions require a license to install this equipment.
PROPOSITION 65 WARNING |
30 Feet of 3/8" LL x 7/8" SL x 3/8" Insulated Line Set | |
SKU | LS38783830 |
Weight (in lbs) | 30.000000 |
Brand/Manufacturer | Online Supply |
Liquid Line | 3/8" |
Suction Line | 7/8" |
Suction Line Insulation Thickness | 3/8" |
Length | 30 feet |
Safety Information | PROPOSITION 65 WARNING |
4 to 5 Ton 24.5" Goodman Horizontal Evaporator Cased Coil | |
SKU | CHPF4860D6 |
Weight (in lbs) | 77.000000 |
Brand/Manufacturer | Goodman |
Configuration | Horizontal |
Refrigerant | R410A or R22 |
Liquid Line | 3/8" |
Suction Line | 7/8" |
Tonnage | 5 Ton |
Style | A-Coil |
Height | 24.5" |
Width | 26" |
Depth | 21.125" |
Warranty | 10 Years with Online Registration |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
Safety Information | PROPOSITION 65 WARNING |
5 Ton 14 SEER Goodman Air Conditioner Condenser | |
SKU | GSX140601 |
Weight (in lbs) | 314.000000 |
Brand/Manufacturer | Goodman |
Cooling BTU | 60,000 |
Decibel Level (dBA) | 75 |
Energy Star | No |
Refrigerant | R410A |
SEER1 (Efficiency) | 14 |
Condenser Stages | Single Stage |
Compressor Type | Scroll |
Liquid Valve Size | 3/8" |
Suction Valve Size | 7/8" |
Electrical | 208 / 230 V. 1 Phase 60 Hz |
Max Breaker Size | 50 amps |
Min. Breaker Size | 32.8 amps |
Tonnage | 5 Ton |
Height | 38.25" |
Width | 35.5" |
Depth | 35.5" |
Warranty | 10 Years with Online Registration |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
Safety Information | PROPOSITION 65 WARNING |
5 Ton ACiQ Hybrid Upgrade | |
SKU | ACIQ-60-EHPB-UPG |
Weight (in lbs) | 120.000000 |
Brand/Manufacturer | ACiQ |
Refrigerant | R410A |
Safety Information | PROPOSITION 65 WARNING |
50 Feet of 3/8" LL x 1 1/8" SL x 3/8" Insulated Line Set | |
SKU | LS381183850 |
Weight (in lbs) | 48.000000 |
Brand/Manufacturer | Online Supply |
Liquid Line | 3/8" |
Suction Line | 1 1/8" |
Suction Line Insulation Thickness | 1/2" |
Length | 50 feet |
Safety Information | PROPOSITION 65 WARNING |
Goodman 3.5 to 5 Ton TXV Kit - R-410A | |
SKU | TX5N4 |
Weight (in lbs) | 2.500000 |
Brand/Manufacturer | Goodman |
Refrigerant | R410A |
Safety Information | PROPOSITION 65 WARNING |
No Thank You | |
SKU | NOTHANKYOU |
Weight (in lbs) | 120.000000 |