1-800-397-1392
Today's Hours 8am - 9pm est
Today's Hours 8am - 5pm est
Today's Hours 8am - 9pm est
In stock
AHRI Number:209321890
A Goodman combination system is a great choice to keep your home comfortable all season long. With tons of extra features and a great price, a Goodman furnace and air conditioning system is the perfect choice for all of your heating and cooling needs.
The GCVC800803BX gas furnace is from one of the top-of-the-line series by Goodman. Considered one of the best of the best, this furnace has a two stage burner and a variable speed blower motor. With the best durability and reliability that Goodman 80% efficient furnaces have to offer, and a lower emissions output to match the low NOx compliance regulations in California, we are proud to offer you the Goodman GCVC800803BX gas furnace.
In California, many counties have a lower NOx emission requirement than the rest of the United States. The GCVC800803BX Goodman gas furnace is California Low NOx compliant. With a built-in low emission filter, this Goodman gas furnace produces less nitrogen oxides to be released into the atmosphere, lowering the overall amount of toxic greenhouse gases output of the average California home. Please note that this furnace cannot be installed in the following counties in California: Fresno, Joaquin, Kern, Kings, Los Angeles, Madera, Merced, Orange, Riverside, San Bernardino, San Stanislaus, and Tulare. In these counties you are required to purchase an Ultra Low NOx furnace. If you have any questions, please contact us.
At an input of 80,000 BTU’s, the GCVC800803BX Goodman gas furnace is suitable for up to a medium-size house in an average climate. The output of this furnace is 64,000 BTU’s, which is calculated by the input times the 80% efficiency rating.
With the industry standard efficiency of 80% AFUE, the GMVC80603BX Goodman gas furnace uses 80% of the fuel going into the furnace to heat your home and the remaining 20% of the fuel going into it is used up in normal furnace operations and is lost out of the flue venting. GCVC800803BX requires metal flue venting like any 80% efficient furnace, while anything 90% and above would require plastic or PVC venting.
The GCVC800803BX is equipped with two stages, allowing for an adjusted heat output to better suit your home’s comfort needs. The integrated variable speed blower on the furnace allows for an exact airflow output based on the requirements for your home as calculated by the control board and thermostat, keeping your home at a more constant temperature and increasing efficiency overall.
Goodman’s 10 year parts, 10 year unit replacement, and it’s phenomenal lifetime heat exchange warranties
The tubular heat exchanger on the GCVC800803BX is heavy-duty for constant use in the winter. Made of aluminized steel, Goodman heat exchangers provide fast and efficient heat transfer rates, all the while increasing the furnace’s dependability and reliability. The heavy-duty exterior of the unit protects all of the unit’s internal mechanisms and the secure cabinet lowers air leakage and sound output in comparison to its competitors, all providing enhanced comfort that lasts a long time.
The GCVC800803BX furnace runs natively on natural gas. When you use Goodman’s associated LP conversion kit (found here at an additional cost), this furnace can use propane instead when the installation calls for it. This Goodman furnace is also able to be installed in the downflow or horizontal positions, allowing for a broader application potential.
The Goodman brand has been focused on providing efficiency and comfort where it matters most while still being an inexpensive brand. With its superior components and a standard efficiency, the Goodman GSXN401810 air conditioner condenser is a popular choice for homeowners around the United States.
The GSXN401810 Goodman condenser is a 1.5 ton unit, meaning that it can cover up to a small home in an ideal climate. In some unit bundles, the required AC coil may be larger than this condenser in tonnage. This is intentional, as it maintains the unit's efficiency.
The GSXN401810 AC-only conditioner can be up to 14.3 SEER2 in efficiency when paired with the proper equipment. As the standard efficiency on the market for all states, this unit is average in efficiency. Every SEER2 point is 5-7% more efficient than the one lower than it, saving you money the higher the SEER2 rating of the unit. Please note that this product is regulated by DOE Efficiency Standards.
The GSXN401810 condenser comes with Goodman's standard 10 year parts warranty with online registration through the manufacturer. An installation that follows your state and local codes is required for the warranty to be upheld.
The GSXN401810 Goodman AC condenser cabinet has a baked-on painted finish and is made of a galvanized-steel, making it approved for up to 500 hours of salt-spray and compliant with the 2010 Florida building code integrity requirements for hurricane-type winds when properly anchored. Moreover, the unit is equipped from the factory with a filter dryer that lowers general wear-and-tear on the unit. The GSXN401810 provides peace of mind thanks to its durability and reliability enhancements.
The Goodman GSXN401810 AC condenser comes standard with service valves that have sweat connections and easy-access gauge ports, both providing a lower installation difficulty and time to lower installation costs. The outer casing has both a top and a side access to allow for easier maintenance and warranty access when necessary.
The Goodman brand always has its customer's comfort in mind. The GSXN401810 is no exception, with not only using high-quality components but also providing enhanced sound-dampening features that allows the brand to manufacture some of the lowest sound output levels in the industry.
With the CAPFA1818B6 evaporator coil, Goodman provides an enhanced comfort to your home. With its ability to work with AC-only systems or with heat pumps and its ability to be installed in both the upflow or downflow orientations, the CAPFA1818B6 is designed to be versatile in design and to provide an efficient comfort at a low cost.
The Goodman CAPFA1818B6 evaporator coil is rated for a 1.5 ton output. In many system configurations, this coil may be larger in tonnage than its paired condenser. This is intentional, to maintain the overall efficiency of the entire system.Please note that in order for this coil to function, a furnace or blower and a condenser is required, all sold separately.
The CAPFA1818B6 coil is covered under Goodman’s standard 10 year parts warranty when the unit is installed following your state and local codes, the coil is paired with a compatible condenser, and the entire system is registered online through the manufacturer.
The Goodman CAPFA1818B6 evaporator coil is able to be installed in upflow and downflow applications. With its rust-resistant, thermoplastic drain plan, water retention rate is significantly lower than previous models. For even more enhanced durability, the cabinet is made of a strong galvanized-steel with a leather-grain finish. If you ever need to perform maintenance on your coil, there is a split-seam on the front of the casing for easy internal access. Please note that this coil will not work as a replacement for any single-piece air handler coils.
The CAPFA1818C6 evaporator coil’s foil-faced insulation lowers air leakage, increasing the amount of air flow going into your ductwork, keeping you more comfortable while decreasing the unit’s run time. With compatible equipment, the CAPFA1818B6 evaporator coil lives up to Goodman’s enhanced comfort and efficiency standards at a reasonable price.
Goodman's TXV valves are designed to improve the reliability and efficiency of your central split system. With the TX2N4A, you can be assured that your one-and-a-half or two ton system is getting the proper refrigerant flow, even through changing conditions. Since this valve is installed externally, it is easy to service and maintain. If you're looking to improve the efficiency and performance of your system, the TX2N4A is a good start.
Please note that this is not an exhaustive list. Use Ctrl+F to simplify your search. This part is compatible with the following models:
GSX130181 GSX130241 DSXC160241 GSZ130181 GSZ130241 SSZ140181 SSZ140241 SSZ160241 DSZC160241 CAPF1824*6 CAUF1824*6 CHPF1824A6 CSCF1824N6
Inverter Condenser - Inverter technology changes AC power to DC, allowing the compressor inside your condenser to speed up and slow down. This allows the system to self-adjust BTU output based on demand. As the weather changes, so will your system output.
Learning System - This system is packed with sensors and controls air temperature inside and outside, system performance, duct pressure, refrigerant temperature. The first time you start your system it enters a learning mode keeping air moving across the sensors and storing information so future startups and run cycles will be at max efficiency.
Size for cooling - The self-adjusting inverter design allows you to size your system based on demand. The ACiQ Inverter Condensers automatically adjusts to run like a 1 ton to keep you cool and dry.
With an efficiency rating of 16 SEER, the variable output ACIQ-18-AC-UPG will keep you comfortable across a wide range of conditions. Use our handy size calculator Here to determine the demand for your home. For cooling, this system can operate anywhere from 12,000 BTU to 24,000 BTU without short cycling.
State-of-the-Art manufacturing is behind every ACiQ product, resulting in quiet, effective operation over a long service life. Most models have low ambient heating and cooling.
ACiQ saves you money up front, but also over time by reducing energy bills. Every ACiQ condenser features a variable inverter twin rotary compressor, lowering wear and increasing performance. Compare specs against other brands in the same price category, and you will agree, ACiQ is the best value.
Intelligent design goes into every element of ACiQ’s manufacturing ensuring flawless performance for years. Low friction, variable inverter twin rotary compressors give bulletproof reliability. Register equipment at ACiQ.com to extend warranty protection to 7 years parts, 12 years compressor.
| 80,000 BTU 80% Two-Stage Variable-Speed ECM Gas Furnace Low NOx - Downflow/Horizontal | |
|---|---|
| SKU | GCVC800803BX |
| Weight | 109.000000 |
| AHRI Certificate Number | 204633346 |
| Config Search | Downflow/Horizontal |
| Exhaust Flue Requirement | Metal |
| Manufacturer | Goodman |
| Furnace Efficiency / AFUE | 80% |
| Heating BTU | 80,000 |
| Blower Motor | Variable Speed |
| Maximum CFM | 1200 |
| Configuration | Downflow/Horizontal |
| Electrical | 115 VAC, 60 Hz |
| Low NOx | Low NOx |
| Burner Stages | Two |
| Fuel Type | Propane, Natural Gas |
| Certification | AHRI Certified; ETL Listed |
| Height | 33 3/8" |
| Width | 17.5" |
| Depth | 28" |
| Warranty | Lifetime Heat Exchanger, 10 Years Parts, and 10 Years Unit Replacement Warranty with Online Registration |
| Resources | You will need Adobe® Acrobat® Reader to view PDF Documents |
| Safety Information |
This gas appliance requires a trained technician to install. Improperly connecting gas lines or improperly connecting a gas flue or venting may result in death. By purchasing this item, you are agreeing that you are using a trained technician to install this gas appliance. We will not be responsible for any injury or property damage arising from improper service or service procedures. Whoever installs or services this unit assumes responsibility for any personal injury or property damage which may result. Many jurisdictions require a license to install this equipment.
PROPOSITION 65 WARNING |
| 1.5 Ton 14.3 SEER2 Goodman Air Conditioner Condenser | |
| SKU | GSXN401810 |
| Weight | 136.000000 |
| Manufacturer | Goodman |
| Replaces | GSX130181 |
| Cooling BTU | 18,000 |
| Blower Motor | Single Speed PSC Motor |
| Decibel Level (dBA) | 71 |
| Horsepower | 0.125 HP |
| Refrigerant | R410A |
| SEER2 | 14.3 |
| Condenser Stages | Single Stage |
| Compressor Type | Rotary |
| Liquid Line | 3/8" |
| Suction Line | 3/4" |
| Electrical | 208/230v 1 Phase 60Hz |
| Max Breaker Size | 15 Amps |
| Min. Breaker Size | 8.3 Amps |
| Tonnage | 1.5 Ton |
| Connection | Sweat |
| Height | 27" |
| Width | 26" |
| Depth | 26" |
| Warranty | 10 Years Parts with Online Registration |
| Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING |
| 1.5 Ton 17.5" Width Goodman Vertical Evaporator Coil - Cased | |
| SKU | CAPFA1818B6 |
| Weight | 38.000000 |
| Manufacturer | Goodman |
| Configuration | Upflow / Downflow |
| Refrigerant | R410A or R22 |
| Liquid Line | 3/8" |
| Suction Line | 3/4" |
| Tonnage | 1.5 Ton |
| Style | A-Coil |
| Height | 18" |
| Width | 17 1/2" |
| Depth | 21" |
| Warranty | 10 Years with Online Registration |
| Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING |
| Goodman 1.5 to 2 Ton TXV Kit - R-410A | |
| SKU | TX2N4A |
| Weight | 2.500000 |
| Manufacturer | Goodman |
| Refrigerant | R410A |
| Safety Information | PROPOSITION 65 WARNING |
| 1.5 Ton ACIQ Hybrid Upgrade | |
| SKU | ACIQ-18-EHPB-UPG |
| Weight | 120.000000 |
| Manufacturer | ACiQ |
| Refrigerant | R410A |
| Safety Information | PROPOSITION 65 WARNING |
| 1.5 Ton ACiQ AC Inverter Upgrade | |
| SKU | ACIQ-18-AC-UPG |
| Weight | 109.130000 |
| Manufacturer | ACiQ |
| Refrigerant | R410A |
| Safety Information | PROPOSITION 65 WARNING |
For over three decades Goodman has concentrated on something more important than simple brand recognition consumer advertising. They focus on the design, engineering, and manufacturing of dependable products that have helped millions and millions of homeowners achieve reliable, high-quality, and affordable indoor comfort. In addition, Goodman has earned the loyalty and respect from thousands of local independent heating and cooling professionals across North America.
