Manufactured by Carrier
The AirQuest N80ESN0702116A is an inexpensive model of furnace to provide reasonable comfort to your home. At a basic efficiency, this furnace will heat your home adequately with the right output, providing comfort to your home even in the coldest parts of the year.
The AirQuest N80ESN0702116A has an input of 66,000 BTU. With an efficiency of 80%, this means that the furnace has an output of 52,800 BTU. The 80% AFUE also means that for the gas going into the furnace, 80% of it is used to heat your home while the remaining 20% is lost out the flue piping and lost to normal furnace operations. All 80% furnaces require metal flue venting, and if you need it to be plastic/PVC venting a furnace with an efficiency of 90% or above is required. While this unit uses natural gas as fuel out of the box, we also have an LP conversion kit, available at an additional cost. Please note that this furnace is not Low NOx or Ultra Low NOx compliant and if shipped to California may be subject to a mitigation fee.
AirQuest offers 10 year parts and 20 year heat exchanger limited warranties. Please note that in order for the heat exchanger and parts warranties to be upheld, the unit must be registered through the manufacturer within 90 days of installation. The installation must also follow your state and local codes.
With its ability to be installed in any configuration (upflow, downflow, or horizontal) the AirQuest N80ESN0702116A is very versatile in application potential. The unit has a durable outer casing that can withstand wear-and-tear through its entire lifetime, providing the peace of mind that your home will stay comfortable year-round. Please note that this furnace is not intended for mobile home installation on its own.
|66,000 BTU 80% AFUE Single Stage Multi-Positional AirQuest Gas Furnace|
|Weight (in lbs)||142.000000|
|Exhaust Flue Requirement||Metal|
Carrier Equivalent: 58SB0A070E21--16
Tempstar Equivalent: TN80ESN0702116A
Bryant Equivalent: 810SA48070E21
|Furnace Efficiency / AFUE||80%|
|Blower Motor||Multi-Speed ECM|
|Electrical||115v 1 Phase 60 Hz|
|Max Breaker Size||15 Amps|
|Maximum Inlet Pressure||13.6"wc|
|Ignition Type||Direct Ignition with Silicon Nitride Hot Surface Ignitor|
|Fuel Type||Natural Gas|
|Warranty||20 Year Heat Exchanger and 10 Year Parts with Online Registration|
This gas appliance requires a trained technician to install. Improperly connecting gas lines or improperly connecting a gas flue or venting may result in death. By purchasing this item, you are agreeing that you are using a trained technician to install this gas appliance. We will not be responsible for any injury or property damage arising from improper service or service procedures. Whoever installs or services this unit assumes responsibility for any personal injury or property damage which may result. Many jurisdictions require a license to install this equipment.
PROPOSITION 65 WARNING