48,000 BTU 21.5 SEER ACiQ IntelliHeat 4-Zone Ceiling Cassette Mini Split System - 12+12+18+18

OVERVIEW

ACiQ is the smart solution to adaptive heating and cooling in almost any space and climate -all at an affordable cost. With the ACIQ-48Z-HH-M5B, you can have up to 4 air handlers run off a single condenser, saving space outside and keeping you perfectly comfortable in your home.

QUICK FACTS

• 48,000 BTU, 21 SEER multi zone heat pump condenser
• Designed to function with up to 4 attached air handlers
• Efficient cooling from -22°F to 122°F outdoor temperatures
• Efficient heating from -22°F to 57°F outdoor temperatures
• Integrated IntelliHeat technology with base pan heater
• Gold Fin full-protection coating on condenser coil
• Quiet operation at even the highest workloads

48,000 BTU, 21 SEER

The 48,000 BTU, ACiQ-48Z-HH-M5 is designed to easily support up to 4 air handlers at up to 1.25 times the condenser BTU rating, or 60,000 BTU across all air handlers. This adaptive, inverter condenser is constantly self-adjusting to provide the precise amount of heating or cooling needed to maintain your desired temperature in each room or zone. You can set different temperatures room by room, even turn off heating and cooling in unused areas. This, combined with a high efficiency rating of 21 SEER, means you are buying a system designed to intelligently save you money both up front and over the lifetime of the unit.

IntelliHeat Base pan Heater Technology

The ACIQ-48Z-HH-M5B has integrated IntelliHeat technology to maximize heat performance in extreme cold weather. IntelliHeat is two technologies working together: Extended heat pump performance (hyper heat) and base pan heater technology. The extended heat pump performance harnesses the power of inverter condenser by using outdoor temp sensing, variable refrigerant flow and variable condenser fan speed to maximize heat extraction all the way down to -22. In addition, every ACIQ multizone condenser includes a base pan heater to keep ice from collecting on the condenser coil during heat pump operation. This ensures your unit spends more time providing heat for your family and less time in defrost mode. It also protects the coil from damaging freezing, allowing you to enjoy your investment for the long haul. The best news of all? ACIQ includes these technologies with every multizone condenser – the competition makes you pay for it.

ACiQ condenser coils are covered in a durable Gold Fin protective coating, providing enhanced resistance to corrosion even in harsh climates. Paired with the protection of the integrated base pan heater, your system will run consistently year after year, giving you peace of mind in every season.

ACiQ multi zone condensers are pre-charged with enough R410-A refrigerant for up to 98' of line set across all air handlers connected to the condenser. Your technician may not need to add any refrigerant or will add just enough to make up the additional length. All units are run-tested at the factory before shipping. The system is designed to be reliable and give years of trouble-free performance. Should your unit need servicing, troubleshooting is easy thanks to the unit's self-diagnosing control board with alerts that are sent to each connected air handler.

Although the condenser is pre-charged, please note that this model of equipment does not have quick connect line set connectors and is not a self-install unit. You will need a professional to add more refrigerant and vacuum the lines as needed. Installation materials such as line sets, control wire, drain hose, whip and disconnect are not included, but are available at additional cost in the Accessories section to the right of this text. For all multi zone ACiQ condensers, a minimum of two air handlers is needed for the unit to function.

The warranty on the ACiQ-48Z-HH-M5 is a 5 year parts and 7 year limited compressor warranty. With online registration and an installation following your state and local installation codes, the limited compressor warranty will increase to 12 years, giving you the peace of mind that you need to make sure your ACiQ system stays intelligent throughout its long life.

Mini Split systems are great, but what if you don’t want the air handler on your wall? ACiQ offers the ACIQ-12CC-HH-MB ceiling cassette air handler for customers who want a more hidden appearance and more centralized air distribution. Ceiling Cassette air handlers provide the same high-efficiency heating and cooling of a regular wall mounted unit, and a wired, wall mounted thermostat and remote are included. Once the ceiling cassette is mounted in the ceiling, only the grille is visible for the most understated appearance.

Installation Considerations

Ceiling Cassettes are flush-mounted, which requires removal of enough ceiling material to create a 2’ x 2’ x 12” cavity for the unit. These units will fit between 24” on-center joists, but are too large to fit between 16” on-center joists without modifying the structure of your framing. Additionally, Ceiling Cassettes have factory-installed, onboard pumps to lift the condensation produced by the unit during cooling. The pump can lift the condensation up to 14”. From there, it will be necessary to construct a PVC drain system to route the condensation to a safe wastewater location. Refrigerant and wiring connections are the same as the wall mounted units.

FEATURES

• 12,000 btu of Heating or Cooling
• Dry and Fan modes also available
• Good for a small room in most climates
• 4 Way Air Supply for consistent room coverage
• Handheld remote and wall mounted thermostat included
• Decorative Grille included

Mini Split systems are great, but what if you don’t want the air handler on your wall? ACiQ offers the ACIQ-18CC-HH-MB ceiling cassette air handler for customers who want a more hidden appearance and more centralized air distribution. Ceiling Cassette air handlers provide the same high-efficiency heating and cooling of a regular wall mounted unit, and a wired, wall mounted thermostat and remote are included. Once the ceiling cassette is mounted in the ceiling, only the grille is visible for the most understated appearance.

Installation Considerations

Ceiling Cassettes are flush-mounted, which requires removal of enough ceiling material to create a 2’ x 2’ x 12” cavity for the unit. These units will fit between 24” on-center joists, but are too large to fit between 16” on-center joists without modifying the structure of your framing. Additionally, Ceiling Cassettes have factory-installed, onboard pumps to lift the condensation produced by the unit during cooling. The pump can lift the condensation up to 14”. From there, it will be necessary to construct a PVC drain system to route the condensation to a safe wastewater location. Refrigerant and wiring connections are the same as the wall mounted units.

FEATURES

• 18,000 btu of Heating or Cooling
• Dry and Fan modes also available
• Good for a medium room in most climates
• 4 Way Air Supply for consistent room coverage
• Handheld remote and wall mounted thermostat included
• Decorative Grille included