1-800-397-1392
Today's Hours 8am - 9pm est
In stock
AHRI Number:213492135
Experience year-round comfort and savings with our Dual Fuel System, seamlessly blending a high-efficiency furnace with advanced inverter evaporator coil technology. You'll enjoy:
Upgrade today to a more efficient, eco-friendly, and comfortable home. Contact us to learn how the Dual Fuel Inverter System can revolutionize your central air system.
Designed to be a high-efficiency furnace, the ACiQ N95ESN0401410A is a money saving unit to provide heating throughout even the coldest months of the year. With its multi-positional design, this unit is a good all-around choice for nearly any application.
The ACiQ N95ESN0401410A has an input of 40,000 BTU. With an efficiency of 96%, this means that the furnace has an output of 38,400 BTU. The 96% AFUE also means that for the gas going into the furnace, 96% of it is used to heat your home while only 4% is lost out of the flue piping and lost to normal furnace operations. All furnaces at this efficiency (90% and above) requires plastic/PVC flue venting, and if metal flue venting is required for your installation, an 80% efficient furnace would be needed instead. While this unit uses natural gas as fuel out of the box, we also have an LP conversion kit, available at an additional cost.Please note that this furnace is not Ultra Low NOx compliant and if shipped to California may be subject to a mitigation fee.
Inverter condenser - Inverter technology changes AC power to DC, allowing the compressor inside your condenser to speed up and slow down. This allows the system to self-adjust BTU output based on demand. As the weather changes, so will your system output.
Learning system - This system is packed with sensors and controls air temperature inside and outside, system performance, duct pressure, refrigerant temperature. The first time you start your system it enters a learning mode keeping air moving across the sensors and storing information so future startups and run cycles will be at max efficiency.
Size for heat - The self-adjusting inverter design allows you to size your system based on heat demand. With standard heat pumps, sizing for heat can mean a muggy house during summer. The ACiQ Next Gen 2-ton heat pump system automatically adjusts to run like a 1 ton to keep you cool and dry.
Extreme Heat Technology - Extreme Heat means extended temperature range heating all the way down to -22°. Traditional heat pumps don't make significant heat below about 30°F outside temperature, below that, they rely on expensive backup electric heat. The ACiQ Next Gen with Extreme Heat uses the inverter to vary the refrigerant flow, allowing for maximum heat extraction during extreme cold temperatures. The backup electric heat supplements the heat pump, and only takes over below -22°F. The heat pump gives 100% at 0°F, and still gives 80% at -22°F, saving you up to 75% on cold weather heating bills.
With an efficiency rating of 17.4 SEER2, the variable output ACiQ-24-HPB will keep you comfortable across a wide range of conditions. Use our handy size calculator Here to determine the demand for your home. For cooling, this system can operate anywhere from 12,000 BTU to 24,000 BTU without short cycling. For heating, this system is capable of 22,400 BTU at -22°F all the way up to 31,740 BTU at 50°F. This increased range means it fits more possible applications.
ACiQ takes pride in its ability to provide a high-quality system, including all system components.The ACiQ-24-ACL-14 multi-positional A-coil stands out as a superior choice for various applications, ensuring optimal unit efficiency through its factory-integrated TXV kit, maximizing energy optimization. With its outstanding performance features and versatile orientation options, this coil becomes the ultimate solution for achieving unmatched comfort in your home.
The ACiQ-24-ACL-14 is rated for up to 2 tons of heating and cooling. With its ability to be installed with either an AC-only condenser or a heat pump condenser, this unit is ideal for many applications. In some packages, this coil will be larger than its paired condenser, which will increase the overall efficiency of the entire unit, but the coil should never be smaller than its paired condenser. Please note that this item cannot operate independently from a compatible condenser and blower or furnace, each available at an additional cost.
40,000 BTU 96% AFUE Single Stage Multi-Positional ACiQ Gas Furnace | |
---|---|
SKU | N95ESN0401410A |
Weight | 120.000000 |
AHRI Certificate Number | 213148785 |
Manufacturer | ACiQ |
Equivalent | Carrier Equivalent: 59SC5B040E14--10 Tempstar Equivalent: TN95ESN0401410A Bryant Equivalent: 915SB30040E14 |
Product Features | Rebate Available |
Furnace Efficiency / AFUE | 96% |
Heating BTU | 40,000 |
Blower Motor | ECM |
Maximum CFM | 950 |
Configuration | Upflow/Downflow/Horizontal |
Energy Star | Yes |
Burner Stages | Single |
Fuel Type | Propane, Natural Gas |
Height | 35" |
Width | 14" |
Depth | 29 1/2" |
Warranty | 20 Year Heat Exchanger / 10 Year Parts with Online Registration |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
Safety Information |
This gas appliance requires a trained technician to install. Improperly connecting gas lines or improperly connecting a gas flue or venting may result in death. By purchasing this item, you are agreeing that you are using a trained technician to install this gas appliance. We will not be responsible for any injury or property damage arising from improper service or service procedures. Whoever installs or services this unit assumes responsibility for any personal injury or property damage which may result. Many jurisdictions require a license to install this equipment.
PROPOSITION 65 WARNING |
ACiQ 2 Ton 20 SEER High Efficiency Central Heat Pump | Inverter | Extreme Heat | |
SKU | ACiQ-24-HPB |
Refrigerant Charge | 102.32 |
Weight | 145.500000 |
AHRI Certificate Number | 208106635 |
Manufacturer | ACiQ |
Product Features | Inverter, Low Ambient Heating, Rebate Available, Two Stage Condenser, Variable Speed Condenser |
HSPF | 11.6 |
HSPF2 | 10 |
Cooling BTU | 24000 BTU |
Heating BTU | 24000 BTU |
Maximum CFM | 3000.00 |
Decibel Level (dBA) | 62 |
Electric Heat | Heat Pump |
Refrigerant | R410A |
SEER | 20 |
SEER2 | 17.5 |
EER | 12.5 |
Compressor Type | Rotary |
Liquid Line | 3/8" |
Suction Line | 3/4" |
Electrical | 208/230V 1 Phase 60 Hz |
Max Breaker Size | 35 |
Min. Breaker Size | 20.5 |
Tonnage | 2 Ton |
BTU/Tonnage | 24,000 BTU/2 Ton |
Min/Max Outdoor Temp for Heating | -22~75 |
Min/Max Outdoor Temp for Cooling | 5~122 |
Zone Compatibility | Single Zone |
Ambient Temperature Range | -22~122 |
Length | 37.24" |
Height | 31.89" |
Depth | 16.14" |
Warranty | 12 year compressor, 7 year parts with online registration |
Resources |
|
Safety Information | PROPOSITION 65 WARNING |
ACiQ 2 Ton 14.5" Width Multi-Positional Evaporator Cased Coil | |
SKU | ACIQ-24-ACL-14 |
Weight | 46.500000 |
Manufacturer | ACiQ |
Configuration | Multi-Positional |
Refrigerant | R410A |
Liquid Line | 3/8" |
Suction Line | 3/4" |
Tonnage | 2 Ton |
Style | A-Coil |
Height | 18" |
Width | 14 1/2" |
Depth | 21" |
Warranty | 10 years parts w/ online registration |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
Safety Information | PROPOSITION 65 WARNING |