AirQuest Gemini 7.5 Ton Commercial Heat Pump Unit 208/230 Volt 3 Phase

We Price Match!

Give our sales team a call at

123.123.1233 (Toll Free) or

123.111.2222 (International) and we'll

match any competitor's price.

Chat With Us!

By
AirQuest
Model
38AUQA08A0A5-0A0A0
ID
87700
Availability: Ships Within 2-3 Business Days
AirQuest

Authorized AirQuest Dealer

Manufactured by Carrier

$5,276.70
Bread Checkout
 
Free Shipping
Accessories for this product

FEATURES

Energy Saving Opportunity

Electrical energy consumption is always a prime concern when selecting an air-conditioning system for a commercial application. An easy, effective way to save energy is to install a heat pump. When building plans call for a heat pump, consider a matched 38AUQ/40RUQ heat pump system. These systems not only offer highly efficient cooling, they also provide a clean, safe, efficient source of heat. In fact, they are capable of delivering more than 3 units of heat energy for each unit of electrical power consumed.

Superb Heating/Cooling Performance

The outstanding performance of these heat pump systems is due to the heat pump’s ability to absorb and transfer heat - from outdoors to indoors for heating, and from indoors to outdoors for cooling. System indoor and outdoor sections operate as evaporators or condensers, depending on whether heating or cooling is required. The heating cycle starts with the outdoor coil absorbing heat from the surrounding air (even outside air at extremely cold temperatures), and ends with the indoor coil releasing or rejecting heat to the air around it.

Application Versatility

Whether for a new application or replacement, these split system heat pumps offer time-proven performance for year-round comfort in any climate. With matching 40RUQ air handler, the units standard cooling operation ranges up to 125°F (52°C) and down to 35°F (2°C) ambient temperatures. If lower ambient cooling temperatures are required, the Motor Master controller will allow operation down to -20°F (-29°C) ambient temperatures.

Rugged Long Life Compressor

The 38AUQ outdoor units are equipped with a scroll compressor for superior efficiency and long life. Crank case heaters are available where required and each circuit is further protected by a suction line accumulator to protect during the defrost cycles or unique applications plus provide important oil management, all resulting in higher reliability.

Controls for Performance Efficiency

These units offer the building owner operating controls and components designed for performance dependability. The highly efficient hermetic scroll compressors are engineered for long life and durability. The compressor includes overload protection and compressor vibration isolation for further enhancement of quiet operation. The high-pressure switch protects the entire refrigeration system from abnormally high operating pressures. A loss-of-charge switch is also provided to protect the system against low charge conditions. Each unit utilizes the the Comfort Alert diagnostic and troubleshooting control system. This protects the units operation and provides valuable diagnostic information such as:

  • System Go LED Indicator
  • Fault LED Indicator
  • Compressor Fault LED Indicator
  • Phase Loss Protection
  • Phase Reversal Protection
  • Anti Short Cycle Protection
The 24-v-75VA control circuit transformer permits quick, easy wiring of standard and programmable 24-v thermostats. The 24-v-75VA control circuit transformer also comes with a re-settable circuit breaker for extra protection. Latest safety standards are assured through UL (Underwriters’ Laboratories), UL-Canada and ETL (Electrical Testing Laboratories) approval . The 38AUQ units utilize a reliable defrost board with field configurable timed defrost cycles. The defrost board may be easily configured for defrost cycles of 30 to 90 minutes, depending upon the application. Motor failure due to electrical overload is prevented by temperature and current sensors. Coil quality and performance are enhanced by copper tubes and aluminum fins, which provide maximum heat transfer. The coil is circuited for subcooling. A large heat transfer surface offers additional efficiency.

Custom Matching to 40RUQ Indoor Units for Superior System Performance

Information on matching 40RUQ packaged air handler follows for convenience. See separate product data for more details.

The 40RUQ Heat Pump air handler has excellent fan performance, efficient direct-expansion (DX) coils, easy installation, and a unique combination of indoor air quality features. Its versatility and state-of-the-art features help to ensure that the heat pump system provides economical performance now and in the future.

Easy Installation and Service

The 40RUQ multi-position design and component layout helps to get the unit installed and running quickly. The direct-expansion (DX) coils have factory-installed thermostatic expansion valves (TXVs) with matching distributor nozzles. All 40RUQ units also include factory-installed check valves and piping for heat pump duty with matching 38AUQ units. The 40RUQ units can be converted from horizontal to vertical operation simply by repositioning the unit. Drain pan connections are duplicated on both sides of the unit. Fan motors and contactors are pre-wired. For easier service, the filters, motor, drive, TXVs, check valves, and coil connections are accessible by removing a single side panel.

Indoor-Air Quality (IAQ)

The unique combination of IAQ features in the 40RUQ Series indoor units helps to make sure that only clean, fresh, conditioned air is delivered to the occupied space. In the Cooling mode, direct-expansion (DX) cooling coils prevent the build-up of humidity in the room, even during part-load conditions. Standard 2-in. disposable filters remove dust and airborne particles from the occupied space. Thermal insulation contains an immobilized anti-microbial agent to inhibit the growth of bacteria and fungi. The anti-microbial agent is registered with the U.S. Environmental Protection Agency (EPA). The pitched corrosion-free drain pan can be adjusted for a right- or left-hand connection to provide positive drainage and to prevent standing condensate. Each unit contains two separate drain pans which are provided for either vertical or horizontal fan coil positions. The 40RUQ accessory economizer can provide ventilation air to improve indoor air quality.

Economical

The 40RUQ Series air handlers have low initial costs, and they continue to save money by providing reduced installation expense and energy-efficient performance. Quick installation reduces installation costs, and TXVs, check valves, and heat pump piping are factory-installed. High-efficiency, precision-balanced fans minimize air turbulence, surging, and unbalanced operation, cutting operating expenses. The economizer accessory precisely controls the blend of outdoor air and room air to achieve comfort levels. When the outside air enthalpy is suitable, outside air dampers can fully open to provide “free” cooling.

Rugged Dependability

The 40RUQ units are made to last. The die-formed galvanized steel panels ensure structural integrity under all operating conditions. Galvanized steel fan housings are securely mounted to a die-formed galvanized steel deck. Coil housings are galvanized steel, and coils have aluminum fins mechanically bonded to copper tubes. The condensate drain pans provide corrosion-free performance.

Coil Flexibility

Model 40RUQ coils have galvanized steel casings; inlet and outlet connections are on the same end. The coils are designed for use with Puron (R-410A) refrigerant and have 3/8-in. diameter copper tubes mechanically bonded to aluminum sine-wave fins. The coils include matched, factory-installed TXVs with matching distributor nozzles. Check valves and heat pump piping are also included in all 40RUQ units. Duplicate piping access holes on both sides of the unit eliminate drilling; condensate connections for both vertical and horizontal installations are also provided on both sides of the unit.

More Information
AirQuest Gemini 7.5 Ton Commercial Heat Pump Unit 208/230 Volt 3 Phase
Weight (in lbs) 483.000000
Manufacturer AirQuest
Cooling BTU 89,000
Heating BTU 87,000
Blower Motor Single Speed Motor
Drive Type Direct
Maximum CFM 3750
Decibel Level (dBA) 82 dB
Motor RPM 1100
Horsepower 1/4 HP
Refrigerant R410A
EER 11
Condenser Stages Single Stage
Compressor Type Scroll
Liquid Valve Size 1/2"
Suction Valve Size 1 1/8"
Electrical 208/230v 3 Phase 60 Hz
Phase Three Phase
Max Breaker Size 50 amps
Min. Breaker Size 34.3 amps
Tonnage 7.5 Ton
Certification AHRI Certified
Height 42 3/8"
Width 45 7/8"
Depth 59 3/8"
Warranty 5 Year Compressor Limited, 1 Year Parts Limited
Resources You will need Adobe Acrobat Reader to view PDF documents.
Safety Information PROPOSITION 65 WARNING
Write Your Own Review
You're reviewing:AirQuest Gemini 7.5 Ton Commercial Heat Pump Unit 208/230 Volt 3 Phase
Customer Questions
No Questions
Please, mind that only logged in users can submit questions

Why Buy From Us?

Customer Satisfaction

Our dedicated staff works hard to ensure that all orders are handled quickly and efficiently to ensure that you get what you ordered as quickly as possible.

 

Security

We provide a secure online shopping experience to protect your information. We also provide the option to checkout with PayPal to allow you to use a checkout service you are familiar with.

 

Save Money

Our low price guarantee provides you with confidence and piece of mind, knowing you purchased a quality product at a great price

 

See What Our Customers are Saying

Customer Reviews