Today's Hours 8am - 9pm est
The Mitsubishi Tri Zone Mini Split Systems are state of the art ductless mini split heat pump systems, providing both heating and cooling for your home. Rated between 16-20 SEER, with an inverter-driven compressor, this efficient system will keep operating costs down while providing year-round comfort. Each living space has its own air-handling unit and each unit has its own wireless electronic temperature controller.
The SLZ ceiling cassettes offer a 4-way air flow for amazing air distribution in a hidden style. Installed in a hard or in a 2’ x 2’ drop ceiling, the SLZ have built in condensate pumps for easy management.
The improved FH series wall mounted units create a more personalized home comfort solution. The 3D i-See Sensor uses infrared to sense heat signatures in the zone and direct warm or cool air where it is needed most. The FH series units can direct air both vertically and horizontally.
The standard GL series wall mounted units offer a slim profile and provide industry leading performance. With whisper-quiet operation, auto-restart, and a full range of capacities from 6-24 kBtu/h, the GL series units are the most popular units to pair with the MXZ condensers.
The SEZ concealed ducted units provide comfort hidden in a ceiling or under the floor. Using ducting and grills for the supply and return, these units combine traditional air handlers with the compact size and efficiency of a mini split.
The KJ floor mounted units feature a slim design that provides unrivalled heating and cooling at floor level. The KJ series are used in in rooms where low walls are available, such as in a sun room, replacing a radiator, or to preserve clean lines with a vaulted ceiling.
The Mitsubishi Ductless Mini Split MXZ Series Heat Pump and Air Conditioner Condenser has an INVERTER-driven compressor pump that cools or warms refrigerant and sends it inside to an air handler through small pipes. Each living space has its own air-handling unit and each unit has its own wireless electronic temperature controller.
With the Mitsubishi Ductless Mini Split MXZ Series Heat Pump Air Conditioner Multi zone condenser each room or zone operates independently with its own wireless or wired remote controller so people in different rooms can choose the temperature that makes them most comfortable. This unit will work with a variety of indoor unit combinations; with indoor options such as Wall mounted ductless, Floor mounted ductless, Ceiling recessed cassette ductless, horizontal ducted ductless or even multi position ducted air handlers.
Please note that in order to function, this air handler must be installed with a condenser and other installation equipment, available at an additional cost.
Manufactured as a ceiling-recessed air handler, the Mitsubishi SLZ-KF12NA is a space-saving air handler, specifically designed for small rooms or installations where wall-mounted units are impractical. With its integrated 4-direction airflow and fresh air intake knockouts, the SLZ-KF12NA can be used for both residential and light-commercial applications. Moreover, the air handler also has a built-in condensate lift mechanism to simplify the installation process, ensuring enhanced comfort built to last at a lower installation cost. Please note that the image shows an I-SEE sensor in the cassette grille, available at an additional cost. Without this upgrade, the grille will not include the enhanced functionality of more precisely redirecting the airflow of the unit.
Please note that in order to function, this air handler must be installed with a condenser, controller, and other installation equipment, also available for purchase.
With its enhanced operation features, the Mitsubishi MLZ-KP12NA ceiling cassette air handler provides superior heating and cooling to your room when paired with a compatible condenser, living up to Mitsubishi’s industry-leading comfort standards.
At 12,000 BTU BTU, the Mitsubishi MLZ-KP12NA air handler is suitable for up to a small room in ideal climates. Please note that in order for this air handler to function, a compatible condenser is required.
Installation and MaintenanceThe MLZ-KP12NA air handler has a small form factor, allowing it to fit between standard 16” joists, and with a depth of only 7-1/2”, accommodating your needs for almost any room. As a ceiling cassette, the unit can be installed in locations where wall or floor mounted units are not practical or desired. Please note that for all installations, a ceiling cassette grill is required, available at an additional cost.
Intelligent Comfort
The Mitsubishi MLZ-KP12NA brings quiet operation to enhanced comfort. With its multiple operating modes and multiple fan speeds, the MLZ-KP12NA air handler will heat and cool your room with ease and adjust the temperature more precisely to keep you comfortable.
Compatible Condensers
Please note that in order to function, this air handler must be installed with a condenser, controller, and other installation equipment, also available for purchase.
Please note that in order to function, this air handler must be installed with a condenser, controller, and other installation equipment, also available for purchase.
The Mitsubishi SEZ-KD12NA4 is a slim-ducted air handler compatible with both single and multi zone mini split equipment. Designed for use in applications where standard, whole-home air handlers are too large, this air handler can fit in a wide variety of tight locations such as crawlspaces. The unit can support small duct runs, or the unit can direct airflow directly into the space with no ductwork. All of the SEZ-KD12NA4’s features provide enhanced comfort to your home in a convenient form factor.
The Mitsubishi MSZ-GL12NA air handler is designed to be able to function as a single zone system or with a multi zone system setup. This unit is manufactured as part of Mitsubishi’s standard air handler series, making it an inexpensive choice for efficient home comfort. With its ability to work with both cooling-only and heat pump condensers, the MSZ-GL12NA can function in almost any basic configuration and application. The unit also has the ability to ramp up and down based on the thermostat’s needs along with an automated vertical air swing adjustment system to direct the airflow where it needs to go, keeping you comfortable year-round with the right condenser.
Please note that in order to function, this air handler must be installed with a condenser and other installation equipment, available at an additional cost.
Please note that in order to function, this air handler must be installed with a condenser and other installation equipment, available at an additional cost.
Manufactured as a ceiling-recessed air handler, the Mitsubishi SLZ-KF15NA is a space-saving air handler, specifically designed for small rooms or installations where wall-mounted units are impractical. With its integrated 4-direction airflow and fresh air intake knockouts, the SLZ-KF15NA can be used for both residential and light-commercial applications. Moreover, the air handler also has a built-in condensate lift mechanism to simplify the installation process, ensuring enhanced comfort built to last at a lower installation cost. Please note that the image shows an I-SEE sensor in the cassette grille, available at an additional cost. Without this upgrade, the grille will not include the enhanced functionality of more precisely redirecting the airflow of the unit.
Please note that in order to function, this air handler must be installed with a condenser, controller, and other installation equipment, also available for purchase.
Please note that in order to function, this air handler must be installed with a condenser, controller, and other installation equipment, also available for purchase.
The Mitsubishi SEZ-KD15NA4 is a slim-ducted air handler compatible with both single and multi zone mini split equipment. Designed for use in applications where standard, whole-home air handlers are too large, this air handler can fit in a wide variety of tight locations such as crawlspaces. The unit can support small duct runs, including branch-offs so that it can cover a couple of smaller rooms, or the unit can direct airflow directly into the space with no ductwork. All of the SEZ-KD15NA4’s features provide enhanced comfort to your home in a convenient form factor.
Please note that in order to function, this air handler must be installed with a condenser and other installation equipment, available at an additional cost.
The Mitsubishi MSZ-GL15NA air handler is designed to be able to function as a single zone system or with a multi zone system setup. This unit is manufactured as part of Mitsubishi’s standard air handler series, making it an inexpensive choice for efficient home comfort. With its ability to work with both cooling-only and heat pump condensers, the MSZ-GL15NA can function in almost any basic configuration and application. The unit also has the ability to ramp up and down based on the thermostat’s needs along with an automated vertical air swing adjustment system to direct the airflow where it needs to go, keeping you comfortable year-round with the right condenser.
With its enhanced operation features, the Mitsubishi MLZ-KP18NA ceiling cassette air handler provides superior heating and cooling to your room when paired with a compatible condenser, living up to Mitsubishi’s industry-leading comfort standards.
At 18,000 BTU BTU, the Mitsubishi MLZ-KP18NA air handler is suitable for up to a small room in ideal climates. Please note that in order for this air handler to function, a compatible condenser is required.
Installation and MaintenanceThe MLZ-KP18NA air handler has a small form factor, allowing it to fit between standard 16” joists, and with a depth of only 7-1/2”, accommodating your needs for almost any room. As a ceiling cassette, the unit can be installed in locations where wall or floor mounted units are not practical or desired. Please note that for all installations, a ceiling cassette grill is required, available at an additional cost.
Intelligent Comfort
The Mitsubishi MLZ-KP18NA brings quiet operation to enhanced comfort. With its multiple operating modes and multiple fan speeds, the MLZ-KP18NA air handler will heat and cool your room with ease and adjust the temperature more precisely to keep you comfortable.
Compatible Condensers
Please note that in order to function, this air handler must be installed with a condenser, controller, and other installation equipment, also available for purchase.
Please note that in order to function, this air handler must be installed with a condenser, controller, and other installation equipment, also available for purchase.
The Mitsubishi SEZ-KD18NA4 is a slim-ducted air handler compatible with both single and multi zone mini split equipment. Designed for use in applications where standard, whole-home air handlers are too large, this air handler can fit in a wide variety of tight locations such as crawlspaces. The unit can support small duct runs, including branch-offs so that it can cover a couple of smaller rooms, or the unit can direct airflow directly into the space with no ductwork. All of the SEZ-KD18NA4’s features provide enhanced comfort to your home in a convenient form factor.
Please note that in order to function, this air handler must be installed with a condenser and other installation equipment, available at an additional cost.
The Mitsubishi MSZ-GL18NA air handler is designed to be able to function as a single zone system or with a multi zone system setup. This unit is manufactured as part of Mitsubishi’s standard air handler series, making it an inexpensive choice for efficient home comfort. With its ability to work with both cooling-only and heat pump condensers, the MSZ-GL18NA can function in almost any basic configuration and application. The unit also has the ability to ramp up and down based on the thermostat’s needs along with an automated vertical air swing adjustment system to direct the airflow where it needs to go, keeping you comfortable year-round with the right condenser.
Please note that in order to function, this air handler must be installed with a condenser and other installation equipment, available at an additional cost.
The Mitsubishi MSZ-GL24NA air handler is designed to be able to function as a single zone system or with a multi zone system setup. This unit is manufactured as part of Mitsubishi’s standard air handler series, making it an inexpensive choice for efficient home comfort. With its ability to work with both cooling-only and heat pump condensers, the MSZ-GL24NA can function in almost any basic configuration and application. The unit also has the ability to ramp up and down based on the thermostat’s needs along with an automated vertical air swing adjustment system to direct the airflow where it needs to go, keeping you comfortable year-round with the right condenser.
The Mitsubishi MXZ-3C30NAHZ2 is a heat pump condenser designed to be used in multi zone system setups. As one air handler is needed per room that you are trying to heat and cool, multiple single zone condensers can take up a lot of space in your yard, making a multi zone unit more practical in many applications. With its integrated drain pan heater allowing it to heat down to -13°F, the MXZ-3C30NAHZ2 will keep you warm even through the coldest months of the year.
The Mitsubishi MXZ-3C30NAHZ2 is rated to handle a total of 30,000 BTU, which generally should be the same or greater than the total BTU count across all air handlers that this unit is paired with. In some instances, a certified pairing will have a higher BTU count total than this condenser’s rating. This is intentional, as the condenser can easily handle more, however anything higher than this rating can potentially lower the speed that the unit can heat and cool, as well as limit the functional outputs of each air handler if they are all running at the same time. Please note that in order to function, this heat pump condenser must be installed with compatible air handlers, controllers, and other installation equipment, available at an additional cost
Mitsubishi offers a 5 year parts and 7 year compressor warranty on all of its products. When the unit is registered online through the manufacturer after an installation that follows your state and local codes, the warranty is upgraded to a 10 year parts and compressor warranty.
With its variable speed compressor, the MXZ-3C30NAHZ2 can provide more precise adjustments to the covered spaces with the right air handlers. This also slightly improves electrical efficiency by ramping the compressor up and down based on the unit’s air handlers’ needs, as well as providing a more stable temperature output from the connected air handlers to provide superior comfort.
For ease of control, many air handlers that are compatible with the MXZ-3C30NAHZ2 can use any Mitsubishi-brand thermostat or adapter. The most convenient to control—the Kumo cloud WiFi adapter, found herethe Kumo cloud WiFi adapter, found here—allows each air handler to be accessed from anywhere that you have Internet. Please note that in most applications, you will need one thermostat or adapter per indoor air handler that you want to be able to control with it.
The Mitsubishi MXZ-SM36NAMHZ is a heat pump condenser designed to be used in multi zone system setups. As one air handler is needed per room that you are trying to heat and cool, multiple single zone condensers can take up a lot of space in your yard, making a multi zone unit more practical in many applications. With its integrated drain pan heater allowing it to heat down to 5°F, the MXZ-SM36NAMHZ will keep you warm even through the coldest months of the year.
The Mitsubishi MXZ-SM36NAMHZ is rated to handle a total of 36,000 BTU, which generally should be the same or greater than the total BTU count across all air handlers that this unit is paired with. In some instances, a certified pairing will have a higher BTU count total than this condenser’s rating. This is intentional, as the condenser can easily handle more, however anything higher than this rating can potentially lower the speed that the unit can heat and cool, as well as limit the functional outputs of each air handler if they are all running at the same time.
Mitsubishi offers a 5 year parts and 7 year compressor warranty on all of its products. When the unit is registered online through the manufacturer after an installation that follows your state and local codes, the warranty is upgraded to a 10 year parts and compressor warranty.
The Mitsubishi MXZ-SM36NAMHZ is designed with only one set of line set ports, allowing it to support a higher BTU output than units with multiple sets. As such, at least one branch box is required for this unit to function to allow it to connect to multiple air handlers. Along with branch boxes, this condenser requires air handlers, controllers, and other basic installation equipment to function, all of which are available at an additional cost.
With its variable speed compressor, the MXZ-SM36NAMHZ can provide more precise adjustments to the covered spaces with the right air handlers. This also slightly improves electrical efficiency by ramping the compressor up and down based on the unit’s air handlers’ needs, as well as providing a more stable temperature output from the connected air handlers to provide superior comfort.
For ease of control, many air handlers that are compatible with the MXZ-SM36NAMHZ can use any Mitsubishi-brand thermostat or adapter. The most convenient to control—the Kumo cloud WiFi adapter, found herethe Kumo cloud WiFi adapter, found here—allows each air handler to be accessed from anywhere that you have Internet. Please note that in most applications, you will need one thermostat or adapter per indoor air handler that you want to be able to control with it.
The Mitsubishi MXZ-4C36NA2 is a heat pump condenser designed to be used in multi zone system setups. As one air handler is needed per room that you are trying to heat and cool, multiple single zone condensers can take up a lot of space in your yard, making a multi zone unit more practical in many applications.
The Mitsubishi MXZ-4C36NA2 is rated at 36,000 BTU, which generally should be the same or greater than the total BTU count across all air handlers that this unit is paired with. In some instances, a certified pairing will have a higher BTU count total than this condenser’s rating. This is intentional, as the condenser can easily handle more, however anything higher than this rating can potentially lower the speed that the unit can heat and cool, as well as limit the functional outputs of each air handler if they are all running at the same time. Please note that in order to function, this heat pump condenser must be installed with compatible air handlers, controllers, and other installation equipment, available at an additional cost
Mitsubishi offers a 5 year parts and 7 year compressor warranty on all of its products. When the unit is registered online through the manufacturer after an installation that follows your state and local codes, the warranty is upgraded to a 10 year parts and compressor warranty.
With its variable speed compressor, the MXZ-4C36NA2 can provide more precise adjustments to the covered spaces with the right air handlers. This also slightly improves electrical efficiency by ramping the compressor up and down based on the unit’s air handlers’ needs, as well as providing a more stable temperature output from the connected air handlers to provide superior comfort.
For ease of control, many air handlers that are compatible with the MXZ-4C36NA2 can use any Mitsubishi-brand thermostat or adapter. The most convenient to control— the Kumo cloud WiFi adapter, found here—allows each air handler to be accessed from anywhere that you have Internet. Please note that in most applications, you will need one thermostat or adapter per indoor air handler that you want to be able to control with it.
The Mitsubishi MXZ-SM42NAMHZ-U1 is a heat pump condenser designed to be used in multi zone system setups. As one air handler is needed per room that you are trying to heat and cool, multiple single zone condensers can take up a lot of space in your yard, making a multi zone unit more practical in many applications. With its integrated drain pan heater allowing it to heat down to -13°F, the MXZ-SM42NAMHZ-U1 will keep you warm even through the coldest months of the year.
The Mitsubishi MXZ-SM42NAMHZ-U1 is rated to handle a total of 42,000 BTU, which generally should be the same or greater than the total BTU count across all air handlers that this unit is paired with. In some instances, a certified pairing will have a higher BTU count total than this condenser’s rating. This is intentional, as the condenser can easily handle more, however anything higher than this rating can potentially lower the speed that the unit can heat and cool, as well as limit the functional outputs of each air handler if they are all running at the same time.
Mitsubishi offers a 5 year parts and 7 year compressor warranty on all of its products. When the unit is registered online through the manufacturer after an installation that follows your state and local codes, the warranty is upgraded to a 10 year parts and compressor warranty.
The Mitsubishi MXZ-SM42NAMHZ-U1 is designed with only one set of line set ports, allowing it to support a higher BTU output than units with multiple sets. As such, at least one branch box is required for this unit to function to allow it to connect to multiple air handlers. Along with branch boxes, this condenser requires air handlers, controllers, and other basic installation equipment to function, all of which are available at an additional cost.
With its variable speed compressor, the MXZ-SM42NAMHZ-U1 can provide more precise adjustments to the covered spaces with the right air handlers. This also slightly improves electrical efficiency by ramping the compressor up and down based on the unit’s air handlers’ needs, as well as providing a more stable temperature output from the connected air handlers to provide superior comfort.
For ease of control, many air handlers that are compatible with the MXZ-SM42NAMHZ-U1 can use any Mitsubishi-brand thermostat or adapter. The most convenient to control—the Kumo cloud WiFi adapter, found here—allows each air handler to be accessed from anywhere that you have Internet. Please note that in most applications, you will need one thermostat or adapter per indoor air handler that you want to be able to control with it.
The Mitsubishi MXZ-5C42NA2-U1 is a heat pump condenser designed to be used in multi zone system setups. As one air handler is needed per room that you are trying to heat and cool, multiple single zone condensers can take up a lot of space in your yard, making a multi zone unit more practical in many applications.
The Mitsubishi MXZ-5C42NA2-U1 is rated at 42,000 BTU, which generally should be the same or greater than the total BTU count across all air handlers that this unit is paired with. In some instances, a certified pairing will have a higher BTU count total than this condenser’s rating. This is intentional, as the condenser can easily handle more, however anything higher than this rating can potentially lower the speed that the unit can heat and cool, as well as limit the functional outputs of each air handler if they are all running at the same time. Please note that in order to function, this heat pump condenser must be installed with compatible air handlers, controllers, and other installation equipment, available at an additional cost
Mitsubishi offers a 5 year parts and 7 year compressor warranty on all of its products. When the unit is registered online through the manufacturer after an installation that follows your state and local codes, the warranty is upgraded to a 10 year parts and compressor warranty.
With its variable speed compressor, the MXZ-5C42NA2-U1 can provide more precise adjustments to the covered spaces with the right air handlers. This also slightly improves electrical efficiency by ramping the compressor up and down based on the unit’s air handlers’ needs, as well as providing a more stable temperature output from the connected air handlers to provide superior comfort.
For ease of control, many air handlers that are compatible with the MXZ-5C42NA2-U1 can use any Mitsubishi-brand thermostat or adapter. The most convenient to control— the Kumo cloud WiFi adapter, found here—allows each air handler to be accessed from anywhere that you have Internet. Please note that in most applications, you will need one thermostat or adapter per indoor air handler that you want to be able to control with it.
The Mitsubishi MXZ-SM48NAMHZ-U1 is a heat pump condenser designed to be used in multi zone system setups. As one air handler is needed per room that you are trying to heat and cool, multiple single zone condensers can take up a lot of space in your yard, making a multi zone unit more practical in many applications. With its integrated drain pan heater allowing it to heat down to -13°F, the MXZ-SM48NAMHZ-U1 will keep you warm even through the coldest months of the year.
The Mitsubishi MXZ-SM48NAMHZ-U1 is rated to handle a total of 48,000 BTU, which generally should be the same or greater than the total BTU count across all air handlers that this unit is paired with. In some instances, a certified pairing will have a higher BTU count total than this condenser’s rating. This is intentional, as the condenser can easily handle more, however anything higher than this rating can potentially lower the speed that the unit can heat and cool, as well as limit the functional outputs of each air handler if they are all running at the same time.
Mitsubishi offers a 5 year parts and 7 year compressor warranty on all of its products. When the unit is registered online through the manufacturer after an installation that follows your state and local codes, the warranty is upgraded to a 10 year parts and compressor warranty.
The Mitsubishi MXZ-SM48NAMHZ-U1 is designed with only one set of line set ports, allowing it to support a higher BTU output than units with multiple sets. As such, at least one branch box is required for this unit to function to allow it to connect to multiple air handlers. Along with branch boxes, this condenser requires air handlers, controllers, and other basic installation equipment to function, all of which are available at an additional cost.
With its variable speed compressor, the MXZ-SM48NAMHZ-U1 can provide more precise adjustments to the covered spaces with the right air handlers. This also slightly improves electrical efficiency by ramping the compressor up and down based on the unit’s air handlers’ needs, as well as providing a more stable temperature output from the connected air handlers to provide superior comfort.
For ease of control, many air handlers that are compatible with the MXZ-SM48NAMHZ-U1 can use any Mitsubishi-brand thermostat or adapter. The most convenient to control—the Kumo cloud WiFi adapter, found herethe Kumo cloud WiFi adapter, found here—allows each air handler to be accessed from anywhere that you have Internet. Please note that in most applications, you will need one thermostat or adapter per indoor air handler that you want to be able to control with it.
Please note that in order to function, this air handler must be installed with a condenser and other installation equipment, available at an additional cost.
The Mitsubishi MSZ-GL06NA air handler is designed to be able to function as a single zone system or with a multi zone system setup. This unit is manufactured as part of Mitsubishi’s standard air handler series, making it an inexpensive choice for efficient home comfort. With its ability to work with both cooling-only and heat pump condensers, the MSZ-GL06NA can function in almost any basic configuration and application. The unit also has the ability to ramp up and down based on the thermostat’s needs along with an automated vertical air swing adjustment system to direct the airflow where it needs to go, keeping you comfortable year-round with the right condenser.
The Mitsubishi MXZ-SM60NAM-U1 is a heat pump condenser designed to be used in multi zone system setups. As one air handler is needed per room that you are trying to heat and cool, multiple single zone condensers can take up a lot of space in your yard, making a multi zone unit more practical in many applications.
The Mitsubishi MXZ-SM60NAM-U1 is rated to handle a total of 60,000 BTU, which generally should be the same or greater than the total BTU count across all air handlers that this unit is paired with. In some instances, a certified pairing will have a higher BTU count total than this condenser’s rating. This is intentional, as the condenser can easily handle more, however anything higher than this rating can potentially lower the speed that the unit can heat and cool, as well as limit the functional outputs of each air handler if they are all running at the same time.
Mitsubishi offers a 5 year parts and 7 year compressor warranty on all of its products. When the unit is registered online through the manufacturer after an installation that follows your state and local codes, the warranty is upgraded to a 10 year parts and compressor warranty.
The Mitsubishi MXZ-SM60NAM-U1 is designed with only one set of line set ports, allowing it to support a higher BTU output than units with multiple sets. As such, at least one branch box is required for this unit to function to allow it to connect to multiple air handlers. Along with branch boxes, this condenser requires air handlers, controllers, and other basic installation equipment to function, all of which are available at an additional cost.
With its variable speed compressor, the MXZ-SM60NAM-U1 can provide more precise adjustments to the covered spaces with the right air handlers. This also slightly improves electrical efficiency by ramping the compressor up and down based on the unit’s air handlers’ needs, as well as providing a more stable temperature output from the connected air handlers to provide superior comfort.
For ease of control, many air handlers that are compatible with the MXZ-SM60NAM-U1 can use any Mitsubishi-brand thermostat or adapter. The most convenient to control—the Kumo cloud WiFi adapter, found herethe Kumo cloud WiFi adapter, found here—allows each air handler to be accessed from anywhere that you have Internet. Please note that in most applications, you will need one thermostat or adapter per indoor air handler that you want to be able to control with it.
Please note that in order to function, this air handler must be installed with a condenser and other installation equipment, available at an additional cost.
Manufactured as a ceiling-recessed air handler, the Mitsubishi SLZ-KF09NA is a space-saving air handler, specifically designed for small rooms or installations where wall-mounted units are impractical. With its integrated 4-direction airflow and fresh air intake knockouts, the SLZ-KF09NA can be used for both residential and light-commercial applications. Moreover, the air handler also has a built-in condensate lift mechanism to simplify the installation process, ensuring enhanced comfort built to last at a lower installation cost. Please note that the image shows an I-SEE sensor in the cassette grille, available at an additional cost. Without this upgrade, the grille will not include the enhanced functionality of more precisely redirecting the airflow of the unit.
Please note that in order to function, this air handler must be installed with a condenser, controller, and other installation equipment, also available for purchase.
With its enhanced operation features, the Mitsubishi MLZ-KP09NA ceiling cassette air handler provides superior heating and cooling to your room when paired with a compatible condenser, living up to Mitsubishi’s industry-leading comfort standards.
At 9,000 BTU BTU, the Mitsubishi MLZ-KP09NA air handler is suitable for up to a small room in ideal climates. Please note that in order for this air handler to function, a compatible condenser is required.
Installation and MaintenanceThe MLZ-KP09NA air handler has a small form factor, allowing it to fit between standard 16” joists, and with a depth of only 7-1/2”, accommodating your needs for almost any room. As a ceiling cassette, the unit can be installed in locations where wall or floor mounted units are not practical or desired. Please note that for all installations, a ceiling cassette grill is required, available at an additional cost.
Intelligent Comfort
The Mitsubishi MLZ-KP09NA brings quiet operation to enhanced comfort. With its multiple operating modes and multiple fan speeds, the MLZ-KP09NA air handler will heat and cool your room with ease and adjust the temperature more precisely to keep you comfortable.
Compatible Condensers
Please note that in order to function, this air handler must be installed with a condenser, controller, and other installation equipment, also available for purchase.
Please note that in order to function, this air handler must be installed with a condenser, controller, and other installation equipment, also available for purchase.
The Mitsubishi SEZ-KD09NA4 is a slim-ducted air handler compatible with both single and multi zone mini split equipment. Designed for use in applications where standard, whole-home air handlers are too large, this air handler can fit in a wide variety of tight locations such as crawlspaces. The unit can support small duct runs, or the unit can direct airflow directly into the space with no ductwork. All of the SEZ-KD09NA4’s features provide enhanced comfort to your home in a convenient form factor.
The Mitsubishi MSZ-GL09NA air handler is designed to be able to function as a single zone system or with a multi zone system setup. This unit is manufactured as part of Mitsubishi’s standard air handler series, making it an inexpensive choice for efficient home comfort. With its ability to work with both cooling-only and heat pump condensers, the MSZ-GL09NA can function in almost any basic configuration and application. The unit also has the ability to ramp up and down based on the thermostat’s needs along with an automated vertical air swing adjustment system to direct the airflow where it needs to go, keeping you comfortable year-round with the right condenser.
Please note that in order to function, this air handler must be installed with a condenser and other installation equipment, available at an additional cost.
The Mitsubishi MXZ-3C24NAHZ2 is a heat pump condenser designed to be used in multi zone system setups. As one air handler is needed per room that you are trying to heat and cool, multiple single zone condensers can take up a lot of space in your yard, making a multi zone unit more practical in many applications. With its integrated drain pan heater allowing it to heat down to -13°F, the MXZ-3C24NAHZ2 will keep you warm even through the coldest months of the year.
The Mitsubishi MXZ-3C24NAHZ2 is rated to handle a total of 24,000 BTU, which generally should be the same or greater than the total BTU count across all air handlers that this unit is paired with. In some instances, a certified pairing will have a higher BTU count total than this condenser’s rating. This is intentional, as the condenser can easily handle more, however anything higher than this rating can potentially lower the speed that the unit can heat and cool, as well as limit the functional outputs of each air handler if they are all running at the same time. Please note that in order to function, this heat pump condenser must be installed with compatible air handlers, controllers, and other installation equipment, available at an additional cost
Mitsubishi offers a 5 year parts and 7 year compressor warranty on all of its products. When the unit is registered online through the manufacturer after an installation that follows your state and local codes, the warranty is upgraded to a 10 year parts and compressor warranty.
With its variable speed compressor, the MXZ-3C24NAHZ2 can provide more precise adjustments to the covered spaces with the right air handlers. This also slightly improves electrical efficiency by ramping the compressor up and down based on the unit’s air handlers’ needs, as well as providing a more stable temperature output from the connected air handlers to provide superior comfort.
For ease of control, many air handlers that are compatible with the MXZ-3C24NAHZ2 can use any Mitsubishi-brand thermostat or adapter. The most convenient to control—the Kumo cloud WiFi adapter, found herethe Kumo cloud WiFi adapter, found here—allows each air handler to be accessed from anywhere that you have Internet. Please note that in most applications, you will need one thermostat or adapter per indoor air handler that you want to be able to control with it.
The Mitsubishi MXZ-3C30NA2 is a heat pump condenser designed to be used in multi zone system setups. As one air handler is needed per room that you are trying to heat and cool, multiple single zone condensers can take up a lot of space in your yard, making a multi zone unit more practical in many applications.
The Mitsubishi MXZ-3C30NA2 is rated at 30,000 BTU, which generally should be the same or greater than the total BTU count across all air handlers that this unit is paired with. In some instances, a certified pairing will have a higher BTU count total than this condenser’s rating. This is intentional, as the condenser can easily handle more, however anything higher than this rating can potentially lower the speed that the unit can heat and cool, as well as limit the functional outputs of each air handler if they are all running at the same time. Please note that in order to function, this heat pump condenser must be installed with compatible air handlers, controllers, and other installation equipment, available at an additional cost
Mitsubishi offers a 5 year parts and 7 year compressor warranty on all of its products. When the unit is registered online through the manufacturer after an installation that follows your state and local codes, the warranty is upgraded to a 10 year parts and compressor warranty.
With its variable speed compressor, the MXZ-3C30NA2 can provide more precise adjustments to the covered spaces with the right air handlers. This also slightly improves electrical efficiency by ramping the compressor up and down based on the unit’s air handlers’ needs, as well as providing a more stable temperature output from the connected air handlers to provide superior comfort.
For ease of control, many air handlers that are compatible with the MXZ-3C30NA2 can use any Mitsubishi-brand thermostat or adapter. The most convenient to control— the Kumo cloud WiFi adapter, found here—allows each air handler to be accessed from anywhere that you have Internet. Please note that in most applications, you will need one thermostat or adapter per indoor air handler that you want to be able to control with it.
| Mitsubishi Tri Zone Mini Split System - Design Your Own | |
|---|---|
| SKU | Mitsubishi Tri Zone |
| Brand/Manufacturer | Mitsubishi |
| Refrigerant | R410A |
Mitsubishi Electric’s technologically advanced mini-split air conditioners and heat pumps can provide superior comfort, lower energy costs, zero emissions, and ultra-quiet heating and air conditioning in any climate.
Our mission is simple: To provide an open HVAC marketplace online, offering the best HVAC brands directly to the public, based on real, affordable prices. For too long, local dealers have charged whatever they could get away with - but now YOU HAVE A CHOICE.
Choose us for:
We sell products at wholesale pricing. No markups, no hidden fees. Our average customer saves BETWEEN THREE TO SIX THOUSAND DOLLARS
-That's the Direct Advantage!
Just because a brand is nationally known, doesn't mean it's the best. Our HVAC technicians have hand-selected the most efficient and durable products for American homeowners, giving you exactly what you need at the best pricing.
We choose products with long, best-in-the-market warranties by manufacturers with great customer service and solid reputations. This gives you peace of mind that you'll be getting a great quality product.
We've helped over 100,000 American homeowners and earned their trust.
