1-800-397-1392
Today's Hours 8am - 9pm est
Today's Hours - Open until 9pm est
Today's Hours 8am - 9pm est
Designed to exhaust fumes from highly corrosive environments with 4 sizes available from 3" to 6" inlet/outlet. It is an excellent system for Scrubber Applications and other systems requiring low airflow at higher static pressure. Suitable for many applications such as acid tank ventilation, hood exhaust, commercial washers wastewater, chemical cabinets/rooms, etc.
Features
Designed to exhaust fumes from highly corrosive environments with 4 sizes available from 3" to 6" inlet/outlet. It is an excellent system for Scrubber Applications and other systems requiring low airflow at higher static pressure. Suitable for many applications such as acid tank ventilation, hood exhaust, commercial washers wastewater, chemical cabinets/rooms, etc.
Storm Series Carbon Impregnated Polypropylene (CIP) blowers designed to work in highly corrosive air exhaust applications containing potentially explosive atmospheres.
Alternate Model Number: STORM14XT2P-CIP
Plastec enamel coated metal motor support stand for models Storm 14, P25.
Features
| Plastec Storm 14 Series Direct Drive Forward Curve Blower Hazardous Location 1.5 HP 800 CFM 3 Phase - STORM14XT2P-CIP | |
|---|---|
| SKU | S14XT2P150 |
| Weight (in lbs) | 81.000000 |
| Brand/Manufacturer | Plastec |
| Additional Information | UL Listed and CSA Certified |
| Additional Information | For Hazardous Locations |
| Additional Information | Carbon Impregnated Polypropylene (CIP) Housing Assembly |
| Blower Motor | 3 Phase Explosion Proof |
| Drive Type | Direct |
| Static Pressure | 14 inWg |
| Maximum CFM | 800 |
| Decibel Level (dBA) | 81.8 |
| Wheel Size | 9.75" |
| Motor RPM | 3450 |
| Horsepower | 1.5 |
| Horsepower | 1.5 HP |
| Electrical | 60 Hz |
| Amperage Requirement | 7.2 |
| Height | 19.52 |
| Width | 16.53 |
| Depth | 19.05 |
| Resources | You will need Adobe® Acrobat® Reader to view PDF documents |
| Safety Information | PROPOSITION 65 WARNING |
| Plastec Enamel Coated Metal Motor Support Stand for Models Storm 14, P25 | |
| SKU | MB251 |
| Weight (in lbs) | 5.000000 |
| Brand/Manufacturer | Plastec |
| Resources | |
| Safety Information | PROPOSITION 65 WARNING |
