3 Ton 14 SEER Goodman Heat Pump Air Conditioner System

The Goodman® GSZ14 14 SEER Heat Pump uses the environmentally friendly refrigerant R-410A and features operating sound levels that are among the best in the heating and cooling industry. R-410A is chlorine-free to help prevent damage to the ozone layer. With its 14 SEER rating, the GSZ14 will help reduce energy consumption throughout the life of the system.

All Goodman 14 / 15 SEER heat pumps must be installed with a bi-flow thermostatic expansion valve. This valve is installed in front of the indoor evaporator coil inline with the line set piping. If you are installing a heat pump with a backup heat source which will be a fuel furnace, you will need to install an electronic all fuel kit.

Please note that this heat pump equipment comes pre-charged with R-410A liquid refrigerant and by Federal law cannot be released to the atmosphere. Yes, you can purchase this equipment without being EPA certified. And, if you are mechanically inclined you may perform about 90% of the equipment installation yourself. However, we strongly recommend to have a professional heating/cooling contractor do the final part of the installation including managing the refrigerant. An HVAC contractor has the tools and know-how to do this work.

 Standard Features

• R-410A chlorine-free refrigerant
• High-efficiency scroll compressor
• SmartShift® technology to ensure quiet reliable defrost
• Factory-installed bi-flow liquid-line filter drier
• Factory-installed suction-line accumulator
• Factory-installed compressor crankcase heater
• Factory-installed high-capacity muffler
• High- and low-pressure switches
• Service valves with sweat connections and easy access to gauge ports
• Copper tube/enhanced aluminum fin coil
• Fully charged for 15’ of tubing length
• Contactor with lug connection
• Ground lug connection
• AHRI Certified; ETL Listed

Cabinet Features

• Goodman® brand sound control top design
• Steel louver coil guard
• Heavy-gauge galvanized-steel cabinet
• Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
• Top and side maintenance access
• Service ports and controls are accessible while unit is operating
• When properly anchored, meets the 2010
• Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)

The Goodman ARUF Multi-Position Air Handler is suitable for use with R-410A refrigerant and may be installed in a variety of locations.  This air handler features a SmartFrame™ sub-structure that adds lateral stability, mounting locations for internal components, and additional insulation retention.

Standard Features

• All-aluminum evaporator coil
• Check flowrater expansion device for cooling-only and heat pump applications
• Direct-drive, multi-speed motor
• Transformer and blower time-delay on all units
• Easy single-bulb UV light compatibility
• Complies with the Factory-sealed Air Handling Credit with or without field-installed filter kits as listed in the 2001 Florida Building Code, Chapter 13, Section 610.2.A.2.1
• AHRI Certified; ETL Listed

Cabinet Features

• New rigid SmartFrame™ cabinet
• 21 inch depth for easy attic access
• Galvanized leather grain-embossed finish
• Glue-less cabinet insulation retention
• Screw-less sides & back prevents condensation
• Multi-position capability: upflow, downflow, horizontal or vertical
• Coil-mounting track for quick repositioning
• Tool-less filter access accommodates standard-size filters
• Power supply entry at top; low-voltage entry at top and on left side
• Easily convertible 4-way design
• Multiple electrical knockouts
• Heavy-gauge bottom plate