We use cookies to make your experience better.To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies.Learn more.
This 2 ton MRCOOL VersaPro 2nd Gen central ducted heat pump system combines an inverter-driven condenser with a multi-positional air handler for electric heating and cooling throughout the home. Rated at 18.1 SEER2 and generally suited for homes around 1,000–1,300 sq. ft., the system automatically adjusts compressor output as comfort needs change while a Variable DC Blower distributes conditioned air through the home's ductwork. Compatible No-Vac® Quick Connect® pre-charged line sets simplify DIY installation.
Key Benefits
18.1 SEER2 Efficiency: Helps lower heating and cooling energy costs.
Sized for Approximately 1,000–1,300 sq. ft.: Provides a practical starting point for system selection.
Inverter Heating and Cooling: Automatically adjusts output to help maintain more consistent indoor temperatures.
DIY Installation: No-Vac® Quick Connect® pre-charged line sets simplify system connections.
Gold Fin Condenser Coil: Helps protect the outdoor coil against corrosion.
Multi-Positional Air Handler: Supports upflow, downflow, and horizontal installation.
Variable DC Blower: Supports consistent airflow throughout the home.
MRCOOL Wired Smart Thermostat Included: Provides convenient system control.
Inverter Performance for More Consistent Comfort
The inverter-driven compressor automatically adjusts output as heating and cooling needs change. The Variable DC Blower works alongside the condenser to distribute conditioned air more consistently through the home's ductwork.
Efficiency Choices for Every Climate
This VersaPro configuration is Cold Climate rated, providing a stronger fit for homes that experience colder winter conditions while maintaining efficient cooling performance in warmer weather.
DIY Installation with Pre-Charged No-Vac® Line Sets
Compatible No-Vac® Quick Connect® pre-charged line sets simplify the refrigerant connection between the VersaPro condenser and air handler, supporting MRCOOL DIY installation without a traditional evacuated line-set connection.
Gold Fin Condenser Coil Protection
A durable Gold Fin coating helps protect the outdoor condenser coil against corrosion, moisture, and everyday outdoor exposure. This added protection helps preserve the coil surface and supports reliable heat-transfer performance over time.
Flexible Multi-Positional Air Handler
The included air handler supports upflow, downflow, and horizontal installation. Its Variable DC Blower works with the inverter condenser to help provide consistent airflow and temperature control throughout the home's central duct system.
Optional Electric Heat
Compatible electric heat kits up to 10 kW can be added through the air handler to provide supplemental or backup electric heat when additional heating support is needed.
Reliable Whole-Home Comfort with the MRCOOL VersaPro Series
The MRCOOL VersaPro Series delivers dependable heating and cooling through a traditional ducted HVAC system, making it an excellent choice for homeowners replacing an existing central air conditioner or heat pump. Designed for reliable performance and compatibility with many existing duct systems, VersaPro offers an easy path to energy-efficient whole-home comfort without the complexity of a complete HVAC redesign.
With its practical design, efficient operation, and year-round performance, the VersaPro Series provides a smart balance of value, reliability, and everyday comfort for residential HVAC replacement projects.
Warranty
MRCOOL VersaPro 2nd Gen provides a 10-year limited parts and compressor warranty when the equipment meets the manufacturer's warranty requirements and is installed with approved compatible equipment.
What’s Included
MRCOOL VersaPro 2nd Gen Heat Pump Condenser
MRCOOL Multi-Positional Air Handler
MRCOOL Wired Smart Thermostat
Recommended Accessories
No-Vac® Quick Connect® Pre-Charged Line Set: Simplifies DIY refrigerant connections.
Electric Heat Kit: Adds backup or supplemental electric heat. Select a compatible option up to 10 kW.
Condenser Installation Kit: Provides common materials needed for outdoor-unit installation.
Condenser Mounting: Select an appropriate equipment pad or mounting solution.
Optional Dehumidifier: Adds extra humidity control when needed.
Requirements & Considerations
Home Sizing: The 1,000–1,300 sq. ft. guideline is a general estimate. Proper HVAC sizing should account for climate, insulation, windows, ductwork, ceiling height, and other home characteristics.
Electrical Requirements: Both indoor and outdoor equipment require appropriately sized dedicated electrical circuits.
Installation: Follow MRCOOL instructions for equipment placement, electrical connections, condensate drainage, ductwork, and refrigerant-line installation.
R454B Refrigerant Notice
This system uses R454B, an A2L refrigerant. Compatible R454B equipment and accessories must be used, and installation and service must follow manufacturer instructions and applicable refrigerant safety requirements.
MRCOOL DIY 2 Ton VersaPro 2nd Gen Central Ducted Condenser - R454B
Efficient Heating and Cooling with MRCOOL VersaPro
This 2 ton MRCOOL VersaPro 2nd Gen heat pump condenser provides efficient electric heating and cooling when installed with its matching air handler. Rated at 18.1 SEER2, the inverter-driven compressor automatically adjusts its output as heating and cooling needs change to help maintain consistent temperatures while supporting efficient operation. VersaPro also supports DIY installation with compatible No-Vac® Quick Connect® pre-charged line sets.
Key Benefits
18.1 SEER2 Efficiency: Helps lower energy costs when installed with its matching air handler.
Inverter-Driven Compressor: Automatically adjusts output for more consistent temperatures.
Low-Temperature Heating: Continues providing electric heat as outdoor temperatures fall.
Gold Fin Condenser Coil: Corrosion-resistant coating helps protect the outdoor coil.
Quiet Operation: Designed for quieter outdoor operation.
Inverter Technology for Variable-Speed Heating and Cooling
The inverter compressor automatically adjusts its output as heating and cooling needs change instead of running only at full power. This helps maintain steadier temperatures and reduces repeated starts and stops.
Efficiency Choices for Every Climate
Heat pump performance changes as outdoor temperatures fall, so climate and winter heating needs should be considered when selecting the right system size and series for the home.
DIY Installation with Pre-Charged No-Vac® Line Sets
Compatible MRCOOL No-Vac® Quick Connect® line sets are pre-charged to simplify refrigerant connections between the condenser and its matching air handler, supporting DIY installation without a traditional evacuated line-set connection.
Warranty
MRCOOL VersaPro 2nd Gen provides a 10-year limited parts and compressor warranty when the equipment meets the manufacturer's warranty requirements and is installed with approved compatible equipment.
Included Items
MRCOOL VersaPro 2nd Gen Heat Pump Condenser
Recommended Accessories
No-Vac® Quick Connect® Pre-Charged Line Set: Simplifies DIY refrigerant connections between indoor and outdoor equipment.
Condenser Installation Kit: Provides common materials needed for outdoor installation.
Condenser Mounting: Select an appropriate equipment pad or mounting solution.
Requirements & Considerations
Matching Air Handler Required: Install with its matching MRCOOL VersaPro air handler.
Electrical Requirements: Requires a properly sized dedicated 208/230V electrical circuit according to equipment specifications and local codes.
Installation: Follow MRCOOL installation instructions for DIY or professional installation.
R454B Refrigerant Notice
This condenser uses R454B, an A2L refrigerant. Compatible R454B equipment and accessories must be used, and installation and service must follow manufacturer instructions and applicable refrigerant safety requirements.
MRCOOL DIY 2 Ton VersaPro 2nd Gen Central Ducted Air Handler - R454B
Flexible Airflow for MRCOOL Central Comfort
This 2 ton MRCOOL air handler distributes conditioned air through a central duct system when paired with a compatible MRCOOL heat pump condenser. Its 17.5-inch-wide cabinet supports upflow, downflow, and horizontal installation, while the Variable DC Blower helps provide steady airflow throughout the home. The air handler works with rated VersaPro 2nd Gen and Central Ducted Hyper Heat 2nd Gen condensers.
Key Benefits
17.5-Inch Cabinet: Provides a compact footprint for central ducted installations.
Multi-Positional Design: Supports upflow, downflow, and horizontal installation.
Variable DC Blower: Works with compatible inverter condensers to provide consistent airflow.
Compatible with Two MRCOOL Series: Works with rated VersaPro 2nd Gen and Central Ducted Hyper Heat 2nd Gen condensers.
Optional Electric Heat: Supports compatible heat kits up to 10 kW for supplemental or backup heating.
Manufactured Home Approved: Approved for manufactured and mobile-home applications where installation requirements are met.
Flexible Multi-Positional Installation
The air handler can be installed in upflow, downflow, or horizontal configurations, providing straightforward flexibility when adapting the equipment to different duct arrangements or installation locations.
Variable DC Blower for Consistent Airflow
The Variable DC Blower can change airflow as the connected inverter system operates rather than moving air at only one fixed level. This helps distribute heating and cooling more consistently throughout the home.
Optional Electric Heating
Compatible electric heat kits up to 10 kW can be added through the air handler to provide supplemental or backup electric heat when additional heating support is needed.
Warranty
Warranty coverage applies when the air handler is installed with approved compatible MRCOOL equipment and meets the manufacturer's warranty and registration requirements.
Included Items
MRCOOL Multi-Positional Air Handler
Recommended Accessories
Electric Heat Kit: Adds compatible backup or supplemental electric heating. Select an option up to 10 kW.
Drain and Installation Accessories: Select the materials needed for condensate drainage and the specific installation.
Requirements & Considerations
Outdoor Equipment Required: Pair with a rated VersaPro 2nd Gen or Central Ducted Hyper Heat 2nd Gen condenser.
Electrical Requirements: Requires 208/230V single-phase power. Exact circuit requirements vary by air-handler size and installed heat kit.
Ductwork Required: Designed for central ducted applications.
R454B Refrigerant Notice
This air handler uses R454B, an A2L refrigerant. Compatible R454B equipment and accessories must be used, and installation and service must follow manufacturer instructions and applicable refrigerant safety requirements.
No-Vac Precharged Refrigerant Line Set with 3/8" and 3/4" Line Ends - 15 Feet - R454B
The NV15-3834-O is a 15' long 3/8" x 3/4" pre-charged line set for use only with the MRCOOL universal condensers and air handlers. The specialized quick connect fittings allow the MRCOOL heat pump system to be installed using only a wrench; no vacuum pump, gauges, flaring, or brazing required.
Features:
Includes one pair of heavy duty refrigerant lines
Precharged with R454B Refrigerant
Kink Resistant
Simple Secure Quick Connect
UV Protected Insulation
Reduced installation time
No vacuum required
Leak proof
The communication wire (sku CW-144) is not included
Installation Kit for Condensers
Ensure a professional and secure installation for your condenser with this comprehensive installation kit. Designed to provide all the essential components needed for a smooth setup, this kit helps protect your system while ensuring proper electrical and refrigerant connections.
What’s Included:
3/4" x 6' Electrical Whip – SKU: 84138
60A Non-Fused Disconnect – SKU: 83335
Surge Protector – SKU: ICM517
CPS Charging Adapter – SKU: 87-AD87
Telescoping Wall Sleeve – SKU: NFP-75
Equip your condenser with everything needed for a safe, durable, and professional installation. Order your Condenser Installation Kit today!
30" Wall Mount Bracket
This wall mount bracket is perfect for outdoor condensers. The length of the wall bracket arms are 30" long. The condensing unit is mounted onto the L-shaped brackets and fastened using bolts and anti-vibration washers (not included with brackets).
Features:
Steel: 10 GA
Powder-coated grey Finish
Load rating: 600 lbs per pair
Holes will accommodate anchors for installation
Warranty: 1 year
ACB line of wall brackets are approved by the Florida Building Commission and are High Velocity Hurricane Zone (HVHZ) approved. (See product certification documentation for complete details.)
No Return Policy
All sales of this product are final and are non-refundable.
5 kW Electric Heat Kit for MRCOOL Air Handlers
The MRCOOL MVPHK05 is a 5kW supplemental electric heat kit for use only with MRCOOL full size air handlers. Circuit breaker included.
Santa Fe Ultra70 Whole-Home Ventilating Dehumidifier, 70-pint | R454B
OVERVIEW
The Santa Fe Ultra70 was the first compact whole house ventilating dehumidifier built for tight, low-clearance installs. It removes up to 70 pints of moisture per day and covers homes up to 1,800 square feet, which makes it a strong match for smaller houses, condos, and apartments.
Ducted into your HVAC system, the Ultra70 controls humidity everywhere at once instead of one room at a time. That means no musty basement smell, no clammy upstairs bedrooms, and no conditions that let mold and wood rot get started.
The cabinet measures 12" W x 12" H x 28" L and converts between horizontal and vertical airflow discharge, so it works in mechanical rooms, closets, attics, basements, and crawl spaces alike. Now running R454B refrigerant, it exceeds Department of Energy efficiency standards and is built at Santa Fe's headquarters in Madison, Wisconsin.
Key Features:
70 Pints Per Day – Whole-home moisture control for spaces up to 1,800 sq. ft.
Optional Fresh Air Ventilation – Duct outdoor air in to dilute indoor pollutants
MERV-13 Filtration – Standard filter captures fine airborne particles
Convertible Discharge – Rotate the panel for horizontal or vertical airflow
Compact 12" x 12" x 28" Cabinet – Fits where standard units can't
R454B Refrigerant – Exceeds DOE efficiency standards
115V / 5.4 Amps – Plugs into a standard grounded outlet
Made in Madison, Wisconsin – Heavy-duty steel construction
Customized Installation and Operation
The Ultra70 gives you three ways to install it. Tie it into your existing HVAC system with a dedicated 8" return and a supply connection with backdraft damper. Run it on its own separate ductwork. Or set it freestanding in a basement or crawl space when ducting isn't practical.
Both the return air inlet and supply air outlet use 8" duct collars. The back panel comes configured for horizontal flow through and rotates for vertical flow through with a T20 torx bit, which is what lets the same unit work in an attic, a closet, or under a floor.
Fresh air ventilation is optional and simple to add. A "T" into the inlet duct brings outdoor air into the system to dilute pollutants and maintain normal oxygen levels indoors, and the volume is adjustable with a range of dampers and controls.
HVAC Integration – Dedicated return plus ducted supply to the air handler
Dedicated Ducting – Runs on its own duct system independent of HVAC
Freestanding Operation – Works standalone in basements and crawl spaces
Optional Outdoor Air – Ventilation duct T's into the inlet, regulated by dampers and controls
Continuous Drain – Gravity drainage, no manual emptying
Warranty Information
Santa Fe warrants the Ultra70 Dehumidifier to be free from defects in materials and workmanship. The unit includes a 5-year limited warranty, with extended coverage on select components. Warranty coverage may vary based on installation, application, and registration requirements. Refer to the manufacturer’s documentation for complete warranty details.
Premium Materials & Construction
Dehumidifiers live in the roughest parts of a house. The Ultra70 is built from heavy-duty steel with components chosen to hold up to damp air, dust, and temperature swings over years of runtime.
Inside, a high-efficiency refrigeration coil, compressor, and fan work together to pull more moisture using about 15% less energy than comparably sized units. The R454B refrigerant charge lowers the environmental impact compared to earlier models while keeping performance where it needs to be.
The MERV-13 filter comes standard and pulls fine particles out of the airstream as the unit works. Vacuum it regularly and swap it every six months. The unit operates between 49°F and 95°F, plugs into a standard 115V grounded outlet at 5.4 amps, and ships with a 9 ft. cord.
Why Choose the Santa Fe Ultra70 Whole House Dehumidifier?
Whole-Home Moisture Control
Removes up to 70 pints per day across homes up to 1,800 square feet.
Ducted operation treats every room instead of chasing humidity one space at a time.
Fits Where Others Won't
Compact 12" x 12" x 28" cabinet handles low-clearance installs.
Convertible horizontal or vertical discharge solves tricky duct layouts.
Ventilation and Filtration Built In
Optional fresh outdoor air ducting dilutes indoor pollutants.
Standard MERV-13 filter captures fine airborne particles.
Efficiency You Can Measure
Exceeds Department of Energy standards with R454B refrigerant.
High-efficiency coil, compressor, and fan use roughly 15% less energy than similar units.
Built to Last
Heavy-duty steel construction, assembled in Madison, Wisconsin.
Continuous drainage and minimal maintenance for set-and-forget operation.
No-Vac Precharged Refrigerant Line Set with 3/8" and 3/4" Line Ends - 25 Feet - R454B
The NV25-3834-O is a 25' long 3/8" x 3/4" pre-charged line set for use only with the MRCOOL universal condensers and air handlers. The specialized quick connect fittings allow the MRCOOL heat pump system to be installed using only a wrench; no vacuum pump, gauges, flaring, or brazing required.
Features:
Includes one pair of heavy duty refrigerant lines
Precharged with R454B Refrigerant
Kink Resistant
Simple Secure Quick Connect
UV Protected Insulation
Reduced installation time
No vacuum required
Leak proof
The communication wire (sku CW-144) is not included
17" Wall Mount Bracket for Mini Split Systems
This wall mount bracket is perfect for outdoor mini split condensers. The length of the the wall bracket arms are 17” long. The condensing unit is mounted onto the L-shaped brackets and fastened using the bolts and anti-vibration washers provided.
Features:
17” Arm Length
Weight capacity of 220 lbs per arm
Bolts and anti-vibration washers included
No Return Policy
All sales of this product are final and are non-refundable.
8 kW Electric Heat Kit for MRCOOL Air Handlers
The MRCOOL MVPHK08 is an 8kW supplemental electric heat kit for use only with MRCOOL full size air handlers. Circuit breaker included.
No-Vac Precharged Refrigerant Line Set with 3/8" and 3/4" Line Ends - 35 Feet - R454B
The NV35-3834-O is a 35' long 3/8" x 3/4" pre-charged line set for use only with the MRCOOL universal condensers and air handlers. The specialized quick connect fittings allow the MRCOOL heat pump system to be installed using only a wrench; no vacuum pump, gauges, flaring, or brazing required.
Features:
Includes one pair of heavy duty refrigerant lines
Precharged with R454B Refrigerant
Kink Resistant
Simple Secure Quick Connect
UV Protected Insulation
Reduced installation time
No vacuum required
Leak proof
The communication wire (sku CW-144) is not included
10 kW Electric Heat Kit for MRCOOL Air Handlers
The MRCOOL MVPHK10 is a 10kW supplemental electric heat kit for use only with MRCOOL full size air handlers. Circuit breaker included.
No-Vac Precharged Refrigerant Line Set with 3/8" and 3/4" Line Ends - 50 Feet - R454B
The NV50-3834-O is a 50' long 3/8" x 3/4" pre-charged line set for use only with the MRCOOL universal condensers and air handlers. The specialized quick connect fittings allow the MRCOOL heat pump system to be installed using only a wrench; no vacuum pump, gauges, flaring, or brazing required.
Features:
Includes one pair of heavy duty refrigerant lines
Precharged with R454B Refrigerant
Kink Resistant
Simple Secure Quick Connect
UV Protected Insulation
Reduced installation time
No vacuum required
Leak proof
The communication wire (sku CW-144) is not included
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
MRCOOL DIY 2 Ton VersaPro 2nd Gen Central Ducted Air Handler - R454B
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
No-Vac Precharged Refrigerant Line Set with 3/8" and 3/4" Line Ends - 15 Feet - R454B
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
No-Vac Precharged Refrigerant Line Set with 3/8" and 3/4" Line Ends - 25 Feet - R454B
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
No-Vac Precharged Refrigerant Line Set with 3/8" and 3/4" Line Ends - 35 Feet - R454B
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
No-Vac Precharged Refrigerant Line Set with 3/8" and 3/4" Line Ends - 50 Feet - R454B
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
5 Kilowatt Electric Heat Kit for MRCOOL Central Ducted Hyper Heat Air Handlers
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
8 Kilowatt Electric Heat Kit for MRCOOL Central Ducted Hyper Heat Air Handlers
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
10 Kilowatt Electric Heat Kit for MRCOOL Central Ducted Hyper Heat Air Handlers
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
Santa Fe Ultra70 Whole-Home Ventilating Dehumidifier, 70-pint | R454B
Feature
Spec
SKU
UL3684
Weight (in lbs)
55
Size
70 Pints
Brand/Manufacturer
Santa Fe
UPC
810017961634
Included Items
Leveling feet (4), MERV 13 filter (9” x 11” x 1”), 8” round duct collars (2)
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
Tested lineset at 140 psig, no leaks, pulled vacuum w/ vane pump and held for 1 day. Opened valves on Outdoor Unit and just 1 sec puff, still half vacuum. HVACdirect referred to MrCool tech, saying they just drop-ship them. After multiple e-mails, MrCool agreed shipped dry and would send replacement, then went dark for 2 weeks not replying to e-mails, so pushing back to HVACdirect. Reddit HVAC forum comments that many have been receiving units from several brands (all Medea or Gree factory?) that came w/ no R-454B, apparently since a shortage. Check yours with a gage as soon as received and return if not charged.
Review byRocketTester
Posted on
Very efficient user friendly system
Quality
100%
Service
100%
Price
100%
I could not believe how low my electric bill with using this system for the initial month. Remote is easily usuable. Great brochures included with Mr. Cool
What plenum size to connect to coil for upflow configuration.
For the MVP-24-HP-C-230A00-O coil paired with the MVP-24-HP-MUAH-230A00-O air handler in an upflow configuration, the supply plenum should connect to the unit's factory supply opening, which is approximately 15-5/8 inches wide by 10-1/4 inches deep. In practice, installers typically use a 16-inch by 10-inch plenum connection or a transition that starts at that size and expands to a larger plenum as required by the duct system's airflow and static pressure design.
If you have any further questions, please call us and we will be happy to assist you.
Did you find what you were looking for?
WE'RE OPEN — CALL FOR HELP & SAVINGS!
Get expert help now + extra price discounts available
