Reviews for Trane 3 Ton 15.2 SEER2 96% 100,000 BTU Furnace & AC System - R410A Downflow - RunTru by Trane

I bought a house that had a furnace already installed with the a/c evaporator also present, but no line set or condenser. The quotes to have someone else do the work were crazy, so I decided to figure out how to do it myself. The research took quite a while, I had to buy the tools that were needed, and I had to rent a nitrogen tank, but the result has been excellent. The a/c system has run well now for 2 years. The cost to run the a/c has been low because of the efficiency of this unit. This condenser is very quiet. I wouldn't hesitate to place it next to a bedroom.

Quick delivery after order. Boxed up well but some of the exchanger fins were bent inside assuming from the factory as the box was good and no loose parts inside. Was able to straighten with a comb wasn't a big deal. Installation went good as well as star

I was a bit skeptical to buy a furnace online and have it delivered due to potential shipping damage concerns. I ordered the A951X080BU4SA on Friday morning and received it Tuesday afternoon, strapped to pallet, in perfect undamaged condition. Wow, that was fast! HVAC Direct also has a good protocol, that I followed, for inspecting and noting condition of delivered equipment before delivery driver leaves (very happy with SAIA company & driver BTW). Jeff from HVAC was awesome to work with me and answer my questions both technical and non. Price is great and I will be buying from them again!

WE GOT THE PRODUCT ON TIME,AND A FEW MONTHS LATER, IT IS WORKING GREAT.

Trane a good Brand and this RT is a good Price for the Equipment installed in this series

I installed this unit when my 25 year old Tempstar furnace failed.
This furnace is much lighter construction but it's doing a great job.
If this one lasts 25 years it will outlast me. Time will tell.

Nice unit, compatible with many variations. Only complaint, it is somewhat louder than our older furnace.

The RunTru V9562A, specifically the 2stage 80k BTU, is really a solid furnace, FYI, I am only using it for a furnace, summer isn't hot enough for anything else. It has the Trane brand behind it, and it shows. I replaced a Lennox(80k btu 80%) that came with our new house, it was so old im not sure how it was still running, but once I got this installed, and calibrated(key with two stages), it's a powerhouse. The only time it's ever hit 100% was when I was setting the 2nd stage w.c.
It keeps up nicely and the instructions are clear and to the point. The blower is loud though, as I would imagine this wouldn't be a issue in a basement set up, however I live on a slab,so little to no return ductwork(yet). Overall, this is a great furnace, and if you use a nest, you can see it keeps up nicely. Since I installed it, the average is between the teens, dipping to single or negatives at night, but it stays right on temp. It only need to run 4(maybe 5) an hour for roughly 6-8 minutes, then it hits the temp and the enhanced blower option slows the fan down gradually to help cool it down, which helps ease out of operation mode.

glad we bought it. works like a champ.

The price was perfect and everything arrived quickly and undamaged

It was great to find a replacement outside unit for below half what the hvac companies wanted. It took a little bit to find a tech that would install it. I know HVAC direct does a lot through their prices but I wonder if they could create a list of techs that would install it. I’ll definitely get my future parts from here and recommend them to friends

Got it fast and great quality