Reviews for Goodman 5 Ton 13.4 SEER2 Air Conditioner with Mobile Home Coil w/ TXV - R32

The Around The Clock (ATC) installment team was terrific. The furnace and air conditioner appear to be well made and very functional.

Great dealer

Very happy we have this equipment. Thank you , highly recommend it.

Happy with the purchase. Its quite and running smooth. Hope it will last long.

Good so far,.Can't judge the air con, hasn't been hot enough yet,..🤷‍♂️

Paired with the MrCool UHP18036-O and UAH18036-O HA/HB wiring. Our last Heat pump was Single stage Goodman, with an very basic Digital thermostat. This thermostat and the heat pump do a good job making the house more comfortable. The thermostat has required some tinkering with the service menu. I've changed the following: Follow Me On, Fan Auto, Constant Fan Off. I also changed the Temp Comp - Cool to 2, as I think that starts the ramp down sooner as it approaches the set point. I also don't have auto heat/cool and just manually do the switch from heating to cooling. I've also set enhanced defrosting on to combat the recent ice storm(I do have it 4-6" risers).. The weird part is the thermostat sometimes overshoots the set point(based on its own readings). It is mostly limited to about a degree. I'm learning to just not watch it, as the house feels better as a whole. Only about a month and a half of ownership, so far. The Thermostat is rather basic and overpriced, but it still is the best option for a communicating setup, that I've found. I hope, in the end, that using an HA/HB setup with this thermostat will improve comfort and energy savings but it will take a lot longer to figure that out, with my sample size of 1.

Im using the ACQI Smart thermostat on a MR. Cool Universal Heat Pump, because MR Cool does not offer a WIFI HA/HB Communicating thermostat. All these units are the same, a Madeia with their brand logo on them. Thermostat works just fine, easy to install and setup. Temperature reading is accurate and connects to WIFI Just fine. It only allows one connection at a time via WIFI. There are some service parameters to adjust, but I cant find anyone in ACQI engineering that understands the settings, which would help optimize the system. As stated, it works just fine. There is some much performance information available with these heat pumps. It’s a shame someone is not providing a thermostat that would offer that.

Ordered furnace, ac coil, and condenser to match. Upon arrival all three items we're damaged, I refused shipment and took pictures. I contacted HVAC direct immediately and informed them of the situation. They sent out new equipment without any delay and the new shipment arrived quicker than the first. Second time around all HVAC equipment is in great condition. I have not finished installing yet, but I am impressed with the speed in which HVAC direct solved my shipping damage. I will be ordering more in the future because of their willingness to make a bad situation good!

I had previously used a Nest thermostat to control my variable speed inverter heat pump, but that only controls it by 24v connections which lack optimized control of fan and compressor. Switched to this new thermostat to have full control via its communication connection. The problem is I gained some features but lost others. Example features I don’t have with those new ACIQ thermostat is settings to control the temperature at which the aux heat turns on, the ability to run aux heat and heat pump at the same time, set points for my dehumidifier , as well as a good scheduling system. It’s very barebones compared to a nest or Ecobee thermostat , but it’s required to use the communication interface for varying the output of the fan and heating.

Purchased to use with a Senville ducted heat pump. Works just fine, seems to support all the features of the Senville. Only issue is that the app almost always disconnects from the thermostat. It is 3 extra clicks to reconnect, and so far that has always worked. Same issue android and apple. Using with the HA/HB terminals. Hope they resolve the app issue, asni will need another one here in a few months.