3 Ton AmeriCool 37,000 BTU Portable Air Conditioner 208/230V - Scratch & Dent – Minimal Damage

High Capacity 3 Ton Portable Air Conditioner with 37,000 BTU/h Cooling Capacity for Commercial and Industrial Applications – AmeriCool WPC-9000PR

The AmeriCool WPC-9000PR (PAC0007) is a high-capacity portable air conditioner designed to provide targeted cooling and supplemental temperature control for commercial, industrial, and temporary cooling applications. With a nominal cooling capacity of 37,000 BTU/h, dedicated spot-cooling and room-cooling settings, and flexible air ducting options, this self-contained cooling system provides portable temperature control without requiring a permanent HVAC installation. Its wheeled construction allows the unit to be repositioned as cooling requirements change, making it suitable for equipment rooms, manufacturing environments, multi-workstation areas, and other applications requiring supplemental cooling.

Key Benefits

• 37,000 BTU/h Cooling Performance – Provides high-capacity supplemental cooling for commercial workspaces, equipment areas, and industrial environments.
• Spot and Room Cooling Settings – Allows users to select targeted cooling or room-temperature control according to application requirements.
• Portable Construction – Supports relocation between work areas as cooling requirements change.
• Flexible Air Distribution – Supports three 5-inch cold-air nozzles for directing cooled air toward selected work areas.
• Ducted Exhaust Configuration – Uses a 16-inch hot-air exhaust connection to route warm condenser air away from the conditioned space.
• Condensate Collection – Uses a condensate tank to collect moisture removed from the air during cooling operation.
• 208/230V Electrical Connection – Operates on a single-phase, 60Hz power supply with a NEMA 6-30P plug.
• Automatic Restart – Automatically restarts following a power interruption, helping restore cooling when power returns.

High-Capacity Cooling Performance

The AmeriCool WPC-9000PR provides a nominal cooling capacity of 37,000 BTU/h, equivalent to approximately 3.1 tons of refrigeration. The manufacturer specifies a 208/230V, single-phase, 60Hz electrical supply and an operating ambient temperature range of 64°F to 113°F. The unit uses R32 refrigerant and is designed for demanding commercial and industrial environments requiring supplemental temperature control. Its cooling capacity makes it suitable for localized cooling loads where a portable system is preferred over a permanent central HVAC installation.

Spot Cooling and Targeted Temperature Control

The AmeriCool WPC-9000PR features dedicated spot-cooling and room-cooling settings to accommodate different cooling requirements. Spot cooling directs conditioned air toward specific equipment, employees, or workstations, while room cooling supports temperature control within an enclosed space. Three included 5-inch cold-air nozzles allow cooled air to be directed toward selected locations. This configuration is particularly useful in environments where cooling an entire facility is impractical or where additional cooling is needed near heat-generating equipment. When operating in an enclosed room, warm condenser air must be exhausted outside the conditioned space to prevent heat buildup and maintain effective cooling performance.

Airflow and Distribution

The AmeriCool WPC-9000PR provides evaporator airflow rates of 882 CFM on high speed and 776 CFM on low speed. Condenser airflow is rated at 1,660 CFM. Three included 5-inch cold-air nozzles support targeted air delivery, while an optional 5-inch by 20-inch cool-air duct assembly is available for compatible configurations. The unit has a 16-inch hot-air exhaust duct connection. AmeriCool's published product information lists a maximum hot-air exhaust duct length of 60 feet for the WPC-9000 model. Confirm the allowable duct length for the specific unit revision and installation before selecting an exhaust configuration. Following the manufacturer's duct sizing and routing requirements helps maintain appropriate airflow and cooling performance.

Portable Design and Flexible Installation

The self-contained AmeriCool WPC-9000PR can be positioned wherever supplemental cooling is required without the need for a permanent central HVAC installation. The unit measures approximately 26 inches wide, 33.3 inches deep, and 52.4 inches high, with a net weight of approximately 254 pounds. Its portable construction supports relocation between suitable work areas. A 16-inch hot-air exhaust duct connection allows warm condenser air to be routed outside the conditioned area. Maintain adequate clearance around the air intake and filters, and provide appropriate access for ducting, electrical connections, operation, and maintenance. Because of its weight, the unit should be moved using appropriate handling procedures and equipment.

Condensate Management

The AmeriCool WPC-9000PR uses a condensate collection tank to collect moisture removed from the air during cooling operation. AmeriCool's published specifications for the WPC-9000 identify a bucket-style drainage system with a capacity of approximately 4 gallons. Condensate production varies according to ambient temperature, relative humidity, and operating conditions, so the tank should be monitored and emptied in accordance with the manufacturer's instructions. AmeriCool also lists condensate management accessories for compatible portable air-conditioning units. Verify the correct accessory configuration and installation requirements before selecting an optional condensate removal system.

Controls, Comfort and Electrical Connection

The AmeriCool WPC-9000PR supports spot-cooling and room-cooling settings and provides high- and low-speed evaporator airflow. Its automatic restart function allows the unit to resume operation after power returns following an interruption. The unit requires a 208/230V, 60Hz, single-phase electrical supply and uses a NEMA 6-30P plug. The manufacturer's published specifications list a 30-amp fuse size and a full-load current of approximately 20 amps. Confirm the required circuit protection, receptacle configuration, grounding, and electrical supply against the owner’s manual for the specific unit revision and applicable electrical codes before operating the unit.

Commercial and Industrial Applications

The AmeriCool WPC-9000PR is designed for commercial and industrial environments requiring portable, high-capacity cooling, including computer rooms, server rooms, hospitals, manufacturing facilities, process-cooling applications, multi-workstation areas, special events, and emergency or short-term cooling requirements. Its 37,000 BTU/h cooling capacity and three cold-air nozzles support applications with substantial localized cooling loads. The combination of spot-cooling and room-cooling settings provides flexibility for different operating environments, while its portable design allows supplemental cooling to be deployed as operational requirements change.

Mobility and Deployment

The AmeriCool WPC-9000PR features a portable construction designed to support relocation between work areas. Its wheeled base allows the unit to be moved and positioned according to changing cooling demands. At approximately 254 pounds, the unit should be moved using appropriate handling procedures and equipment. Position the unit on a suitable level surface and ensure that the exhaust duct, electrical connection, and air intake clearances are correctly arranged before operation. The portable design supports temporary cooling applications and facilities where cooling requirements change over time.

Service and Maintenance

The AmeriCool WPC-9000PR supports routine maintenance through serviceable air filtration components and accessible operating connections. AmeriCool identifies a vinyl chloride evaporator filter and an aluminum condenser filter as available options for the WPC-9000PR. Regularly inspect and clean the filters in accordance with the manufacturer's instructions to help maintain airflow and cooling performance. Check the condensate tank regularly, keep the air intake and discharge paths unobstructed, and inspect the exhaust duct for secure connections. Before cleaning or servicing the unit, switch it off and disconnect the electrical supply. Follow the manufacturer's maintenance schedule and troubleshooting guidance to support reliable operation.

Warranty

AmeriCool's published product catalog specifies a one-year parts-and-labor warranty for the complete unit and three years of parts-and-labor coverage for the compressor. Warranty coverage is subject to the manufacturer's applicable terms, conditions, and exclusions. Refer to the warranty documentation supplied with the specific WPC-9000PR unit to confirm coverage requirements, exclusions, and service procedures.

Recommended Accessories

• 5-Inch x 20-Inch Cool-Air Duct Assembly – An optional accessory for directing cooled air toward selected work areas; verify the required quantity and configuration.
• Vinyl Chloride Evaporator Filter – A manufacturer-listed replacement filter for evaporator air filtration and routine maintenance.
• Aluminum Condenser Filter – A manufacturer-listed replacement filter for condenser air filtration and maintenance.
• Condensate Tank – A manufacturer-listed condensate collection component; confirm the correct replacement part for the WPC-9000PR.
• 16-Inch Exhaust Duct Flange – An optional accessory for connecting the hot-air exhaust duct to the unit.
• 16-Inch Flexible Exhaust Duct – Routes warm condenser air outside the conditioned space; follow the manufacturer's specified duct diameter and allowable length.
• Condensate Pump Kit – An optional accessory for automatic condensate removal where compatible with the unit and installation requirements.
• Remote Display Accessory – An optional accessory for controlling compatible units from a remote location; verify compatibility and the applicable part number before ordering.
• Remote Temperature Sensor – An optional accessory for compatible systems requiring remote temperature sensing; confirm the correct sensor and connection configuration.

High-Capacity Portable Cooling with the AmeriCool WPC-9000PR

Experience flexible, targeted cooling with the AmeriCool WPC-9000PR portable air conditioner. Combining 37,000 BTU/h of cooling capacity with spot-cooling and room-cooling settings, three 5-inch cold-air nozzles, and flexible exhaust ducting, this portable air-conditioning system provides supplemental temperature control for commercial facilities, industrial workspaces, equipment rooms, multi-workstation environments, and temporary cooling applications.

No Return Policy

All AmeriCool commercial unit sales are final and are non-refundable.

No Return Policy

All AmeriCool commercial unit sales are final and are non-refundable.

Please Note: This unit does not currently have any remote control options available