27,000 BTU 22 SEER ACiQ IntelliHeat 2-Zone Floor Mounted Mini Split System - 12+12

OVERVIEW

ACiQ is the smart solution to adaptive heating and cooling in almost any space and climate -all at an affordable cost. With the ACiQ-36Z-HH-M4, you can have up to 3 air handlers run off a single condenser, saving space outside and keeping you perfectly comfortable in your home.

QUICK FACTS

• 27,000 BTU, 22 SEER multi zone heat pump condenser
• Designed to function with up to 3 attached air handlers
• Efficient cooling from -22°F to 122°F outdoor temperatures
• Efficient heating from -22°F to 57°F outdoor temperatures
• Integrated IntelliHeat technology with base pan heater
• Gold Fin full-protection coating on condenser coil
• Quiet operation at even the highest workloads

27,000 BTU, 22 SEER

The 27,000 BTU, ACIQ-27Z-HH-M3B is designed to easily support up to 3 air handlers at up to 1.25 times the condenser BTU rating, or 33,750 BTU across all air handlers. This adaptive, inverter condenser is constantly self-adjusting to provide the precise amount of heating or cooling needed to maintain your desired temperature in each room or zone. You can set different temperatures room by room, even turn off heating and cooling in unused areas. This, combined with a high efficiency rating of 21.5 SEER, means you are buying a system designed to intelligently save you money both up front and over the lifetime of the unit.

IntelliHeat Base pan Heater Technology

The ACiQ-36Z-HH-M4 has integrated IntelliHeat technology to maximize heat performance in extreme cold weather. IntelliHeat is two technologies working together: Extended heat pump performance (hyper heat) and base pan heater technology. The extended heat pump performance harnesses the power of inverter condenser by using outdoor temp sensing, variable refrigerant flow and variable condenser fan speed to maximize heat extraction all the way down to -22. In addition, every ACIQ multizone condenser includes a base pan heater to keep ice from collecting on the condenser coil during heat pump operation. This ensures your unit spends more time providing heat for your family and less time in defrost mode. It also protects the coil from damaging freezing, allowing you to enjoy your investment for the long haul. The best news of all? ACIQ includes these technologies with every multizone condenser – the competition makes you pay for it.

ACiQ condenser coils are covered in a durable Gold Fin protective coating, providing enhanced resistance to corrosion even in harsh climates. Paired with the protection of the integrated base pan heater, your system will run consistently year after year, giving you peace of mind in every season.

ACiQ multi zone condensers are pre-charged with enough R410-A refrigerant for up to 98' of line set across all air handlers connected to the condenser. Your technician may not need to add any refrigerant or will add just enough to make up the additional length. All units are run-tested at the factory before shipping. The system is designed to be reliable and give years of trouble-free performance. Should your unit need servicing, troubleshooting is easy thanks to the unit's self-diagnosing control board with alerts that are sent to each connected air handler.

Although the condenser is pre-charged, please note that this model of equipment does not have quick connect line set connectors and is not a self-install unit. You will need a professional to add more refrigerant and vacuum the lines as needed. Installation materials such as line sets, control wire, drain hose, whip and disconnect are not included, but are available at additional cost in the Accessories section to the right of this text. For all multi zone ACiQ condensers, a minimum of two air handlers is needed for the unit to function.

The warranty on the ACIQ-27Z-HH-M3B is a 5 year parts and 7 year limited compressor warranty. With online registration and an installation following your state and local installation codes, the limited compressor warranty will increase to 12 years, giving you the peace of mind that you need to make sure your ACiQ system stays intelligent throughout its long life.

ACiQ Floor Mounted air handlers are ideal for sun porches and attic rooms where space to mount a standard high wall unit is not available. Sometimes called a ‘heat console’ type air handler, these units surface mount low on the wall, near or on the floor. The shape is wider, taller and slightly shallower than the high wall unit. These are ideal for sun porches where the only wall space is below windows, or attic remodels with knee-walls, where vertical high walls may not be available.

Optimized for Heat

Like a high wall mount, these units take in return air at the top edge and deliver it at the bottom.  This is ideal for heating.  By delivering warm air at floor level, stratification due to heat rise is eliminated.  When you put the unit into cooling mode, the airflow direction is reversed for better air mixing in the room. 

FEATURES

• btu of Heating or Cooling
• Dry and Fan modes also available
• Good for a small room in most climates
• Remote control thermostat included

Note: The 18k and 24k are slightly different in appearance from the 12k, and can be surface mounted on the floor or ceiling. Please see the appropriate manual for your model.