0% Financing for 12 Months* or up to 48 Months* Terms Available - Buy Now and Pay later!

ADP 4" Horizontal Vent Kit - Category 3

Required Fields *

In Stock - Ready to Ship
By

ADP

In stock

Model

ADP-4IN-CAT3-HORIZ-KIT

ID

188977

Was $440.01
Your Low Price $286.91
Customize ADP 4" Horizontal Vent Kit - Category 3
Z-Flex 4” ADP Appliance Adapter
Z-Flex 4” ADP Appliance Adapter   + $52.40
4 Inch Z-Flex Horizontal Termination Tee
4 Inch Z-Flex Horizontal Termination Tee   + $80.91
4" Z-Flex Adjustable Wall Thimble
4" Z-Flex Adjustable Wall Thimble   + $49.53
4" x 1 Ft. Z-Flex Single Wall Pipe
4" x 1 Ft. Z-Flex Single Wall Pipe   + $36.75
4" x 2 Ft. Z-Flex Single Wall Pipe
4" x 2 Ft. Z-Flex Single Wall Pipe   + $67.32
ADP 4" Horizontal Vent Kit - Category 3

$286.91

ADP Unit Heater Horizontal Vent Kit, designed to provide safe and efficient exhaust ventilation for ADP unit heaters.

Z-Flex 4” ADP Appliance Adapter

The Z-Flex 4" Appliance Adapter SVALUH4 is a high-quality venting component designed to connect your appliance to the venting system securely. This adapter is made from durable AL29-4C stainless steel, suitable for both positive and negative pressure applications. It is UL tested and listed to UL1738/S636, ensuring it meets the highest safety standards for CAT II, III, and IV venting. The Model SVALUH4 is ideal for use with a variety of appliances, providing a reliable and efficient connection. Trust Z-Flex for superior quality and performance in your venting solutions.

4 Inch Z-Flex Horizontal Termination Tee

The Z-Vent 2svsttf04 is a 4-inch horizontal termination tee fitting made from stainless steel. This termination tee can be used as either an intake or an exhaust piece. It has a bird screen to keep animals out of your exhaust system.

  • Material: Stainless steel
  • Size: 4 inches
  • Tee openings can be positioned up and down or left to right.
4" Z-Flex Adjustable Wall Thimble4" Z-Vent Adjustable Wall Thimble suitable for positive and negative pressure. This thimble is adjustable from 4" to 7" and has dimensions of 10"x10"
4" x 1 Ft. Z-Flex Single Wall Pipe
This Z-Vent Single Wall Pipe has a silicon gasket and integral gear clamp on the female end, the male end can be cut to size with a hacksaw.
4" x 2 Ft. Z-Flex Single Wall Pipe
This Z-Vent Single Wall Pipe has a silicon gasket and an integral gear clamp on the female end, the male end can be cut to size with a hacksaw.
  • Air tight seam
  • Gasketed connections
  • No sealant required
  • High pressure rating
More Information
Z-Flex 4” ADP Appliance Adapter
FeatureSpec
SKU2SVALUH4
Weight (in lbs)5
Brand/ManufacturerZ-Flex
Diameter4 Inches
Warranty15 years
Resources

You will need Adobe® Acrobat® Reader to view PDF documents.

Safety InformationPROPOSITION 65 WARNING
4 Inch Z-Flex Horizontal Termination Tee
FeatureSpec
SKU2svsttf04
Weight (in lbs)5
Brand/ManufacturerZ-Flex
UPCna
Height6"
Width4"
Depth6"
Safety InformationPROPOSITION 65 WARNING
4" Z-Flex Adjustable Wall Thimble
FeatureSpec
SKU2SVWT04
Weight (in lbs)5
Brand/ManufacturerZ-Flex
Replaces2SVSWTF04
UPCna
Duct Diameter4", 5", 6", 7"
Height10"
Width10"
Depth4"
Safety InformationPROPOSITION 65 WARNING
4" x 1 Ft. Z-Flex Single Wall Pipe
FeatureSpec
SKU2SVEPWCF0401
Weight (in lbs)2
Brand/ManufacturerZ-Flex
UPCna
Diameter4 Inches
Height12
Width4
Safety InformationPROPOSITION 65 WARNING
4" x 2 Ft. Z-Flex Single Wall Pipe
FeatureSpec
SKU2SVEPWCF0402
Weight (in lbs)5
Brand/ManufacturerZ-Flex
UPCna
Diameter4 Inches
Length2'
Height4"
Width4"
Depth24"
Safety InformationPROPOSITION 65 WARNING
Write Your Own Review
You're reviewing:ADP 4" Horizontal Vent Kit - Category 3
Your Rating
Customer Questions
No Questions
Did you find what you were looking for?
blockboard tech