AirRex 5 Ton 61,000 BTU Water-Cooled, Dual Output Portable Air Conditioner | 220V - R454B

Efficient 5 Ton 61,000 BTU Water-Cooled Portable Air Conditioner for Commercial and Industrial Environments with High-Capacity Cooling and No Hot-Air Exhaust Duct Required

The Airrex HWC-60R is a 61,000 BTU/h (approximately 5.1-ton) water-cooled portable air conditioner and spot cooler designed to provide high-capacity cooling for commercial facilities, manufacturing environments, production areas, hospitals, kitchens, and other demanding applications. Combining water-cooled refrigeration technology with dual cold-air discharge outlets, digital controls, and a self-contained portable cabinet, this cooling system provides targeted temperature control without requiring a conventional hot-air exhaust duct. The HWC-60R uses R-454B refrigerant and incorporates a condenser-water regulating valve, an automatic condensate pump, and removable, washable air filters to support practical operation and maintenance. Its high cooling capacity and water-cooled heat-rejection design make it suitable for larger work areas where conventional air-cooled portable units may be difficult to install.

Key Benefits

• 61,000 BTU/h Cooling Performance – Provides approximately 5 tons of cooling capacity for supplemental temperature control in large commercial and industrial environments.
• Water-Cooled Heat Rejection – Uses a continuous condenser-water supply to remove heat, eliminating the need for a conventional hot-air exhaust duct.
• Dual Spot Cooling Outlets – Two 5-inch cold-air discharge nozzles allow conditioned air to be directed toward employees, machinery, equipment, and designated work areas.
• High-Capacity Airflow – Delivers approximately 2,000 CFM of indoor airflow to support substantial cooling distribution and targeted temperature control.
• Portable Deployment – Four 4-inch swivel casters, including two locking casters, support movement and positioning within suitable facilities.
• Automatic Condensate Management – An included automatic condensate pump removes moisture collected during cooling and dehumidification operation.
• Digital Controls and Compressor Protection – Electronic operating controls, timer functionality, pressure safety switches, and compressor protection support convenient operation.
• Service-Friendly Filtration – Removable, washable aluminum and stainless-steel mesh air filters simplify routine maintenance and help maintain airflow.

61,000 BTU Cooling Performance and Water-Cooled Refrigeration

The Airrex HWC-60R provides a rated cooling capacity of 61,000 BTU/h under the manufacturer's specified rating conditions of 95°F dry-bulb temperature and 40% relative humidity. Its water-cooled refrigeration system uses R-454B refrigerant to provide high-capacity supplemental cooling for commercial and industrial facilities. Instead of relying on a conventional air-cooled condenser that discharges hot air through an exhaust duct, the HWC-60R transfers condenser heat to a water circuit. This configuration is particularly useful in enclosed facilities and locations where outdoor exhaust duct routing is impractical. The published cooling operating range is approximately 65°F to 104°F, subject to the manufacturer's specified operating conditions. Actual performance depends on ambient conditions, condenser-water availability, internal heat loads, and the installation environment.

Water-Cooled Operation and Targeted Temperature Control

The Airrex HWC-60R is designed to deliver concentrated cooling directly to employees, machinery, production areas, and other locations requiring supplemental temperature control. Two 5-inch cold-air discharge outlets allow conditioned air to be directed toward designated cooling zones. Its water-cooled condenser uses a regulated water supply to remove refrigeration-system heat, eliminating the need for a conventional hot-air exhaust duct. This arrangement supports installation in facilities where exhausting warm condenser air into the surrounding space would be undesirable. The unit requires appropriate condenser-water supply and return connections, with water flow and connection requirements verified against the manufacturer's installation documentation. The directional cold-air outlets provide flexibility for targeted cooling without requiring a permanent HVAC installation.

Airflow and Distribution

The Airrex HWC-60R provides approximately 2,000 CFM of indoor airflow through a centrifugal fan system. Two 5-inch cold-air discharge connections allow conditioned air to be directed toward employees, machinery, equipment, and designated work areas. The unit is designed to support ducted cold-air distribution, with a published maximum equivalent duct length of approximately 50 feet, subject to the manufacturer's ducting limitations and allowable external static pressure. Its water-cooled condenser design eliminates the need for conventional hot-air exhaust ducting. Keeping the air inlets, filters, and discharge outlets unobstructed is important for maintaining airflow and cooling performance.

Portable Design and Flexible Installation

The self-contained cabinet allows the Airrex HWC-60R to be positioned where high-capacity supplemental cooling is needed without requiring a permanent HVAC installation. The published cabinet dimensions are approximately 29 inches wide, 30 inches deep, and 57 inches high, with a net weight of approximately 441 pounds. Four 4-inch swivel casters, including two locking casters, support movement and secure positioning on suitable level surfaces. The unit requires a 220V, single-phase, 60 Hz electrical supply. The manufacturer lists a 30-amp circuit breaker size for the HWC-60R. Because the unit uses water-cooled heat rejection, installation requires suitable condenser-water supply and return connections rather than a conventional hot-air exhaust duct. Adequate clearance, appropriate floor load capacity, access to the water connections, and electrical compatibility must be verified before installation.

Condensate Management

The Airrex HWC-60R includes an automatic condensate pump to remove moisture generated during cooling and dehumidification operation. The pump supports condensate disposal without relying solely on manual collection and emptying. Condensate removal is separate from the condenser-water circuit used for heat rejection. The condensate discharge must be routed to a suitable drainage point in accordance with the manufacturer's instructions. Drainage hoses and connections should be inspected periodically for kinks, blockages, and leaks to help maintain reliable operation. Proper condensate management is particularly important during extended operation in humid environments.

Controls, Comfort, and Electrical Connection

The Airrex HWC-60R features digital operating controls for convenient adjustment of cooling functions and operating settings. The unit supports cooling, fan, and dehumidification operation, with high-capacity indoor airflow for commercial and industrial applications. Built-in safety devices include high- and low-pressure switches, a compressor delay timer, a thermostat protector for the compressor, fan motor protection, and automatic full-tank shutoff. The manufacturer specifies a 220V, single-phase, 60 Hz electrical supply, rated cooling power consumption of approximately 4.4 kW, and current consumption of approximately 20 amps. The published circuit breaker size is 30 amps. The HWC-60R's power connection must be confirmed against the exact unit nameplate and current manufacturer's electrical documentation before installation; a compatible plug and receptacle must not be assumed from the smaller HWC-series models. Electrical installation must comply with applicable local codes and manufacturer requirements.

Commercial and Industrial Applications

The Airrex HWC-60R is designed for high-capacity cooling in commercial and industrial environments, including hospitals, kitchens, production facilities, and office complexes. Its 61,000 BTU/h cooling capacity makes it suitable for large work areas and applications requiring substantial supplemental temperature control. The water-cooled condenser is particularly useful in enclosed facilities where conventional hot-air exhaust ducting is impractical or where heat discharge into the surrounding space must be avoided. Two directional cold-air outlets support targeted cooling for equipment, employees, and work areas. Successful operation requires a suitable condenser-water system, appropriate electrical service, and adequate clearance for air circulation and maintenance.

Mobility and Deployment

The Airrex HWC-60R combines a heavy-duty cabinet with four 4-inch swivel casters, including two locking casters, to support positioning within suitable commercial and industrial facilities. Its self-contained refrigeration system and dual cold-air outlets allow the unit to be deployed where supplemental cooling is required. Once positioned, the locking casters help secure the cabinet during operation. With a net weight of approximately 441 pounds, movement requires suitable floor conditions and appropriate handling equipment or procedures. Before deployment, verify the floor load capacity, access route, condenser-water connections, electrical supply, and space needed for maintenance.

Service and Maintenance

The Airrex HWC-60R features removable, washable aluminum and stainless-steel mesh air filters to simplify routine maintenance. Filters should be inspected and cleaned regularly according to the operating environment and dust loading. Air inlets, discharge outlets, and duct connections should remain unobstructed to maintain proper airflow. The condenser-water supply and return connections, water-regulating valve, and automatic condensate pump should be inspected according to the manufacturer's maintenance instructions. Built-in compressor protection, high- and low-pressure switches, a compressor delay timer, fan motor protection, and automatic full-tank shutoff provide additional operating safeguards. Disconnect the electrical supply and follow the manufacturer's instructions before cleaning or servicing the equipment.

Warranty

The Airrex HWC-60R is offered with a manufacturer's limited warranty. Published product information lists one year of general warranty coverage and three years of compressor coverage; however, the exact parts, labor, compressor coverage, eligibility requirements, and exclusions must be confirmed against the current written warranty supplied with the unit. Proof of purchase and compliance with the applicable installation, operating, and maintenance requirements may be required for warranty service. Confirm warranty terms with Airrex USA or an authorized distributor before purchase.

Recommended Accessories

• Condenser-Water Hose Kit – Compatible water hoses and connection fittings for the HWC-60R condenser-water supply and return. The Airrex product catalog lists hose-kit accessories for the HWC-19R and HWC-60R, including 25-foot and 40-foot options; confirm the required kit and connection compatibility before ordering.
• Flexible Cold-Air Duct – The Airrex product catalog lists an 8-inch-diameter, 1.6-foot twist-and-lock flexible duct, part number GAC69043, for the HSC-36R, HSC-60R, and HWC-60R series. Confirm the intended connection and required accessories for the installation.
• Louver Grill Kit – Compatible louver grill accessory listed for the HSC-36R, HSC-60R, and HWC-60R series; confirm the correct configuration with the manufacturer or authorized distributor.
• Duct Nozzle Kit – Compatible duct nozzle accessory listed for the HSC-36R, HSC-60R, and HWC-60R series; verify connection dimensions and application before ordering.
• Condensate Drain Accessories – Compatible drain tubing and fittings for routing condensate-pump discharge to an appropriate drain; confirm the required dimensions and installation limitations.

High-Capacity Water-Cooled Spot Cooling with the Airrex HWC-60R

Experience high-capacity supplemental cooling with the Airrex HWC-60R water-cooled portable air conditioner and spot cooler. Combining 61,000 BTU/h of cooling capacity with water-cooled heat rejection, dual 5-inch cold-air discharge outlets, digital controls, and an automatic condensate pump, this approximately 5.1-ton portable cooling system provides flexible temperature control for production facilities, hospitals, kitchens, office complexes, and other demanding commercial environments. Its water-cooled design eliminates the need for a conventional hot-air exhaust duct, making it a practical solution for installations where traditional air-cooled portable air conditioners are difficult to deploy.

No Return Policy

All AirRex commercial unit sales are final and are non-refundable.