Daikin 5 Ton 14.3 SEER2 Air Conditioner and Multi-Positional Air Handler System | 460V 3 Phase - R32 - Single Stage

Reliable 5-Ton Commercial Cooling with a Daikin Split System Air Conditioner for Light Commercial Applications

The Daikin DC3SEA6040 / AMST60DU1300 is a nominal 5-ton split air conditioner system designed to provide ducted cooling for suitable light commercial and other compatible applications. Combining the DC3SEA6040 outdoor condensing unit, rated at 60,000 BTU/h nominal cooling capacity, with the AMST60DU1300 multi-position air handler, this system features single-stage scroll compressor technology, a multi-speed electronically commutated motor (ECM) blower, and R-32 refrigerant technology. The outdoor unit operates on 460V electrical service, making it suitable for compatible commercial electrical installations. The indoor air handler offers flexible installation configurations, adjustable airflow, and service-friendly features to support reliable system operation.

Key Benefits

• 5-Ton Nominal Cooling Capacity – Provides 60,000 BTU/h of nominal outdoor cooling capacity for appropriately sized ducted applications.
• Single-Stage Scroll Compressor – Uses established scroll compressor technology to support dependable cooling operation during warm-weather conditions.
• Multi-Speed ECM Blower Motor – Provides airflow adjustment flexibility to accommodate ductwork requirements and system commissioning needs.
• Multi-Position Air Handler – Supports installation configurations suited to different building layouts and available equipment spaces.
• Flexible Split System Installation – Separates the outdoor condensing unit from the indoor air handler to provide flexibility in equipment placement.
• R-32 Refrigerant Technology – Uses R-32 refrigerant in a compatible system configuration designed around the manufacturer's installation and safety requirements.
• 460V Commercial Electrical Supply – Supports installations with compatible 460V electrical service, subject to the equipment nameplate and applicable electrical codes.
• Service-Friendly Components – Includes a factory-installed filter drier, accessible outdoor service valve gauge ports, and tool-less air handler filter access to support routine maintenance.

5-Ton Cooling Capacity for Commercial Comfort

The Daikin DC3SEA6040 / AMST60DU1300 combines a nominal 60,000 BTU/h outdoor air conditioner with an indoor air handler designed for compatible ducted cooling applications. The DC3SEA6040 uses a single-stage scroll compressor and R-32 refrigerant to provide cooling during warm-weather operation. The outdoor unit and AMST60DU1300 air handler are both in the nominal 5-ton capacity range. Actual cooling output depends on the approved indoor and outdoor equipment combination, indoor and outdoor operating conditions, airflow settings, refrigerant charge, and installation quality. Proper equipment sizing and commissioning are essential for achieving the intended cooling performance.

High-Efficiency Scroll Compressor and Cooling Performance

The DC3SEA6040 outdoor condensing unit features a single-stage scroll compressor and advanced Copeland® CoreSense™ Technology. The Daikin DC3SEA series offers nominal cooling capacities from 36,000 to 60,000 BTU/h and published efficiency ratings of up to 14.3 SEER2 and 11.2 EER2, depending on the rated equipment combination. The DC3SEA6040 incorporates a factory-installed filter drier, sweat-connection service valves with accessible gauge ports, a high-pressure switch, an enclosed contactor, and extended-life capacitors. These components support routine refrigeration-system servicing and dependable cooling operation when the equipment is installed and maintained according to manufacturer instructions.

Cooling Efficiency with Single-Stage Operation

The DC3SEA6040 uses single-stage compressor operation. The exact SEER2 and EER2 ratings for the DC3SEA6040 paired with the AMST60DU1300 should be confirmed using the applicable Daikin performance data or AHRI-certified combination. These standardized ratings provide a basis for comparing cooling efficiency under defined test conditions. Actual energy consumption depends on building characteristics, outdoor temperatures, thermostat settings, operating schedules, duct design, airflow, and equipment maintenance. The AMST60DU1300 air handler's multi-speed ECM blower provides flexibility when selecting airflow settings to suit the installed ductwork and system requirements.

Split System Design for Flexible Installation

The split system configuration separates the DC3SEA6040 outdoor condensing unit from the AMST60DU1300 indoor air handler, allowing equipment placement to be adapted to the building layout. The DC3SEA6040 uses a 3/8-inch liquid line and a 1-1/8-inch suction line for the specified refrigerant piping configuration. Its service valve connections are 3/8-inch liquid and 7/8-inch suction, so any required suction-line adapter must be supplied in the field. The outdoor unit is factory charged for 15 feet of 3/8-inch liquid line, and the system charge must be adjusted according to Daikin's installation instructions. The AMST60DU1300 supports multiple installation orientations. Confirm refrigerant piping requirements, allowable line lengths, vertical separation, equipment clearances, and approved system compatibility before installation.

Airflow, Controls & Indoor Comfort

The AMST60DU1300 air handler features a multi-speed ECM blower motor, an all-aluminum evaporator coil with high-performance coated fin stock, and a factory-installed thermal expansion valve for compatible cooling applications. Its airflow settings provide flexibility when configuring the system to suit ductwork and installation requirements. The AMST R-32 air handler series also incorporates a factory-installed refrigerant sensor designed for the lifespan of the coil, along with a rigid SmartFrame™ cabinet, tool-less filter access, and a thermoplastic drain pan with secondary drain connections. Compatible thermostat and control equipment must be selected according to the approved system configuration and manufacturer's instructions. Proper airflow adjustment, refrigerant charging, and thermostat setup help support reliable cooling performance.

Commercial Applications and Installation Flexibility

The Daikin DC3SEA6040 / AMST60DU1300 is intended for suitable ducted cooling applications where the equipment combination, electrical supply, airflow requirements, and rated performance meet project specifications. Potential applications include appropriately sized offices, retail spaces, and other light commercial environments requiring centralized ducted air conditioning. The separate indoor and outdoor components provide flexibility for equipment placement, while the indoor air handler accommodates installation requirements based on the building layout. The DC3SEA6040 requires 460V electrical service. Verify the outdoor unit's phase, frequency, minimum circuit ampacity, and maximum overcurrent protection against the nameplate, and confirm the indoor air handler's electrical requirements separately before installation.

Service & Maintenance Features

The DC3SEA6040 outdoor unit includes a factory-installed filter drier, sweat-connection service valves with accessible gauge ports, an enclosed contactor, a high-pressure switch, and extended-life capacitors. Its coil guard and service access provisions support routine inspection and maintenance. The AMST60DU1300 air handler features tool-less filter access, cabinet insulation designed for secure retention, and a drain pan with secondary drain connections. Routine maintenance should include air filter inspection and replacement as needed, indoor and outdoor coil cleaning, condensate drainage checks, electrical connection inspection, and verification of refrigerant charge and airflow by qualified service personnel. All refrigerant-system servicing must follow Daikin's applicable R-32 installation and safety requirements.

Warranty

The Daikin DC3SEA commercial air conditioner series includes a 5-Year Parts Limited Warranty. Online registration must be completed within 60 days of installation to receive the 5-Year Parts Limited Warranty where registration is required by applicable law. The AMST60DU1300 air handler warranty should be confirmed separately using the applicable Daikin warranty documentation. Coverage, registration requirements, eligibility, limitations, and exclusions vary by product and jurisdiction. Review the current Daikin warranty documents for the DC3SEA6040 and AMST60DU1300 to confirm the applicable coverage for each component.

Recommended Accessories

• Compatible Thermostat or Commercial Control – Select a thermostat compatible with the single-stage cooling system and approved indoor and outdoor equipment combination.
• Outdoor Equipment Pad – Provides a suitable support surface for the outdoor condensing unit where ground-level installation is used.
• Electrical Disconnect – Select an appropriately rated disconnect for the DC3SEA6040 outdoor unit and AMST60DU1300 indoor air handler, based on their respective nameplates and applicable electrical codes.
• Refrigerant Line Set – Select compatible refrigerant piping with the required 3/8-inch liquid and 1-1/8-inch suction line sizes, accounting for the outdoor unit's service valve connections and any required field-supplied adapter.
• Downflow Kit – Daikin DFKE-03, where required for an approved downflow installation of the AMST60DU1300.
• Condensate Management Kit – Daikin CMK0020, where compatible with the installation requirements of the AMST60DU1300.
• High-Humidity Kit – Daikin HHK0007, where applicable to the installed system and operating requirements.
• Electric Heater Kit – Select a compatible Daikin HKTSD-series heater kit if supplemental electric heat is required. Confirm approved kit compatibility, heater capacity, electrical supply, and minimum airflow requirements before selection.
• FRPP Drain Pan Kit for UVC Applications – Daikin UVPK07, where required for a compatible ultraviolet-light installation.

Dependable Commercial Cooling with the Daikin DC3SEA6040 / AMST60DU1300

Experience dependable ducted cooling with the Daikin DC3SEA6040 / AMST60DU1300 split system air conditioner. Combining a nominal 5-ton outdoor condensing unit with a multi-position, multi-speed ECM air handler, this system offers single-stage scroll compressor technology, R-32 refrigerant, flexible installation options, and service-friendly components for compatible light commercial applications. Verify the approved equipment pairing, electrical requirements, and certified system performance ratings to ensure the selected configuration meets the project's cooling and installation requirements.