Customer Reviews
0% Financing for 24 Months* Available - Buy Now and Pay later!

DuraVent Direct-Vent Pro 4" x 6-5/8" Direct-Vent Components - 46DVA

By

DuraVent

Model

46DVA

ID

14673

Availability: In Stock - Ready to Ship

Authorized DuraVent Dealer

Your Low Price $19.04

Required Fields *

Customize DuraVent Direct-Vent Pro 4" x 6-5/8" Direct-Vent Components - 46DVA
DuraVent DirectVent Pro 4" x 6-5/8"

$19.04

Accessories for this product
Call 1-800-397-1392 for Best Pricing
Customer Reviews
BBB Rating
Best Pricing

Description

DuraVent's stunning design and Engineered Excellence® utilizing state-of-the art manufacturing. DirectVent Pro features tight inner connections for superb performance, with no gaskets or sealants required (unless specified by the appliance manufacturer). All black pipe lengths, pipe extensions, and elbows feature laser-welded outer wall seams for a sleek finish. Low-profile locks and no hems or beads allow for a beautiful product that looks elegant in any interior.
DuraVent DirectVent Pro is a coaxial (concentric- pipe within a pipe) venting system designed for use with direct vent natural gas or propane stoves, heaters, and fireplaces. The inner pipe exhausts the flue gases to the outside while the space between the inner and outer pipes brings in outside air that is used for the appliance's combustion. This allows most appliances the ability to vent both vertically and horizontally per the appliance manufacturer's instructions. Please review appliance's owner's manual will advise as to which type of DirectVent pipe is right for your appliance.

DuraVent DirectVent Pro 1- 35' x 3" And 1- 35' x 4" DV Insert Liner Kit- Prairie Cap

Co Linear 'Masonry Chimney Conversion Kit (includes: 1-3" And 1-4" flex runs 35ft, and Prarie cap)

DuraVent DirectVent Pro 1- 35' x 3" And 1- 35' x 4" DV Insert Liner Kit- Standard Cap

Co Linear 'Masonry Chimney Conversion Kit (includes: 1-3" And 1-4" flex runs 35ft, and high wind cap)

DuraVent DirectVent Pro 12" Pipe Length (Black)

Designed for appliances tested and listed for direct vent. Features a fully unitized twist-lock construction in both 4” x 6 5⁄8” and 5” x 8” vent sizes. Use of sealant is optional, unless specified by the appliance manufacturer. To calculate install length, subtract 1 1⁄2” for each joint. No beads or hems. Black pipe lengths feature exterior laser-welded seams.

DuraVent DirectVent Pro 12" Pipe Length (Galvanized)

Designed for appliances tested and listed for direct vent. Features a fully unitized twist-lock construction in both 4” x 6 5⁄8” and 5” x 8” vent sizes. Use of sealant is optional, unless specified by the appliance manufacturer. To calculate install length, subtract 1 1⁄2” for each joint. No beads or hems. Black pipe lengths feature exterior laser-welded seams.

DuraVent DirectVent Pro 18" Pipe Length (Black)

Designed for appliances tested and listed for direct vent. Features a fully unitized twist-lock construction in both 4” x 6 5⁄8” and 5” x 8” vent sizes. Use of sealant is optional, unless specified by the appliance manufacturer. To calculate install length, subtract 1 1⁄2” for each joint. No beads or hems. Black pipe lengths feature exterior laser-welded seams.

DuraVent DirectVent Pro 18" Pipe Length (Galvanized)

Designed for appliances tested and listed for direct vent. Features a fully unitized twist-lock construction in both 4” x 6 5⁄8” and 5” x 8” vent sizes. Use of sealant is optional, unless specified by the appliance manufacturer. To calculate install length, subtract 1 1⁄2” for each joint. No beads or hems. Black pipe lengths feature exterior laser-welded seams.

DuraVent DirectVent Pro 2- 35' x 3" DV Insert Liner Kit- Prairie Cap

Co Linear 'Masonry Chimney Conversion Kit (includes: 2-3" flex runs 35ft, and Prarie cap)

DuraVent DirectVent Pro 2- 35' x 3" DV Insert Liner Kit- Standard Cap

Co Linear 'Masonry Chimney Conversion Kit (includes: 2-3" flex runs 35ft, and high wind cap)

DuraVent DirectVent Pro 24" Pipe Length (Black)

Designed for appliances tested and listed for direct vent. Features a fully unitized twist-lock construction in both 4” x 6 5⁄8” and 5” x 8” vent sizes. Use of sealant is optional, unless specified by the appliance manufacturer. To calculate install length, subtract 1 1⁄2” for each joint. No beads or hems. Black pipe lengths feature exterior laser-welded seams.

DuraVent DirectVent Pro 24" Pipe Length (Galvanized)

Designed for appliances tested and listed for direct vent. Features a fully unitized twist-lock construction in both 4” x 6 5⁄8” and 5” x 8” vent sizes. Use of sealant is optional, unless specified by the appliance manufacturer. To calculate install length, subtract 1 1⁄2” for each joint. No beads or hems. Black pipe lengths feature exterior laser-welded seams.

DuraVent DirectVent Pro 36" Pipe Length (Black)

Designed for appliances tested and listed for direct vent. Features a fully unitized twist-lock construction in both 4” x 6 5⁄8” and 5” x 8” vent sizes. Use of sealant is optional, unless specified by the appliance manufacturer. To calculate install length, subtract 1 1⁄2” for each joint. No beads or hems. Black pipe lengths feature exterior laser-welded seams.

DuraVent DirectVent Pro 36" Pipe Length (Galvanized)

Designed for appliances tested and listed for direct vent. Features a fully unitized twist-lock construction in both 4” x 6 5⁄8” and 5” x 8” vent sizes. Use of sealant is optional, unless specified by the appliance manufacturer. To calculate install length, subtract 1 1⁄2” for each joint. No beads or hems. Black pipe lengths feature exterior laser-welded seams.

DuraVent DirectVent Pro 45° Elbow (Black)

Use to offset obstructions as needed. Fully unitized, twist-lock construction. Elbows swivel, allowing the lock to remain fully engaged while aligning to the desired direction. The angle will remain fixed at 45°

DuraVent DirectVent Pro 45° Elbow (Galvanized)

Use to offset obstructions as needed. Fully unitized, twist-lock construction. Elbows swivel, allowing the lock to remain fully engaged while aligning to the desired direction. The angle will remain fixed at 45°

DuraVent DirectVent Pro 48" Pipe Length (Black)

Designed for appliances tested and listed for direct vent. Features a fully unitized twist-lock construction in both 4” x 6 5⁄8” and 5” x 8” vent sizes. Use of sealant is optional, unless specified by the appliance manufacturer. To calculate install length, subtract 1 1⁄2” for each joint. No beads or hems. Black pipe lengths feature exterior laser-welded seams.

DuraVent DirectVent Pro 48" Pipe Length (Galvanized)

Designed for appliances tested and listed for direct vent. Features a fully unitized twist-lock construction in both 4” x 6 5⁄8” and 5” x 8” vent sizes. Use of sealant is optional, unless specified by the appliance manufacturer. To calculate install length, subtract 1 1⁄2” for each joint. No beads or hems. Black pipe lengths feature exterior laser-welded seams.

DuraVent DirectVent Pro 4X6 Diameter 16" Pipe Extension

Use to add length to a straight length of DirectVent Pro. 8 ½” pipe adds 3”- 7” of length, 16” pipe adds 3”- 14 ½” of length, when used with rigid sections of pipe. Direct vent lengths feature a fully unitized, twist-lock construction. Use of sealant is optional, unless specified by the appliance manufacturer. Available in black or galvalume exterior (both feature laser-welded outer wall seams). Does not fit DirectVent GS pipe.

DuraVent DirectVent Pro 4X6 Diameter 16" Pipe Extension Black

Use to add length to a straight length of DirectVent Pro. 8 ½” pipe adds 3”- 7” of length, 16” pipe adds 3”- 14 ½” of length, when used with rigid sections of pipe. Direct vent lengths feature a fully unitized, twist-lock construction. Use of sealant is optional, unless specified by the appliance manufacturer. Available in black or galvalume exterior (both feature laser-welded outer wall seams). Does not fit DirectVent GS pipe.

DuraVent DirectVent Pro 6" Pipe Length (Black)

Designed for appliances tested and listed for direct vent. Features a fully unitized twist-lock construction in both 4” x 6 5⁄8” and 5” x 8” vent sizes. Use of sealant is optional, unless specified by the appliance manufacturer. To calculate install length, subtract 1 1⁄2” for each joint. No beads or hems. Black pipe lengths feature exterior laser-welded seams.

DuraVent DirectVent Pro 6" Pipe Length (Galvanized)

Designed for appliances tested and listed for direct vent. Features a fully unitized twist-lock construction in both 4” x 6 5⁄8” and 5” x 8” vent sizes. Use of sealant is optional, unless specified by the appliance manufacturer. To calculate install length, subtract 1 1⁄2” for each joint. No beads or hems. Black pipe lengths feature exterior laser-welded seams.

DuraVent DirectVent Pro 60" Pipe Length (Black)

Designed for appliances tested and listed for direct vent. Features a fully unitized twist-lock construction in both 4” x 6 5⁄8” and 5” x 8” vent sizes. Use of sealant is optional, unless specified by the appliance manufacturer. To calculate install length, subtract 1 1⁄2” for each joint. No beads or hems. Black pipe lengths feature exterior laser-welded seams.

DuraVent DirectVent Pro 60" Pipe Length (Galvanized)

Designed for appliances tested and listed for direct vent. Features a fully unitized twist-lock construction in both 4” x 6 5⁄8” and 5” x 8” vent sizes. Use of sealant is optional, unless specified by the appliance manufacturer. To calculate install length, subtract 1 1⁄2” for each joint. No beads or hems. Black pipe lengths feature exterior laser-welded seams.

DuraVent DirectVent Pro 8-1/2" Pipe Extension (Black)

Use to add length to a straight length of DirectVent Pro. 8 ½” pipe adds 3”- 7” of length, 16” pipe adds 3”- 14 ½” of length, when used with rigid sections of pipe. Direct vent lengths feature a fully unitized, twist-lock construction. Use of sealant is optional, unless specified by the appliance manufacturer. Available in black or galvalume exterior (both feature laser-welded outer wall seams). Does not fit DirectVent GS pipe.

DuraVent DirectVent Pro 8-1/2" Pipe Extension (Galvanized)

Use to add length to a straight length of DirectVent Pro. 8 ½” pipe adds 3”- 7” of length, 16” pipe adds 3”- 14 ½” of length, when used with rigid sections of pipe. Direct vent lengths feature a fully unitized, twist-lock construction. Use of sealant is optional, unless specified by the appliance manufacturer. Available in black or galvalume exterior (both feature laser-welded outer wall seams). Does not fit DirectVent GS pipe.

DuraVent DirectVent Pro 9" Pipe Length (Black)

Designed for appliances tested and listed for direct vent. Features a fully unitized twist-lock construction in both 4” x 6 5⁄8” and 5” x 8” vent sizes. Use of sealant is optional, unless specified by the appliance manufacturer. To calculate install length, subtract 1 1⁄2” for each joint. No beads or hems. Black pipe lengths feature exterior laser-welded seams.

DuraVent DirectVent Pro 9" Pipe Length (Galvanized)

Designed for appliances tested and listed for direct vent. Features a fully unitized twist-lock construction in both 4” x 6 5⁄8” and 5” x 8” vent sizes. Use of sealant is optional, unless specified by the appliance manufacturer. To calculate install length, subtract 1 1⁄2” for each joint. No beads or hems. Black pipe lengths feature exterior laser-welded seams.

DuraVent DirectVent Pro 90° Elbow (Black)

Use to offset obstructions as needed. Fully unitized, twist-lock construction. Elbows swivel, allowing the lock to remain fully engaged while aligning to the desired direction. The angle will remain fixed at 90°

DuraVent DirectVent Pro 90° Elbow (Galvanized)

Use to offset obstructions as needed. Fully unitized, twist-lock construction. Elbows swivel, allowing the lock to remain fully engaged while aligning to the desired direction. The angle will remain fixed at 90°

DuraVent DirectVent Pro Adjustable Roof Flashing 0/12 - 6/12

Use to support vent pipe. Provides 1” clearance. Recommend installing Wall Straps at 4-foot intervals on vertical runs.

DuraVent DirectVent Pro Attic Insulation Shield

Required for installations that pass through an attic to prevent insulation and debris from accumulating near the vent. Provides 1” clearance to combustibles. Includes base w/tube, extension tube and collar.

DuraVent DirectVent Pro Cathedral Ceiling Support Box

Use to pass through ceiling and support pipe. May be used on vaulted or flat ceilings. Painted black. Trim and clamp included.

DuraVent DirectVent Pro Ceiling Firestop

Required for multi-story vertical installations at the second floor and any subsequent floors. 4”x 6 5⁄8” style may vary.

DuraVent DirectVent Pro DSA Flashing 0/12 - 6/12

Use with metal or tile roofs. Available in sizes 4”x 6 5⁄8” and 5”x 8”, in 0/12-6/12 (shown) and 7/12-12/12 styles. Made of malleable dead soft aluminum. Refer to roof ashings tables (previous page) for dimensions.

DuraVent DirectVent Pro DSA Flashing 7/12 - 12/12

Use with metal or tile roofs. Available in sizes 4”x 6 5⁄8” and 5”x 8”, in 0/12-6/12 and 7/12-12/12 (shown) styles. Made of malleable dead soft aluminum. Refer to roof ashings tables (previous page) for dimensions.

DuraVent DirectVent Pro Elbow Strap

Use for supporting vent pipe between osets.

DuraVent DirectVent Pro Flat Roof Flashing

Use to weather proof the penetration of vent pipe through the roof. Storm Collar required. Use on flat roofs, chase enclosures, or masonry chimney. Made of galvalume.

DuraVent DirectVent Pro High Wind Sconce Cap

Use for horizontal through-the-wall termination. Provides improved performance in high wind conditions. Check installation instructions for restrictions on horizontal cap terminations, such as minimum distance from windows and doors. Available in aluminum, stainless steel (S), and copper (C). Check with appliance manufacturer for approval. Patented. Includes heat deector that may be required by appliance manufacturer

DuraVent DirectVent Pro High-Wind Termination Cap

Use for vertical terminations only. Provides improved performance in high wind conditions. For vertical terminations only. Available in aluminum.

DuraVent DirectVent Pro Horizontal Windguard

Use with through-the-wall termination cap where high winds are present. Also use as a safety heat shield to prevent children or others from coming into contact with the vent termination cap. Fits both 4” x 6 5⁄8” and 5” x 8” terminations.

DuraVent DirectVent Pro Low-Profile Termination Cap (Aluminum)

Use for vertical terminations only. Check the appliance manufacturer’s instructions to determine which caps are approved for use with their appliance. Available in aluminum and stainless steel (S).

DuraVent DirectVent Pro Round Ceiling Support/Wall Thimble Cover

Use as a decorative cover for horizontal (through-wall) installations or for flat ceiling installations. Fits over the Wall Thimble face plate. Comes with an insulation ring to reduce air infiltration where the pipe slips through the thimble. Painted black.

DuraVent DirectVent Pro Round Horizontal Termination Cap Square Base (Aluminum)

Use for through-the-wall termination. Check installation instructions for restrictions on horizontal cap terminations, such as minimum distance from windows and doors. Available in aluminum only. Check with appliance manufacturer for approval.

DuraVent DirectVent Pro Sconce Termination Cap (Aluminum)

Use for horizontal through-the-wall termination. Check installation instructions for restrictions on horizontal cap terminations, such as minimum distance from windows and doors. Available in aluminum, stainless steel (S), and copper (C). Check with appliance manufacturer for approval. Patented.

DuraVent DirectVent Pro Snorkel Termination Cap 14 Inch

Use for horizontal through-the-wall termination when a vertical rise is desired in the system to meet appliance manufacturer recommended minimum heights. Do not enclose in the wall or install below grade.

DuraVent DirectVent Pro Snorkel Termination Cap 36 Inch

Use for horizontal through-the-wall termination when a vertical rise is desired in the system to meet appliance manufacturer recommended minimum heights. Do not enclose in the wall or install below grade.

DuraVent DirectVent Pro Square Horizontal Termination Cap (Aluminum)

Use for standard and high-wind through-the-wall termination. Check installation instructions for restrictions on horizontal cap terminations, such as minimum distance from windows and doors. Available in aluminum, stainless steel (S), and copper (C).

DuraVent DirectVent Pro Steep Roof Flashing 7/12 - 12/12

Use to weather proof the penetration of vent pipe through the roof. Storm Collar required. For roof pitches of 7/12 - 12/12. Made of galvalume.

DuraVent DirectVent Pro Storm Collar

Use to maintain a weather tight resistant seal between the pipe and the ashing.

DuraVent DirectVent Pro Vertical Wind Guard

Use only with High Wind Termination Cap when additional wind protection is needed. Fits both 4” x 6 5⁄8” and 5” x 8” terminations.

DuraVent DirectVent Pro Vinyl Siding Standoff

Use as a heat shield on structures with vinyl siding, or other temperature sensitive materials, to help prevent warping and or melting of the material. Use only on horizontal terminations and on any irregular surfaced siding (ie: ship lap siding, shake shingle siding) so cap is not embedded in the siding. Sized for Square Horizontal Cap.

DuraVent DirectVent Pro Vinyl Siding Standoff Kit

Use as a heat shield on structures with vinyl siding, or other temperature sensitive materials, to help prevent warping and or melting of the material. Use only on horizontal terminations and on any irregular surfaced siding (ie: ship lag siding, shake shingle siding) so cap is not embedded in the siding. Kit includes 4-pieces; sized for Square Horizontal Cap only. Stainless steel (SS) and Copper (C) available

DuraVent DirectVent Pro Vinyl Siding Standoff Kit (SS)

Use as a heat shield on structures with vinyl siding, or other temperature sensitive materials, to help prevent warping and or melting of the material. Use only on horizontal terminations and on any irregular surfaced siding (ie: ship lag siding, shake shingle siding) so cap is not embedded in the siding. Kit includes 4-pieces; sized for Square Horizontal Cap only. Stainless steel (SS) and Copper (C) available.

DuraVent DirectVent Pro Vinyl Siding Standoff Kit (SS) - Reduced

Use as a heat shield on structures with vinyl siding, or other temperature sensitive materials, to help prevent warping and or melting of the material. Use only on horizontal terminations and on any irregular surfaced siding (ie: ship lag siding, shake shingle siding) so cap is not imbedded in the siding. Kit includes 4-pieces; sized for Square Horizontal Cap only. Stainless steel (SS) and Copper (C) available.

DuraVent DirectVent Pro Vinyl Siding Standoff Kit (SS) Square

Use as a heat shield on structures with vinyl siding, or other temperature sensitive materials, to help prevent warping and or melting of the material. Use only on horizontal terminations and on any irregular surfaced siding (ie: ship lag siding, shake shingle siding) so cap is not embedded in the siding. Kit includes 4-pieces; sized for Sconce Cap, Round Horizontal Cap and H2 Horizontal Cap only. Stainless steel (SS) and Copper (C) available. Use for 4”x 6 5⁄8” and 5”x 8” diameters.

DuraVent DirectVent Pro Vinyl Siding Standoff Kit - Reduced

Use as a heat shield on structures with vinyl siding, or other temperature sensitive materials, to help prevent warping and or melting of the material. Use only on horizontal terminations and on any irregular surfaced siding (ie: ship lag siding, shake shingle siding) so cap is not embedded in the siding. Kit includes 4-pieces; sized for Sconce Cap, Round Horizontal Cap and H2 Horizontal Cap only. Stainless steel (SS) and Copper (C) available. Use for 4”x 6 5⁄8” and 5”x 8” diameter

DuraVent DirectVent Pro Wall Firestop

Wall Firestop

DuraVent DirectVent Pro Wall Thimble

Provides a complete wall-pass-through and restop. Use with Square Horizontal Cap only. May be required in Canada. Refer to the appliance manufacturer’s installation instructions for requirements.

DuraVent DirectVent Pro Wall Thimble - Reduced

Provides a complete wall-pass-through and restop. Use with Round Horizontal Cap, Sconce Cap and H2 Horizontal Cap only. May be required in Canada. Refer to the appliance manufacturer’s installation instructions for requirements.

Product Specifications

More Information
DuraVent Direct-Vent Pro 4" x 6-5/8" Direct-Vent Components - 46DVA
SKU46DVA
Brand/ManufacturerDuraVent
MaterialAluminum|Galvanized
TypeDirect Vent
CertificationSee Fireplace Manual
Diameter4 Inches
Resources You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING

Reviews

Write Your Own Review
You're reviewing:DuraVent Direct-Vent Pro 4" x 6-5/8" Direct-Vent Components - 46DVA
Your Rating

Questions and Answers

Customer Questions
No Questions
Did you find what you were looking for?

WHY CHOOSE HVACDIRECT.COM?

Our mission is simple: To provide an open HVAC marketplace online, offering the best HVAC brands directly to the public, based on real, affordable prices. For too long, local dealers have charged whatever they could get away with - but now YOU HAVE A CHOICE.

 

Choose us for:

  • Real recommendations on only what you need (no upsells)
  • Real wholesale prices, never inflated
  • Real advice & tech support from experts in home heating & cooling
Money Icon

COMPETITIVE PRICING

We sell products at wholesale pricing. No markups, no hidden fees. Our average customer saves BETWEEN THREE TO SIX THOUSAND DOLLARS
-That's the Direct Advantage!

Best Brands

BEST BRANDS

Just because a brand is nationally known, doesn't mean it's the best. Our HVAC technicians have hand-selected the most efficient and durable products for American homeowners, giving you exactly what you need at the best pricing.

Warranty

INDUSTRY-LEADING WARRANTIES

We choose products with long, best-in-the-market warranties by manufacturers with great customer service and solid reputations. This gives you peace of mind that you'll be getting a great quality product.

Huge Savings
Read about a real life example from one of our
customers who saved thousand.

We've helped over 100,000 American homeowners and earned their trust.

See What Our Customers are Saying