iON Digital Level Switch | 115V | 10 FT Cord | iN-006-010-10PA-B

Reliable Digital Level Control for Automatic Pump Operation

The iON Switch is a digital level control designed for automatic sump and sewage pump operation. Its piggyback-style design uses solid-state sensing without moving parts or contact points to activate a compatible pump when water reaches the preset level.

Compatible with 115-volt pumps rated up to 15 amps, the iON Switch is also inverter rated for use with most battery backup pump systems. Its leak-resistant, non-corrosive enclosure and 10-foot power cord provide durability and installation flexibility for residential pumping applications.

Product Features:

• Digital Solid-State Sensing: Automatically activates compatible sump or sewage pumps when water reaches the preset activation level without using mechanical moving parts.
• Piggyback-Style Design: Connects between the pump plug and power source to provide automatic level control without requiring a conventional mechanical float switch.
• 115V, 15-Amp Rating: Designed for compatible 115-volt pumps rated up to 12 FLA and 15 amps maximum.
• Inverter Rated: Compatible with most battery backup pump systems and inverter-based power sources for flexible backup applications.
• Durable 6-Inch Pump Range: Provides a 6-inch operating range and features a leak-resistant, non-corrosive enclosure with a 10-foot power cord.

Automatic Sump and Sewage Pump Control

The iON Switch provides automatic water-level control for compatible sump and sewage pumps. Its solid-state sensor detects the water level and activates the connected pump when the preset operating level is reached.

With no moving parts or contact points, the digital sensing design eliminates the mechanical components commonly used in traditional float switches, providing a stationary level-control solution for residential pumping systems.

Battery Backup Compatibility

The iON Switch is inverter rated for integration with most battery backup pump systems. This allows automatic pump level control to remain compatible with systems where an inverter or backup power source supplies electricity to the pump.

Before installation, verify that the pump, switch, inverter, battery system, and electrical connections are properly rated and compatible with the intended application.

Durable, Leak-Resistant Construction

The iON Switch features a leak-resistant, non-corrosive enclosure designed to protect the switch components in sump and sewage environments. Its 10-foot power cord provides additional flexibility during installation.

Installation and Compatibility

The iON Switch is designed for straightforward automatic level control of compatible 115-volt sump and sewage pumps. Confirm that the connected pump does not exceed the 15-amp maximum rating and that the electrical supply and backup system are appropriate for the application.

Install the switch according to the manufacturer's instructions and applicable local electrical and plumbing codes.

Warranty

The iON Switch includes a 3-year warranty. For proper installation and long-term performance, verify pump compatibility, electrical requirements, installation conditions, and applicable local codes before installation. Refer to the manufacturer's operation manual for complete installation, operation, maintenance, and safety requirements.