iON Sewage Pump | 1/2 HP | 2" NPT | 80 GPM | 21 Ft Head | X-ONEi+

Versatile Pumping with Automatic Control & High-Water Protection

Get versatile pumping performance from the iON X-ONEi+, a 1/2 HP all-in-one pump designed for residential basement sump, septic tank effluent, and sewage ejector applications. With up to 80 GPM capacity, up to 21 feet of maximum head, and 1-1/2- to 2-inch solids handling, it provides dependable water, effluent, and sewage removal for a range of residential needs.

The X-ONEi+ includes the iON+ Switch with an integrated high-water alarm for automatic level control and added flood protection. Its durable cast iron and engineered thermoplastic construction, oil-filled motor, and non-clog impeller are designed for reliable performance in demanding residential applications.

Product Features:

• 1/2 HP Motor: Provides dependable pumping performance for basement sump, septic tank effluent, and sewage ejector applications.
• Up to 80 GPM & 21 Ft. Head: Provides high-volume pumping capacity with the lift needed for many residential installations.
• iON+ Switch with High-Water Alarm: Provides automatic level control with solid-state sensing and visual and audible alerts for elevated water conditions.
• 1-1/2- to 2-Inch Solids Handling: Handles larger solids for greater versatility across sump, effluent, and sewage applications.
• Durable Non-Clog Pump Design: Combines cast iron and engineered thermoplastic construction with a thermoplastic non-clog impeller for dependable operation.

All-in-One Residential Pump

The iON X-ONEi+ is designed to serve multiple residential pumping needs with one versatile pump platform. It is suitable for basement sump, septic tank effluent, and sewage ejector applications where larger solids-handling capability is required.

Its combination of high pumping capacity and large solids handling provides flexibility for residential systems that require more than a conventional small-solids sewage pump.

Built-In High-Water Alarm

The included iON+ Switch provides automatic level control without the moving parts or contact points found in traditional mechanical float switches. This solid-state design provides dependable level sensing during normal pump operation.

The integrated high-water alarm provides visual and audible notification when elevated water levels are detected, helping users identify potentially abnormal water conditions.

Durable Motor and Pump Construction

The X-ONEi+ features an oil-filled motor with automatic reset thermal overload protection, upper and lower ball bearings, and a carbon ceramic mechanical seal. These components are designed to support dependable operation and protect the pump during normal use.

Its cast iron and engineered thermoplastic construction provides durability, while the thermoplastic non-clog impeller is designed to move larger solids while helping reduce clogging.

Pump Sizing and Installation

The X-ONEi+ provides up to 80 GPM of maximum pumping capacity and up to 21 feet of maximum head. Actual performance will vary according to total system head, discharge configuration, and operating conditions.

The pump features a 2-inch discharge with a 1-1/2-inch reducer and includes a 10-foot power cord. An 18-inch by 24-inch minimum basin is recommended. The pump is designed for intermittent pumped-liquid temperatures up to 120°F.

Always follow the manufacturer's installation instructions and applicable plumbing and electrical codes when installing or servicing the pump.

Warranty

The iON X-ONEi+ includes a 3-year warranty. For proper installation and long-term performance, verify the required basin dimensions, discharge piping, electrical supply, pump configuration, pumped-liquid temperature, solids-handling requirements, and applicable local codes before installation. Refer to the manufacturer's operation manual for complete installation, operation, maintenance, and safety requirements.

Why Choose the iON X-ONEi+ Sewage Pump?