Your cookie preferences
We use cookies to remember your preferences and understand how shoppers use our site, helping us improve your shopping experience.
Read our privacy policyThe L.B. White Tradesman® 125 is a portable, direct-fired propane heater designed to provide dependable supplemental heating for construction sites, industrial work areas, agricultural facilities, and other suitable ventilated environments. With an adjustable heating output ranging from 70,000 to 125,000 BTU/h, this forced-air heating system combines electronic spark ignition, directional heat adjustment, and variable heat output to support flexible heating performance. Its rugged steel construction with a Tri-Shield protective finish helps resist abrasion and corrosion, while its compact design supports convenient transportation and deployment between work areas.
The L.B. White Tradesman® 125 delivers an adjustable heating output ranging from 70,000 to 125,000 BTU/h. This variable-output performance allows users to select an appropriate heating level for the application, helping accommodate different ambient conditions and supplemental heating requirements. The heater provides a rated heated-air output of 400 CFM. Actual heating performance and the area that can be heated depend on ambient temperature, building construction, air infiltration, ventilation, and other site conditions.
The L.B. White Tradesman® 125 uses direct-fired liquid propane gas (LP) heating technology. Its burner heats the air directly as the fan moves air through the heater, providing rapid delivery of warm air without an indirect-fired heat exchanger. The manufacturer specifies a fuel efficiency of 99.97% for its direct-fired heaters. Because combustion products enter the heated airstream, the unit must be operated only in environments permitted by the manufacturer's instructions, with the required ventilation and safeguards. It is not suitable for enclosed or occupied spaces unless the manufacturer specifically permits the application and all applicable ventilation and safety requirements are met.
The L.B. White Tradesman® 125 provides a rated heated-air output of 400 cubic feet per minute (CFM). Its integrated fan distributes heated air toward the intended work area, while the adjustable front leg allows directional positioning of the heater. This combination supports targeted supplemental heating in suitable construction, industrial, and agricultural environments. Keep the air inlet and outlet unobstructed during operation and maintain all clearances specified in the manufacturer's instructions.
The L.B. White Tradesman® 125 features a compact steel construction designed for portable deployment at suitable work locations. Manufacturer-published dimensions are approximately 25.6 inches long, 11.8 inches wide, and 16 inches high, with a net weight of approximately 22 lb and a shipping weight of approximately 28 lb. The adjustable front leg helps direct the heated-air stream toward the target area. The heater requires an appropriate propane supply, compatible gas pressure regulation, and a suitable electrical connection for ignition and fan operation. Installation and positioning must follow the manufacturer's instructions and applicable local codes.
The L.B. White Tradesman® 125 operates on liquid propane gas (LP). Manufacturer-published fuel consumption ranges from approximately 3.2 to 5.8 lb/h, depending on the selected heat output. The specified LP inlet gas pressure is 11.0 inches of water column. A gas pressure regulator with POL connection and a gas hose are identified as standard equipment in the manufacturer's product specifications. The heater also requires a 115 V, 60 Hz, single-phase electrical supply for operation, with a starting current of approximately 2.0 A and continuous operating current of approximately 0.70 A. Use the correct fuel supply, regulator, hose, and electrical connection for the exact unit, and follow all manufacturer requirements for safe setup and operation.
The L.B. White Tradesman® 125 features adjustable heat output to accommodate varying heating requirements and an electronic spark ignition system for burner ignition. The manufacturer does not list a unit-mounted thermostat as standard for this model. Electrical specifications identify a 115 V, 60 Hz, single-phase supply, with approximately 2.0 A starting current and 0.70 A continuous operating current. The manufacturer-published specifications do not establish a specific NEMA plug configuration or power cord length. Verify the electrical connection, grounding, gas pressure, and regulator requirements against the unit's nameplate and current owner's manual before operation.
The L.B. White Tradesman® 125 is designed for portable supplemental heating in suitable construction, industrial, and agricultural environments. Manufacturer product literature identifies Tradesman heaters for applications including construction work sites, industrial facilities, swine buildings, and greenhouses. Its adjustable 70,000 to 125,000 BTU/h output, directional forced-air delivery, and portable construction make it suitable for work areas requiring targeted heat and a compatible propane supply. Since the heater is direct-fired, its use must comply with the manufacturer's ventilation requirements, applicable fuel-burning equipment regulations, and site safety procedures.
The L.B. White Tradesman® 125 has a net weight of approximately 22 lb and a compact footprint of 25.6 inches long, 11.8 inches wide, and 16 inches high. These dimensions support convenient handling and positioning between suitable work areas. Its adjustable front leg allows the heated-air stream to be directed toward the intended location. Place the heater on a stable surface, secure the propane supply according to the manufacturer's instructions, and maintain the required separation from combustible materials. Disconnect the fuel and electrical supplies as directed before transporting or servicing the unit.
The L.B. White Tradesman® 125 includes a high-temperature safety switch designed to provide protection against excessive operating temperatures. Its electronic spark ignition supports burner startup, while the manufacturer's specified regulator and gas hose support the propane connection. The standard Tradesman 125 model does not list an air-flow safety switch or the Service Saver self-diagnostic system offered on certain Ultra models. Inspect the heater, gas hose, regulator, fittings, and electrical components before use, and check gas connections for leaks using an approved procedure. Maintain proper ventilation, keep combustible materials clear of the heater, and never operate the unit in an environment prohibited by the manufacturer. Follow the current owner's manual for startup, shutdown, cleaning, maintenance, storage, and service procedures.
Warranty coverage for the L.B. White Tradesman® 125 should be confirmed through L.B. White or an authorized dealer before purchase. The manufacturer's publicly available product literature does not establish a complete model-specific warranty duration and coverage breakdown. Refer to the applicable written warranty for coverage terms, exclusions, registration requirements, and any installation, operation, or maintenance conditions.
Experience dependable portable heating with the L.B. White Tradesman® 125 Forced-Air Propane Heater. Combining adjustable heating output from 70,000 to 125,000 BTU/h with 400 CFM airflow, electronic spark ignition, directional heat adjustment, and a durable Tri-Shield protective finish, this portable heater provides targeted supplemental heat for suitable construction, industrial, and agricultural applications. Its compact design and variable heat output support flexible deployment wherever propane-fired heating is appropriate and the required ventilation, fuel supply, and electrical connection are available.