Your cookie preferences
We use cookies to remember your preferences and understand how shoppers use our site, helping us improve your shopping experience.
Read our privacy policyThe L.B. White Tradesman® 170 Ultra is a high-output portable forced-air propane heater designed to provide dependable supplemental heating for construction sites, industrial work areas, and other suitable temporary-heating environments. Delivering adjustable heating output from 125,000 to 170,000 BTU/h, this direct-fired heating system combines electronic spark ignition, thermostatic temperature control, and variable heat output to accommodate changing heating demands. Its integrated Self Diagnostic Service Saver system with an illuminated diagnostic light supports troubleshooting, while the heavy-gauge combustion chamber, durable Tri-Shield™ protective finish, and adjustable front leg provide durability and directional heat delivery for demanding work environments.
The L.B. White Tradesman® 170 Ultra provides adjustable heating output from 125,000 to 170,000 BTU/h. This variable-output performance allows users to adjust heating capacity according to changing ambient conditions and supplemental heating requirements. Its forced-air system delivers a rated heated-air output of 550 cubic feet per minute (CFM), helping distribute warmth toward the intended work area. The adjustable output supports efficient fuel use while providing the high heating capacity required for demanding temporary-heating applications. Actual heating performance and coverage depend on ambient temperature, building construction, ventilation, air infiltration, and other site conditions.
The L.B. White Tradesman® 170 Ultra uses direct-fired forced-air heating technology powered by liquid propane gas (LP). The burner heats the air directly, and the integrated fan distributes the heated airstream into the surrounding area. The manufacturer specifies a direct-fired fuel efficiency of 99.97%. The propane model provides adjustable heating output from 125,000 to 170,000 BTU/h, allowing the unit to respond to different heating demands. Because combustion products enter the heated airstream, adequate ventilation is essential. This heater is intended for temporary construction heating and must not be used to heat human living quarters or in unventilated areas. Operation must comply with the manufacturer's instructions and applicable safety requirements.
The L.B. White Tradesman® 170 Ultra provides a rated heated-air output of 550 CFM. Its integrated fan circulates heated air toward the intended work area, supporting directional supplemental heating in suitable construction and industrial environments. The adjustable front leg helps position the heater for targeted heat delivery, while variable heating output allows users to adjust performance to changing site conditions. Keep the air intake and discharge openings unobstructed during operation, maintain all manufacturer-specified clearances, and do not attach ductwork to the hot-air discharge unless expressly authorized by the manufacturer.
The L.B. White Tradesman® 170 Ultra features a portable construction designed for temporary heating applications. Its adjustable front leg supports directional positioning, allowing the heated-air stream to be aimed toward the intended work area. The unit requires a compatible propane supply, the manufacturer-specified regulator and gas connections, and a suitable grounded electrical supply for fan and ignition operation. Unlike permanently installed heating systems, its portable design supports deployment at different suitable work locations as heating requirements change. Position the heater on a stable surface, maintain the specified clearances from combustible materials, and follow the manufacturer's installation and operating instructions.
The L.B. White Tradesman® 170 Ultra operates on propane vapor withdrawal. Manufacturer-published fuel consumption ranges from approximately 5.8 to 7.9 lb/h, depending on the selected heating output. The specified propane inlet gas pressure is 11.1 inches of water column at the heater connection. The variable-output design allows the heater to operate at a lower heating input when full capacity is unnecessary, helping manage fuel consumption. The unit also requires a 120 V, 60 Hz, single-phase electrical supply for fan and ignition operation. The manufacturer's published specifications identify a starting current of 3.7 A and a continuous operating current of 1.0 A. Verify gas pressure, regulator compatibility, hose connections, electrical supply, and unit nameplate requirements before installation. Use only the fuel type approved for this model.
The L.B. White Tradesman® 170 Ultra includes thermostatic temperature control to regulate heating operation according to the selected temperature. Its electronic spark ignition supports burner startup, while the variable-output control allows the heating input to be adjusted to meet changing demand. The integrated Self Diagnostic Service Saver system provides diagnostic assistance, and an illuminated diagnostic light helps identify operating conditions that may require attention. Electrical specifications include a 120 V, 60 Hz, single-phase supply, a starting current of 3.7 A, and a continuous operating current of 1.0 A. Use a properly grounded electrical receptacle compatible with the factory-installed connection. Confirm plug configuration, circuit capacity, and connection requirements against the current owner's manual and unit nameplate before operation.
The L.B. White Tradesman® 170 Ultra is designed for temporary supplemental heating in suitable construction and industrial environments. Manufacturer literature identifies the Tradesman series for commercial, industrial, and construction worksites, as well as certain agricultural and greenhouse applications. Its adjustable 125,000 to 170,000 BTU/h heating output, 550 CFM heated-air delivery, and directional positioning support temporary heating where high-output forced-air heat is required. The Self Diagnostic Service Saver system also supports troubleshooting in demanding work environments. Because this is a direct-fired propane heater, the installation and application must provide the ventilation required by the manufacturer and comply with applicable fuel-gas regulations and site safety procedures.
The L.B. White Tradesman® 170 Ultra is designed for portable deployment between suitable work areas. Its adjustable front leg allows the heated-air stream to be directed toward the intended location, while its self-contained heater assembly supports temporary installation without a permanent HVAC system. Position the unit securely on a stable surface, maintain the specified clearances, and connect the propane supply and electrical power according to the manufacturer's instructions. Disconnect the fuel and electrical supplies as directed before moving, inspecting, or servicing the heater. Allow the unit to cool before handling components that may become hot during operation.
The L.B. White Tradesman® 170 Ultra incorporates electronic spark ignition, an air-proving switch, high-temperature safety protection, and the Self Diagnostic Service Saver system with an illuminated diagnostic light. These features support controlled operation, operating-condition monitoring, and troubleshooting. The heavy-gauge combustion chamber and burner plate are designed for demanding work environments, while the Tri-Shield™ protective finish helps resist abrasion and corrosion. Inspect the heater, electrical cord, propane hose, regulator, and gas fittings before each use. Check gas connections for leaks using an approved leak-detection procedure, provide adequate ventilation, and maintain all specified clearances from combustible materials. Never bypass safety devices, operate damaged equipment, or use the heater in an application prohibited by the manufacturer. Cleaning, maintenance, and gas-system servicing must follow the current owner's manual and be performed by appropriately qualified personnel.
Warranty coverage for the L.B. White Tradesman® 170 Ultra should be confirmed directly with L.B. White or an authorized dealer before purchase. Refer to the applicable written manufacturer warranty for the coverage duration, exclusions, registration requirements, and any installation, operation, or maintenance conditions that apply to this specific model. Warranty eligibility and coverage may depend on compliance with the manufacturer's installation, operating, and maintenance instructions.
Experience dependable supplemental heating with the L.B. White Tradesman® 170 Ultra Portable Forced-Air Propane Heater. Combining adjustable heating output from 125,000 to 170,000 BTU/h with 550 CFM heated-air delivery, thermostatic temperature control, electronic spark ignition, and the Self Diagnostic Service Saver system, this portable heater provides targeted warmth for suitable construction and industrial applications. Its variable-output heating technology, directional positioning, illuminated diagnostic light, and durable Tri-Shield™ protective finish support flexible deployment and convenient troubleshooting wherever propane-fired temporary heating is appropriate and the required fuel supply, electrical connection, and ventilation are available.
Posted on