LB White Tradesman 170N Portable Forced Air Heater - Natural Gas

SAVE $220.00
By

LB White

In stock
Model

Tradesman 170N

ID

151623

Was $770.00 Your Low Price Special Price $550.00
Ships in 2-3 Weeks
Free Shipping
 

High-Output 155,000 BTU Natural Gas Heater for Construction & Industrial Applications with Thermostatic Temperature Control

The L.B. White Tradesman® 170N is a commercial-grade portable natural gas forced-air heater designed to provide high-output supplemental heating for construction sites, industrial work areas, agricultural facilities, and other suitable ventilated environments. Delivering an adjustable heating input from 125,000 to 155,000 BTU/h, this direct-fired heating system combines dependable electronic spark ignition, thermostatic temperature control, and forced-air heat distribution to support temporary heating requirements. Its heavy-gauge combustion chamber, durable Tri-Shield protective finish, and portable construction support deployment between suitable work areas where a compatible natural gas supply is available.

Key Benefits

  • High-Output Heating Performance – Provides adjustable heating input from 125,000 to 155,000 BTU/h to accommodate changing supplemental heating requirements.
  • Direct-Fired Natural Gas Heating – Transfers combustion heat directly into the airstream, with manufacturer-stated direct-fired fuel efficiency of 99.97%.
  • Portable Construction – Compact dimensions and an approximate net weight of 29 lb support transportation and positioning between suitable work areas.
  • 550 CFM Heated-Air Output – Circulates heated air at a rated output of 550 CFM to distribute warmth toward the intended work area.
  • Flexible Installation – The portable design supports temporary deployment without requiring a permanent HVAC installation.
  • Natural Gas Operation – Uses a compatible natural gas supply, eliminating the need for propane cylinders or an onboard liquid-fuel tank.
  • Thermostatic Temperature Control – Integrated temperature control helps regulate heating operation according to the selected setting.
  • Integrated Safety Systems – Electronic spark ignition, high-temperature protection, and airflow safety controls support safer operation when used according to the manufacturer's instructions.

155,000 BTU/h Natural Gas Heating Performance

The L.B. White Tradesman® 170N provides adjustable heating input from 125,000 to 155,000 BTU/h. Its forced-air system delivers a rated heated-air output of 550 cubic feet per minute (CFM), helping distribute warmth throughout the intended work area. The variable-output design supports changing heating demands, while direct-fired heat transfer provides rapid delivery of heated air. Actual heating performance and coverage depend on ambient temperature, building construction, ventilation, air infiltration, and other site conditions.

Direct-Fired Natural Gas Heating Technology

The L.B. White Tradesman® 170N uses direct-fired forced-air heating technology powered by natural gas. The burner heats the air directly, and the integrated fan distributes the heated airstream into the surrounding area. The manufacturer states a direct-fired fuel efficiency of 99.97%. Because combustion products enter the heated airstream, adequate ventilation is essential. Operate the heater only in applications permitted by the manufacturer and applicable safety requirements. It must not be used to heat human living quarters or in unventilated spaces.

550 CFM Airflow & Heat Distribution

The L.B. White Tradesman® 170N provides a rated heated-air output of 550 CFM. Its integrated fan circulates heated air toward the intended work area, supporting temporary supplemental heating in suitable construction, industrial, and agricultural environments. The forced-air configuration helps distribute warmth beyond the immediate burner area. Keep the air intake and discharge openings unobstructed, maintain the manufacturer's specified clearances, and do not attach ductwork to the hot-air discharge.

Portable Design & Flexible Installation

The L.B. White Tradesman® 170N features a compact portable design intended for temporary heating applications. Manufacturer-published dimensions are approximately 24 inches long, 9.5 inches wide, and 16 inches high, with a net weight of approximately 29 lb and a shipping weight of approximately 33 lb. The unit requires a compatible natural gas supply, an appropriate gas regulator and connection arrangement, and a grounded electrical supply for fan and ignition operation. Position the heater on a stable surface and maintain all required clearances. Installation must comply with the manufacturer's instructions and applicable fuel-gas, electrical, and safety codes.

Natural Gas & Energy Management

The L.B. White Tradesman® 170N operates on natural gas, with a published fuel consumption range of approximately 125 to 155 cubic feet per hour. The manufacturer specifies an acceptable natural gas inlet pressure range of 7 to 13.5 inches of water column at the inlet of the supplied regulator. The burner manifold pressure is specified at 5.5 inches of water column. The heater requires a 120 V, 60 Hz, single-phase electrical supply for fan and ignition operation, with a listed starting current of 3.7 A and continuous operating current of 1.0 A. Confirm the available gas supply capacity, regulator arrangement, pressure requirements, electrical connection, and unit nameplate before installation. Do not connect the natural gas model to a propane supply.

Controls, Temperature Management & Electrical Connection

The L.B. White Tradesman® 170N includes thermostatic temperature control to regulate heating operation according to the selected setting. Its electronic spark ignition supports burner startup, while the integrated fan and safety controls support normal operation. The manufacturer specifies a 120 V, 60 Hz, single-phase electrical supply, with a starting current of 3.7 A and continuous operating current of 1.0 A. Use a properly grounded electrical receptacle compatible with the unit's factory-installed connection. Verify the plug configuration, power cord requirements, grounding, and circuit capacity against the current owner's manual and nameplate before operation.

Commercial, Construction & Industrial Applications

The L.B. White Tradesman® 170N is designed for temporary supplemental heating in suitable construction, industrial, and agricultural environments. Manufacturer literature identifies Tradesman forced-air heaters for commercial and industrial worksites, as well as greenhouse and agricultural applications. Its 155,000 BTU/h maximum heating input, 550 CFM heated-air output, and variable-output operation make it suitable for work areas requiring temporary heat where a compatible natural gas supply and adequate ventilation are available. Final suitability depends on the heating load, gas infrastructure, ventilation, and applicable site safety requirements.

Mobility & Deployment

The L.B. White Tradesman® 170N has compact dimensions of approximately 24 inches long, 9.5 inches wide, and 16 inches high. Its net weight of approximately 29 lb supports transportation and positioning between suitable work areas. Position the heater securely, maintain the required clearances, and connect the natural gas supply in accordance with the manufacturer's instructions. Disconnect the gas and electrical supplies as directed before moving or servicing the unit.

Safety, Service & Maintenance

The L.B. White Tradesman® 170N incorporates electronic spark ignition, high-temperature safety protection, and airflow safety controls. These systems help monitor operating conditions and support safe heater operation. The heavy-gauge combustion chamber and burner plate are designed for demanding work environments, while the Tri-Shield protective finish provides resistance to abrasion and corrosion. Inspect the heater, electrical cord, gas hose, regulator, and fittings before each use, and check gas connections for leaks using an approved leak-detection procedure. Maintain adequate ventilation and the specified clearances from combustible materials. Do not operate the heater with any safety device bypassed, and do not attach ductwork to the hot-air discharge. Cleaning, servicing, and gas-system adjustments must follow the owner's manual and be performed by appropriately qualified personnel.

Warranty

Warranty coverage for the L.B. White Tradesman® 170N should be confirmed directly with L.B. White or an authorized dealer before purchase. Refer to the applicable written manufacturer warranty for the coverage duration, exclusions, registration requirements, and any installation, operation, or maintenance conditions that apply to the specific model and configuration.

Recommended Accessories

  • Manufacturer-Specified Natural Gas Regulator – Use the regulator supplied or approved for the Tradesman® 170N and verify compatibility with the required inlet pressure and natural gas supply.
  • Natural Gas Supply Components – Provide correctly sized piping, shutoff valves, fittings, and other approved components in accordance with the manufacturer's installation requirements and applicable fuel-gas codes.
  • Electrical Power Connection Components – Use a compatible, properly grounded 120 V, 60 Hz electrical supply and manufacturer-approved connection components.
  • Manufacturer-Approved Replacement Parts – Verify model compatibility using official L.B. White parts diagrams and service documentation before ordering replacement components.

High-Output Natural Gas Heating with the L.B. White Tradesman® 170N

Experience dependable supplemental heating with the L.B. White Tradesman® 170N Natural Gas Forced-Air Heater. Combining adjustable heating input from 125,000 to 155,000 BTU/h with 550 CFM heated-air output, electronic spark ignition, thermostatic temperature control, and a durable Tri-Shield protective finish, this portable heater provides targeted warmth for suitable commercial, construction, industrial, and agricultural applications. Its compact design and variable-output heating technology support flexible deployment wherever natural gas-fired heating is appropriate and the required gas supply, electrical connection, and ventilation are available.

More Information
LB White Tradesman 170N Portable Forced Air Heater - Natural Gas
FeatureSpec
SKUTradesman 170N
Weight (in lbs)31
Brand/ManufacturerLB White
Heating BTU125,000 - 170,000
Maximum CFM550
Operating ModeHeating
Ignition Type Continuous Spark
Fuel TypeNatural Gas
ColorWhite
Length24"
Height16″
Width9.5″
Resources You will need Adobe Acrobat Reader to view PDF documents.
Safety Information
This gas appliance requires a trained technician to install. Improperly connecting gas lines or improperly connecting a gas flue or venting may result in death. By purchasing this item, you are agreeing that you are using a trained technician to install this gas appliance. We will not be responsible for any injury or property damage arising from improper service or service procedures. Whoever installs or services this unit assumes responsibility for any personal injury or property damage which may result. Many jurisdictions require a license to install this equipment.

PROPOSITION 65 WARNING
Write Your Own Review
You're reviewing:LB White Tradesman 170N Portable Forced Air Heater - Natural Gas
Your Rating
Customer Questions
No Questions
Did you find what you were looking for?
blockboard tech