Your cookie preferences
We use cookies to remember your preferences and understand how shoppers use our site, helping us improve your shopping experience.
Read our privacy policyThe L.B. White Tradesman® 400 is a commercial-grade portable forced-air propane heater designed to provide high-output supplemental heating for construction sites, industrial facilities, and other suitable temporary-heating environments. Delivering adjustable heating input from 250,000 to 400,000 BTU/h, this direct-fired heating system combines electronic spark ignition, thermostatic temperature control, and 1,050 CFM heated-air output to support demanding heating requirements. Its heavy-gauge combustion chamber, durable Tri-Shield™ protective finish, and portable construction support flexible deployment between suitable work areas. The heater is intended for temporary heating where a compatible propane supply, electrical connection, adequate ventilation, and required safety clearances are available.
The L.B. White Tradesman® 400 provides adjustable heating input from 250,000 to 400,000 BTU/h, delivering high-output supplemental heat for suitable construction and industrial environments. Its forced-air system provides a rated heated-air output of 1,050 cubic feet per minute (CFM), helping distribute warmth throughout the intended work area. Variable heat output allows the unit to operate at a lower heating input when full capacity is unnecessary, supporting flexible temperature management and fuel use. Actual heating performance and coverage depend on ambient temperature, building construction, ventilation, air infiltration, and other site conditions.
The L.B. White Tradesman® 400 uses direct-fired forced-air heating technology powered by propane vapor withdrawal. The burner heats the air directly, and the integrated fan distributes the heated airstream into the surrounding area. The manufacturer specifies direct-fired fuel efficiency of 99.97%. Because combustion products enter the heated airstream, adequate ventilation is essential. The heater is intended for temporary construction heating and must not be used to heat human living quarters or in unventilated areas. Operation must comply with the manufacturer's instructions, applicable fuel-gas regulations, and site safety requirements.
The L.B. White Tradesman® 400 provides a rated heated-air output of 1,050 CFM. Its integrated fan circulates warm air toward the intended work area, supporting temporary supplemental heating in suitable construction and industrial environments. The forced-air design helps distribute warmth beyond the immediate burner area. Keep the air intake and discharge openings unobstructed during operation, maintain the manufacturer's specified clearances from combustible materials, and do not attach ductwork to the heater. Proper airflow is essential for safe operation and effective heat distribution.
The L.B. White Tradesman® 400 features a portable, self-contained heater assembly designed for temporary deployment in suitable work areas. Manufacturer-published dimensions are approximately 34.5 inches long, 12.5 inches wide, and 19.5 inches high. The unit requires a compatible propane supply, an approved regulator and gas hose arrangement, and a grounded electrical supply for fan and ignition operation. Its portable construction allows it to be positioned where supplemental heat is needed without permanent HVAC installation. Place the heater on a stable surface, maintain the specified clearances, and follow the manufacturer's instructions for gas connections, electrical supply, startup, and shutdown.
The L.B. White Tradesman® 400 operates on propane vapor withdrawal and has a maximum rated fuel consumption of approximately 18.5 lb/h, with a minimum consumption of approximately 11.6 lb/h at reduced heating output. The provided specifications identify a propane inlet pressure of 5.2 PSIG at the heater connection and a burner manifold pressure of 5.2 PSIG. The variable-output design allows heating input to be reduced when full capacity is not required, helping manage fuel consumption. The unit requires a 120 V, 60 Hz, single-phase electrical supply for fan and ignition operation. Verify the propane supply capacity, regulator, hose and fittings, operating pressure, electrical connection, and heater nameplate before installation. Use only the fuel configuration approved for this model.
The L.B. White Tradesman® 400 incorporates thermostatic temperature control to regulate heating operation according to the selected setting. Electronic spark ignition supports burner startup, while variable-output operation allows the heating input to be adjusted to changing supplemental heating requirements. The integrated fan circulates heated air, and the heater's safety controls help monitor operating conditions. Published electrical specifications identify a 120 V, 60 Hz, single-phase supply, a starting current of 4.0 A, and a continuous operating current of 1.3 A. The motor is rated at approximately 1/5 horsepower. Use a properly grounded electrical receptacle compatible with the factory-installed connection. Confirm the plug configuration, circuit capacity, grounding, and electrical requirements against the current owner's manual and unit nameplate before operation.
The L.B. White Tradesman® 400 is designed for temporary supplemental heating in suitable construction and industrial environments. Its 400,000 BTU/h maximum heating input, 1,050 CFM heated-air output, and variable-output operation support work areas requiring high-capacity temporary heat. The Tradesman series is identified for construction and industrial applications, including temporary heating in buildings undergoing construction, alteration, or repair. Suitability for a specific application depends on the required heating load, available propane infrastructure, ventilation, and applicable safety requirements. Because this is a direct-fired propane heater, it must be operated only in environments permitted by the manufacturer and must not be used in unventilated spaces or human living quarters.
The L.B. White Tradesman® 400 measures approximately 34.5 inches long, 12.5 inches wide, and 19.5 inches high. Its portable construction supports positioning and deployment in suitable temporary-heating locations. The unit can be connected to an approved propane supply and compatible electrical source when supplemental heating is required. Position the heater securely on a stable surface, maintain all specified clearances from combustible materials, and route gas and electrical connections to prevent damage or interference. Disconnect the propane and electrical supplies as directed before moving, inspecting, or servicing the unit. Allow hot components to cool before handling.
The L.B. White Tradesman® 400 incorporates electronic spark ignition, airflow safety protection, and high-temperature safety controls to support controlled operation. Its heavy-gauge combustion chamber and burner plate are designed for demanding work environments, while the Tri-Shield™ protective finish helps resist abrasion and corrosion. The provided product description identifies the Tradesman construction heater series as CSA certified for the United States and Canada. Inspect the heater, electrical cord, propane hose, regulator, and gas fittings before each use. Check gas connections for leaks using an approved leak-detection procedure, provide adequate ventilation, and maintain all specified clearances from combustible materials. Keep the air intake and discharge unobstructed, never bypass safety devices, and do not operate damaged equipment. The heater must not be connected to ductwork. Cleaning, maintenance, and gas-system servicing must follow the current owner's manual and be performed by appropriately qualified personnel.
Warranty coverage for the L.B. White Tradesman® 400 should be confirmed directly with L.B. White or an authorized dealer before purchase. Refer to the applicable written manufacturer warranty for coverage duration, exclusions, registration requirements, and installation, operation, or maintenance conditions applicable to the specific model. Warranty eligibility may depend on compliance with the manufacturer's instructions and the use of approved components and installation procedures.
Experience dependable supplemental heating with the L.B. White Tradesman® 400 Portable Forced-Air Propane Heater. Combining adjustable heating input from 250,000 to 400,000 BTU/h with 1,050 CFM heated-air output, thermostatic temperature control, electronic spark ignition, and durable Tri-Shield™ protection, this portable heater provides high-capacity warmth for suitable construction and industrial applications. Its variable-output heating technology and rugged construction support flexible deployment wherever temporary propane-fired heating is appropriate and the required fuel supply, electrical connection, ventilation, and safety clearances are available.