Your cookie preferences
We use cookies to remember your preferences and understand how shoppers use our site, helping us improve your shopping experience.
Read our privacy policyThe L.B. White Volt® 6 (Model CE6.0) is a 6 kW portable electric fan heater designed to provide supplemental heating and drying for construction sites, workshops, industrial facilities, and other suitable indoor work environments. Delivering up to 20,500 BTU/h of heating output, this forced-air heating system combines stainless steel-jacketed heating coils, an industrial-grade fan, and an integrated ambient thermostat for convenient temperature management without combustion, fuel spills, or fuel odors. Its powder-coated steel housing, sealed motor, and portable construction support deployment in demanding work areas where a compatible 240 V electrical supply is available.
The L.B. White Volt® 6 provides a rated heating output of 6 kW, equivalent to approximately 20,500 BTU/h. Designed for supplemental heating and drying, this portable electric fan heater delivers warmth without combustion-based fuel delivery. Its integrated fan circulates heated air into the surrounding space to support localized heating applications. Actual heating performance and coverage depend on ambient temperature, insulation, room dimensions, air infiltration, and other site conditions.
The L.B. White Volt® 6 uses electric resistance heating elements housed within its inner barrel. Stainless steel-jacketed heating coils transfer heat to air circulated by the integrated industrial-grade fan. Its powder-coated steel housing and high-quality sealed motor support use in suitable work environments. Because the heater operates without combustion, it does not require a fuel tank, gas supply, or combustion exhaust system, making it an option for applications where electric supplemental heating is preferred and the required electrical infrastructure is available.
The L.B. White Volt® 6 provides a rated airflow of 250 cubic feet per minute (CFM). Its integrated fan draws air through the heating elements and distributes warm air into the surrounding work area. This forced-air configuration supports localized heating and drying applications. Keep the air intake and discharge openings unobstructed during operation and maintain the manufacturer's specified clearances to support proper airflow and reduce overheating risks.
The L.B. White Volt® 6 features a compact, self-contained design for portable placement on a stable, level surface. Manufacturer-published dimensions are approximately 19.5 inches long, 11.8 inches wide, and 17.3 inches high, with a unit weight of approximately 32.9 lb and a shipping weight of approximately 40 lb. Its portable construction supports repositioning between suitable work areas without permanent HVAC installation, fuel storage, or fuel piping. Position the heater according to the manufacturer's clearance requirements and connect it only to a compatible electrical supply.
The L.B. White Volt® 6 operates on a 240 V, 60 Hz, single-phase electrical supply and provides a rated heating output of 6 kW. Published electrical specifications include a current draw of 25 A, a 10-foot power cord using 3-conductor 8 AWG cable, and a NEMA 14-30P plug. Connect the heater to a properly grounded, compatible receptacle and verify circuit capacity, grounding, and local electrical requirements before operation. Do not use an extension cord or relocatable power tap unless the manufacturer expressly permits the specific configuration. No separate fuel tank, fuel hose, or fuel connection is required.
The L.B. White Volt® 6 incorporates an ambient thermostat with a published temperature range of 32°F to 100°F (0°C to approximately 40°C). This control helps regulate heating operation according to surrounding temperature. The unit also incorporates overheat protection to help interrupt operation if excessive temperatures occur. Its electrical connection consists of a 240 V, 60 Hz, single-phase supply, a rated current draw of 25 A, a 10-foot, 3-conductor 8 AWG power cord, and a NEMA 14-30P plug. Use a properly grounded receptacle with adequate circuit capacity and follow the manufacturer's instructions for operation, shutdown, and electrical safety.
The L.B. White Volt® 6 is designed for supplemental heating and drying in suitable indoor work environments. The Volt® series is identified for worksite, construction, industrial, and other applications requiring portable electric heat. Its 6 kW heating output, 250 CFM airflow, and combustion-free operation support localized heating where a compatible grounded 240 V electrical supply is available. Confirm the suitability of the heater for the specific environment, electrical installation, and intended drying application before use.
The L.B. White Volt® 6 weighs approximately 32.9 lb and measures approximately 19.5 inches long, 11.8 inches wide, and 17.3 inches high. Its compact design supports portable placement and repositioning between suitable work areas. Position the heater on a stable, level surface and maintain the required clearances from combustible materials. Disconnect the electrical supply before moving, cleaning, or storing the unit, and allow it to cool before handling or servicing.
The L.B. White Volt® 6 incorporates overheat protection designed to help interrupt operation if excessive temperatures occur. Its key design features include an industrial-grade fan, stainless steel-jacketed heating coils, powder-coated steel housing, and a high-quality sealed motor. The Volt® series is identified as UL approved in the provided product description. Keep air intake and discharge openings unobstructed, maintain the specified clearances from combustible materials, and inspect the heater, power cord, and plug before each use. Disconnect electrical power and allow the unit to cool before cleaning or storage. Follow the current owner's manual for maintenance and troubleshooting, and have repairs performed by appropriately qualified personnel. Do not operate the heater with a damaged cord, plug, housing, or other components.
Warranty coverage for the L.B. White Volt® 6 should be confirmed directly with L.B. White or an authorized dealer before purchase. Refer to the applicable written manufacturer warranty for coverage duration, exclusions, registration requirements, and any installation, operation, or maintenance conditions that apply to the specific model. Warranty eligibility may depend on compliance with the manufacturer's instructions.
Experience convenient supplemental heating with the L.B. White Volt® 6 Electric Fan Heater. Combining 6 kW of heating output and 20,500 BTU/h with 250 CFM forced-air circulation, stainless steel-jacketed heating coils, an integrated ambient thermostat, and overheat protection, this portable heater provides combustion-free warmth for suitable commercial, construction, and industrial environments. Its compact construction, 240 V electrical connection, and durable steel housing support flexible deployment wherever supplemental electric heating or drying is required and a compatible grounded electrical supply is available.