LG High-Efficiency Electric Inverter Heat Pump Water Heater | 80 Gallon | 94 FHR | 3.90 UEF | Water Leak Detection | APHWC801L

High-Efficiency Inverter Heat Pump Water Heating with Smart Demand Response & Leak Detection

Upgrade your home’s hot water system with the LG 80-Gallon High-Efficiency Inverter Electric Heat Pump Water Heater (Model APHWC801L), engineered to deliver continuous hot water comfort, smart grid integration, and advanced home leak protection. Powered by a variable-speed Inverter Twin Rotary Compressor and dual back-up heating elements, this high-capacity unit achieves an extraordinary Uniform Energy Factor of 3.9 UEF (qualifying under NEEA Tier 4 standards), reducing annual electrical energy consumption to just 1,272 kWh/year. Designed in a sleek square-shaped silver cabinet, the APHWC801L provides a 72-gallon rated storage volume and an impressive First Hour Rating (FHR) of 94 gallons, making it the ideal solution for high-demand residential households.

Built for complete peace of mind, this Demand Response Ready model features a built-in EcoPort® (CTA-2045 port) for utility smart-grid connectivity and includes a field-installable water leak detection sensor. Combined with whisper-quiet operation as low as 42 dBA in Auto mode and integrated LG ThinQ™ Wi-Fi smart controls, the APHWC801L offers a highly efficient and intelligent approach to residential water heating.

Key Benefits

• Ultra-High Efficiency (3.9 UEF) – Features advanced inverter compressor technology qualifying under NEEA Tier 4 standards, consuming only 1,272 kWh/year.
• Demand Response Ready with Built-In EcoPort® – Equipped with an integrated CTA-2045 EcoPort® port to support utility load-management programs and Time-of-Use (TOU) rate optimization.
• Included Water Leak Detection Sensor – Comes with a field-installable water leak detection sensor to detect moisture early and help safeguard your home against potential water damage.
• High-Capacity Hot Water Delivery – Features an 80-gallon nominal capacity (72-gal rated storage volume) with an extraordinary 94-gallon First Hour Rating (FHR) and a recovery rate of 22.7 GPH at a 90°F rise.
• Inverter Twin Rotary Compressor – Modulates compressor output continuously with an Electronic Expansion Valve (EEV) for optimal performance across varying ambient temperatures.
• Dual Heating Sources with Redundancy – Combines the heat pump module with dual 5 kW back-up electric heating elements, allowing continuous operation even if a single component requires service.
• Built-In LG ThinQ™ Wi-Fi Smart Controls – Remotely manage operation modes, adjust target water temperatures, set daily schedules, monitor hot water temperature, and track Time of Use settings via the LG ThinQ app.
• Whisper-Quiet Operation – Operates at an ultra-quiet 42 dBA in Auto mode and 45 dBA in Turbo mode, preserving a peaceful home environment.
• Corrosion-Resistant Tank Construction – Protected by heavy-duty foam insulation (1.6 to 2.4 in.), an internal enamel tank coating, and a protective anode rod to ensure long water tank service life.
• Wide Ambient Operating Range – Operates in heat pump mode across outdoor/ambient air temperatures ranging from 23°F to 120°F.

Designed for High-Demand Residential Applications

With an 80-gallon nominal capacity and a First Hour Rating of 94 gallons, the LG APHWC801L effortlessly satisfies the high-demand hot water needs of large families and multi-bath homes. An integrated water temperature sensor continuously tracks water draw to automatically optimize heating cycles and maximize energy savings.

Inverter Technology with Dual Heat Sources

Unlike standard single-speed heat pumps, LG’s variable-speed Twin Rotary compressor dynamically scales its speed to match real-time heating demands. For high-demand recovery periods, two independent 5 kW upper and lower electric heating elements operate alongside or in place of the heat pump, guaranteeing reliable hot water delivery in any situation.

Intelligent LG ThinQ™ Smart Controls

The unit features an intuitive front-panel digital display with 4-button navigation (Mode, Set, Up, Down). Built-in LG ThinQ™ Wi-Fi connectivity gives homeowners full control to customize settings and switch between modes from anywhere:

• Auto Mode – Intelligently balances heat pump and element usage for optimal energy efficiency and rapid comfort.
• Heat Pump Mode – Maximizes energy savings by utilizing only the inverter heat pump for water heating.
• Turbo Mode – Activates both the heat pump and electric heating elements simultaneously for maximum hot water recovery.
• Vacation Mode – Lowers water setpoints during extended trips to reduce energy consumption.

Built for Quiet, Long-Lasting Durability

An advanced brushless DC fan motor and custom propeller design deliver smooth airflow while maintaining whisper-quiet sound levels between 42 dBA and 45 dBA. Thick 1.6 to 2.4-inch foam insulation minimizes standby heat loss, while side-located 3/4" NPT water connections streamline plumbing installation.

Warranty

The LG APHWC801L Heat Pump Water Heater is backed by LG’s comprehensive residential warranty program, offering trusted quality and support from a global leader in HVAC and appliance engineering.

What’s Included

• LG 80-Gallon Inverter Electric Heat Pump Water Heater (APHWC801L)
• Field-Installable Water Leak Detection Sensor
• Pre-Installed Primary Anode Rod
• Temperature & Pressure (T&P) Relief Valve (3/4" NPT, 210°F)
• Drain Valve (3/4" NPT)
• Owner's Manual & Installation Guide

Requirements & Considerations

• Electrical Requirements – Requires a dedicated 208-240V / 60 Hz / 1-Phase power supply with a Minimum Circuit Ampacity (MCA) of 30.0A and Maximum Overcurrent Protection (MOP) of 30.0A breaker size.
• Upper & Lower Heating Elements – Rated at 3.8 kW @ 208V or 5.0 kW @ 240V.
• Water Connections – Side-mounted 3/4" NPT inlet and outlet pipe thread connections.
• Drain Hose Connection – Accommodates 3/4" or 1/2" NPT condensate drain line connection.
• Working Pressure Ratings – Maximum working water tank pressure of 150 psi; design system pressure of 290 psi (High Side) / 130.5 psi (Low Side).
• Dimensions & Clearance – Net unit dimensions measure 22-27/32" W x 79-1/16" H x 22-29/32" D. Ensure adequate room volume or optional duct adapter (PHDCLA0) installation for proper airflow.
• Automatic Water Shut-Off Valve – The water leak detection sensor is included, but an automatic shut-off valve is NOT included and must be field-supplied if auto-shutoff functionality is required.