1-800-397-1392
Today's Hours 8am - 9pm est
The Mitsubishi Dual Zone Mini Split Systems are state of the art ductless mini split heat pump systems, providing both heating and cooling for your home. Rated at 20 SEER, with an inverter-driven compressor, this efficient system will keep operating costs down while providing year-round comfort. Each living space has its own air-handling unit and each unit has its own wireless electronic temperature controller.
The Mitsubishi Series MSZ-FH mini-split wall mounted air handlers are a perfect fit for your home. With multiple operating modes, multiple fan speeds, and multiple airflow directions, this unit fits the needs of nearly any room.
The MSZ-FH's i-see Sensor 3D monitors the floor and ceiling of its zone for fluctuations in temperature. If it detects an underserved area and will temporarily adjust airflow to ensure complete comfort throughout the zone. This sensor also serves as an occupancy detector, allowing the indoor unit to enter energy saving mode if no human heat signatures are detected within the zone.
The MSZ-FH series uses two advanced filters to clean and deodorize the air that passes through it. The deodorizing filter utilizes a ceramic surface element and platinum nanoparticles to absorb any offending smells. The second filter is an enzyme-based anti-allergy filter that captures and destroys bacteria and particulates.
Mitsubishi's hot start technology prevents cold drafts by delaying fan operation until the heat exchanger has warmed up.
The powerful setting on the Mitsubishi MSZ-FH series makes it easy to get your zone to the perfect temperature quickly. When it is activated, the unit temporarily increases refrigerant flow and fan speed to provide quick comfort through rapid heating or cooling.
By slowly adjusting the cooling set point and swinging the horizontal vanes, the MSZFH06NA can improve the efficiency of cooling operations without compromising the comfort provided.
When the indoor unit is run in dry mode, the coil's temperature stays just below the dew point of the return air, removing unwanted moisture. This improves your comfort and reduces the chance of mold growth and other property damage in the conditioned space.
Optimal air flow is easy to achieve with the MSZFH06NA thanks to two vane control options, standard and wide. These functions provide access to five different horizontal vane positions, six different vertical vane positions, two swing modes, a horizontal vane auto mode, and a vertical vane wide mode. Auto mode selects the best vane position based on operating mode and the swing modes cycle through all positions for maximum coverage. When wide mode is activated, fan speed increases beyond the current setting.
The Mitsubishi Ductless Mini Split MXZ Series Heat Pump and Air Conditioner Condenser has an INVERTER-driven compressor pump that cools or warms refrigerant and sends it inside to an air handler through small pipes. Each living space has its own air-handling unit and each unit has its own wireless electronic temperature controller.
With the Mitsubishi Ductless Mini Split MXZ Series Heat Pump Air Conditioner Multi zone condenser each room or zone operates independently with its own wireless or wired remote controller so people in different rooms can choose the temperature that makes them most comfortable. This unit will work with a variety of indoor unit combinations; with indoor options such as Wall mounted ductless, Floor mounted ductless, Ceiling recessed cassette ductless, horizontal ducted ductless or even multi position ducted air handlers.
Please note that in order to function, this air handler must be installed with a condenser and other installation equipment, available at an additional cost.
The Mitsubishi MSZ-FS09NA air handler is designed to be able to function as a single zone system or with a multi zone system setup. With integrated I-SEE sensor technology, this air handler can constantly read the temperature from multiple directions in the room, allowing it to aim airflow in the direction that it is needed most. This allows your room to maintain a more constant temperature and decreases the unit’s run time. Keeping health in mind, Mitsubishi also factory-installed an enhanced filtration system.
Please note that in order to function, this air handler must be installed with a condenser and other installation equipment, available at an additional cost.
The Mitsubishi MSZ-FS18NA air handler is designed to be able to function as a single zone system or with a multi zone system setup. With integrated I-SEE sensor technology, this air handler can constantly read the temperature from multiple directions in the room, allowing it to aim airflow in the direction that it is needed most. This allows your room to maintain a more constant temperature and decreases the unit’s run time. Keeping health in mind, Mitsubishi also factory-installed an enhanced filtration system.
Provides simple and secure mounting for small and large piping systems, ductwork runs, cable trays and smaller equipment such as condensers. Linear track offers adjustable mounting. Manufactured from exterior grade materials.
E Lite Condenser Pad is designed to provide solid support for air conditioning condensers. It's made from sturdy polypropylene, striking a balance between lightness and stability. Its robust design ensures a level ground without the need for extra components.
E Lite Risers complement the Condenser Pad, allowing you to adjust your setup as needed. They are constructed from weather-resistant PVC for outdoor use.
E Lite Condenser Pad and Risers offer reliable support without any complications. They are built to last and deliver efficient performance. Consider E Lite for your support needs – it's a practical solution for your projects.
9,000 BTU Wall Mounted Mitsubishi Mini-Split Multi Zone FS Series - Air Handler | |
---|---|
SKU | MSZ-FS09NA |
Weight (in lbs) | 29.000000 |
Brand/Manufacturer | Mitsubishi |
Controller | Wireless Included |
Additional Information | Drain: 5/8" |
Cooling BTU | 9,000 |
Heating BTU | 10,900 |
Maximum CFM | 117-381 CFM |
Decibel Level (dBA) | 20-42 |
Refrigerant | R410A |
Capacity | Dehumidification Rate: 0.23 gal/hr |
Liquid Line | 1/4" |
Suction Line | 3/8" |
Electrical | 208/230V 1 Phase 60 Hz |
BTU/Tonnage | 9,000 BTU/0.75 Ton |
Mini-Split Type | Wall Mounted |
Zone Compatibility | Multi Zone |
Operating Mode | Cooling, Heating |
Height | 12-11/16" |
Width | 36-7/16" |
Depth | 9-3/16" |
Warranty | 10 Years with Online Registration |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
Safety Information | PROPOSITION 65 WARNING |
18,000 BTU Wall Mounted Mitsubishi Mini-Split Multi Zone FS Series - Air Handler | |
SKU | MSZ-FS18NA |
Weight (in lbs) | 29.000000 |
Brand/Manufacturer | Mitsubishi |
Controller | Wireless Included |
Additional Information | Drain: 5/8" |
Cooling BTU | 17,200 |
Heating BTU | 20,300 |
Maximum CFM | 194-514 CFM |
Decibel Level (dBA) | 25-47 |
Refrigerant | R410A |
Capacity | Dehumidification Rate: 0.32 gal/hr |
Liquid Line | 1/4" |
Suction Line | 1/2" |
Electrical | 208/230V 1 Phase 60 Hz |
Phase | Single Phase |
BTU/Tonnage | 18,000 BTU/1.5 Ton |
Mini-Split Type | Wall Mounted |
Zone Compatibility | Multi Zone |
Operating Mode | Cooling, Heating |
Height | 12-11/16" |
Width | 36-7/16" |
Depth | 9-3/16" |
Warranty | 10 Years with Online Registration |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
Safety Information | PROPOSITION 65 WARNING |
Condenser Risers - 4" x 18" - 2 Pack | |
SKU | 87762 |
Weight (in lbs) | 397.000000 |
Brand/Manufacturer | Online Supply |
Diversitech E Lite Equipment Pad and Risers Kit 18" x 38" x 3" | |
SKU | 87762 / EL1838-3 |
Weight (in lbs) | 25.000000 |
Brand/Manufacturer | Online Supply |
Height | 3" |
Width | 18" |
Depth | 38" |
Safety Information | PROPOSITION 65 WARNING |