36,000 BTU 19.1 SEER Mitsubishi Quad Zone H2i Hyper Heat Pump System 6+6+9+15

By

Mitsubishi

Out of stock

Model

MXZ-SM36NAMHZ / 2-MSZ-FS06 / MSZ-FS09 / MSZ-FS15

ID

7865

Rating:
99% of 100
In Stock - 24 Ready to Ship
Mitsubishi

Authorized Mitsubishi Dealer

Description

The Mitsubishi Quad Zone Mini Split Systems are state of the art ductless mini split heat pump systems, providing both heating and cooling for your home. Rated at 19 SEER, with an inverter-driven compressor, this efficient system will keep operating costs down while providing year-round comfort. Each living space has its own air-handling unit and each unit has its own wireless electronic temperature controller.

Indoor Units

The Mitsubishi Series MSZ-FH mini-split wall mounted air handlers are a perfect fit for your home. With multiple operating modes, multiple fan speeds, and multiple airflow directions, this unit fits the needs of nearly any room.

The MSZ-FH's i-see Sensor 3D monitors the floor and ceiling of its zone for fluctuations in temperature. If it detects an underserved area and will temporarily adjust airflow to ensure complete comfort throughout the zone. This sensor also serves as an occupancy detector, allowing the indoor unit to enter energy saving mode if no human heat signatures are detected within the zone.

The MSZ-FH series uses two advanced filters to clean and deodorize the air that passes through it. The deodorizing filter utilizes a ceramic surface element and platinum nanoparticles to absorb any offending smells. The second filter is an enzyme-based anti-allergy filter that captures and destroys bacteria and particulates.

Mitsubishi's hot start technology prevents cold drafts by delaying fan operation until the heat exchanger has warmed up.

The powerful setting on the Mitsubishi MSZ-FH series makes it easy to get your zone to the perfect temperature quickly. When it is activated, the unit temporarily increases refrigerant flow and fan speed to provide quick comfort through rapid heating or cooling.

By slowly adjusting the cooling set point and swinging the horizontal vanes, the MSZFH06NA can improve the efficiency of cooling operations without compromising the comfort provided.

When the indoor unit is run in dry mode, the coil's temperature stays just below the dew point of the return air, removing unwanted moisture. This improves your comfort and reduces the chance of mold growth and other property damage in the conditioned space.

Optimal air flow is easy to achieve with the MSZFH06NA thanks to two vane control options, standard and wide. These functions provide access to five different horizontal vane positions, six different vertical vane positions, two swing modes, a horizontal vane auto mode, and a vertical vane wide mode. Auto mode selects the best vane position based on operating mode and the swing modes cycle through all positions for maximum coverage. When wide mode is activated, fan speed increases beyond the current setting.

Outdoor Unit

The Mitsubishi Ductless Mini Split MXZ Series Heat Pump and Air Conditioner Condenser has an INVERTER-driven compressor pump that cools or warms refrigerant and sends it inside to an air handler through small pipes. Each living space has its own air-handling unit and each unit has its own wireless electronic temperature controller.

With the Mitsubishi Ductless Mini Split MXZ Series Heat Pump Air Conditioner Multi zone condenser each room or zone operates independently with its own wireless or wired remote controller so people in different rooms can choose the temperature that makes them most comfortable. This unit will work with a variety of indoor unit combinations; with indoor options such as Wall mounted ductless, Floor mounted ductless, Ceiling recessed cassette ductless, horizontal ducted ductless or even multi position ducted air handlers.

Buy more Mitsubishi quad zone mini split systems

6,000 BTU Wall Mounted Mitsubishi Mini Split Multi Zone FS Series - Air Handler

Please note that in order to function, this air handler must be installed with a condenser and other installation equipment, available at an additional cost.

  • Able to cover up to a small room in ideal conditions
  • 6,000 BTU wall-mounted air handler with remote
  • Built-in I-SEE sensor to direct airflow more effectively
  • .225 gallon per hour dehumidification rate

The Mitsubishi MSZ-FS06NA air handler is designed to be able to function as a single zone system or with a multi zone system setup. With integrated I-SEE sensor technology, this air handler can constantly read the temperature from multiple directions in the room, allowing it to aim airflow in the direction that it is needed most. This allows your room to maintain a more constant temperature and decreases the unit’s run time.Keeping health in mind, Mitsubishi also factory-installed an enhanced filtration system.

9,000 BTU Wall Mounted Mitsubishi Mini Split Multi Zone FS Series - Air Handler

Please note that in order to function, this air handler must be installed with a condenser and other installation equipment, available at an additional cost.

  • Able to cover up to a small room in ideal conditions
  • 9,000 BTU wall-mounted air handler with remote
  • Built-in I-SEE sensor to direct airflow more effectively
  • .225 gallon per hour dehumidification rate

The Mitsubishi MSZ-FS09NA air handler is designed to be able to function as a single zone system or with a multi zone system setup. With integrated I-SEE sensor technology, this air handler can constantly read the temperature from multiple directions in the room, allowing it to aim airflow in the direction that it is needed most. This allows your room to maintain a more constant temperature and decreases the unit’s run time. Keeping health in mind, Mitsubishi also factory-installed an enhanced filtration system.

15,000 BTU Wall Mounted Mitsubishi Mini Split Multi Zone FS Series - Air Handler

Please note that in order to function, this air handler must be installed with a condenser and other installation equipment, available at an additional cost.

  • Able to cover up to a medium-sized room in ideal conditions
  • 15,000 BTU wall-mounted air handler with remote
  • Built-in I-SEE sensor to direct airflow more effectively
  • .405 gallon per hour dehumidification rate

The Mitsubishi MSZ-FS15NA air handler is designed to be able to function as a single zone system or with a multi zone system setup. With integrated I-SEE sensor technology, this air handler can constantly read the temperature from multiple directions in the room, allowing it to aim airflow in the direction that it is needed most. This allows your room to maintain a more constant temperature and decreases the unit’s run time. Keeping health in mind, Mitsubishi also factory-installed an enhanced filtration system.

Product Specifications

More Information
36,000 BTU 23 SEER Mitsubishi Multi-Zone Ductless H2i Hyper Heat Pump Condenser w/ Base Pan Heater
SKUMXZ-SM36NAMHZ
Weight275.000000
ManufacturerMitsubishi
ReplacesMXZ-SM36NAMHZ
Product FeaturesLow Ambient Heating
HSPF11
Cooling BTU36,000
Heating BTU33,000
Decibel Level (dBA)49
RefrigerantR410A
SEER23
EER15
Liquid Line3/8"
Suction Line5/8"
Electrical230 V. 1 Phase 60 Hz
Max Breaker Size45 amps
Min. Breaker Size40 amps
Amperage Requirement50
Tonnage3 Ton
BTU/Tonnage36,000 BTU/3 Ton
Zone CompatibilityMulti Zone
Height52"
Width41"
Depth16"
WarrantyLimited warranty: five years parts and seven years compressors
Resources You will need Adobe® Acrobat® Reader to view PDF documents
Safety InformationPROPOSITION 65 WARNING
6,000 BTU Wall Mounted Mitsubishi Mini Split Multi Zone FS Series - Air Handler
SKUMSZ-FS06NA
Weight29.000000
ManufacturerMitsubishi
ControllerWireless Included
Additional InformationDrain: 5/8"
Cooling BTU6,000
Heating BTU8,700
Maximum CFMC: 137-381 & H: 140-437
Decibel Level (dBA)C: 20-40& H: 20-42
RefrigerantR410A
CapacityDehumidification Rate: 0.23 gal/hr
Liquid Line1/4"
Suction Line3/8"
Electrical208/230V 1 Phase 60 Hz
Electric Phase FilterSingle Phase
BTU/Tonnage6,000 BTU/0.5 Ton
Mini Split TypeWall Mounted
Zone CompatibilityMulti Zone
Operating ModeCooling, Heating
Height12-11/16"
Width36-7/16"
Depth9-3/16"
Warranty10 Years with Online Registration
Resources You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING
9,000 BTU Wall Mounted Mitsubishi Mini Split Multi Zone FS Series - Air Handler
SKUMSZ-FS09NA
Weight29.000000
ManufacturerMitsubishi
ControllerWireless Included
Additional InformationDrain: 5/8"
Cooling BTU9,000
Heating BTU9,600
Maximum CFMC: 137-381 & H: 140-437
Decibel Level (dBA)C: 20-40& H: 20-42
RefrigerantR410A
CapacityDehumidification Rate: 0.23 gal/hr
Liquid Line1/4"
Suction Line3/8"
Electrical208/230V 1 Phase 60 Hz
BTU/Tonnage9,000 BTU/0.75 Ton
Mini Split TypeWall Mounted
Zone CompatibilityMulti Zone
Operating ModeCooling, Heating
Height12-11/16"
Width36-7/16"
Depth9-3/16"
Warranty10 Years with Online Registration
Resources You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING
15,000 BTU Wall Mounted Mitsubishi Mini Split Multi Zone FS Series - Air Handler
SKUMSZ-FS15NA
Weight29.000000
ManufacturerMitsubishi
ControllerWireless Included
Additional InformationDrain: 5/8"
Cooling BTU15,000
Heating BTU18,000
Maximum CFM194-497 CFM
Decibel Level (dBA)25-46
RefrigerantR410A
CapacityDehumidification Rate: 0.41 gal/hr
Liquid Line1/4"
Suction Line1/2"
Electrical208/230V 1 Phase 60 Hz
Electric Phase FilterSingle Phase
BTU/Tonnage15,000 BTU/1.25 Ton
Mini Split TypeWall Mounted
Zone CompatibilityMulti Zone
Operating ModeCooling, Heating
Height12-11/16"
Width36-7/16"
Depth9-3/16"
Warranty10 Years with Online Registration
Resources You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING
Read More +

Reviews 6

Write Your Own Review
You're reviewing:36,000 BTU 19.1 SEER Mitsubishi Quad Zone H2i Hyper Heat Pump System 6+6+9+15
Your Rating

Questions and Answers

Customer Questions
No Questions
Did you find what you were looking for?
Why Choose Mitsubishi Mini Splits?
Why Choose Mitsubishi Mini Splits?

Mitsubishi mini split air conditioners and heat pumps provide exceptional comfort, energy efficiency, and ultra-quiet performance in any climate. Engineered for reliability and precision, these systems offer year-round heating and cooling while reducing energy costs and enhancing indoor air quality.