Customer Reviews
0% Financing for 24 Months* Available - Buy Now and Pay later!

36,000 BTU 19.2 SEER Mitsubishi Tri Zone Mini Split Heat Pump System 9+12+15

By

Mitsubishi

In stock

Model

MXZ-4C36NA2 / MSZ-FH09 / MSZ-FH12 / MSZ-FH15

ID

7676

Rating:
99% of 100
Availability: Ships in 3-4 Weeks

Authorized Mitsubishi Dealer

Suggested Retail $6,811.86
Your Low Price $5,506.00
 

Please enter your room sizes to narrow your results

Room #1

Room #2

Room #3

Free Shipping

Required Fields *

Customize 36,000 BTU 19.2 SEER Mitsubishi Tri Zone Mini Split Heat Pump System 9+12+15
36,000 BTU Mult Zone Condenser
36,000 BTU Mult Zone Condenser   + $3,169.00
9,000 BTU Wall Mounted Mitsubishi Mini-Split Multi Zone FS Series - Air Handler
9,000 BTU Wall Mounted Mitsubishi Mini-Split Multi Zone FS Series - Air Handler   + $659.00
12,000 BTU Wall Mounted Mitsubishi Mini-Split Multi Zone FS Series - Air Handler
12,000 BTU Wall Mounted Mitsubishi Mini-Split Multi Zone FS Series - Air Handler   + $779.00
15,000 BTU Wall Mounted Mitsubishi Mini-Split Multi Zone FS Series - Air Handler
15,000 BTU Wall Mounted Mitsubishi Mini-Split Multi Zone FS Series - Air Handler   + $899.00
Condenser Risers - 4" x 18" - 2 Pack
36,000 BTU 19.2 SEER Mitsubishi Tri Zone  Heat Pump System 9+12+15

$5,506.00

Accessories for this product
Call 1-800-397-1392 for Best Pricing
Customer Reviews
BBB Rating
Best Pricing

Description

The Mitsubishi Tri Zone Mini Split Systems are state of the art ductless mini split heat pump systems, providing both heating and cooling for your home. Rated at 19 SEER, with an inverter-driven compressor, this efficient system will keep operating costs down while providing year-round comfort. Each living space has its own air-handling unit and each unit has its own wireless electronic temperature controller.

Indoor Units

The Mitsubishi Series MSZ-FH mini-split wall mounted air handlers are a perfect fit for your home. With multiple operating modes, multiple fan speeds, and multiple airflow directions, this unit fits the needs of nearly any room.

The MSZ-FH's i-see Sensor 3D monitors the floor and ceiling of its zone for fluctuations in temperature. If it detects an underserved area and will temporarily adjust airflow to ensure complete comfort throughout the zone. This sensor also serves as an occupancy detector, allowing the indoor unit to enter energy saving mode if no human heat signatures are detected within the zone.

The MSZ-FH series uses two advanced filters to clean and deodorize the air that passes through it. The deodorizing filter utilizes a ceramic surface element and platinum nanoparticles to absorb any offending smells. The second filter is an enzyme-based anti-allergy filter that captures and destroys bacteria and particulates.

Mitsubishi's hot start technology prevents cold drafts by delaying fan operation until the heat exchanger has warmed up.

The powerful setting on the Mitsubishi MSZ-FH series makes it easy to get your zone to the perfect temperature quickly. When it is activated, the unit temporarily increases refrigerant flow and fan speed to provide quick comfort through rapid heating or cooling.

By slowly adjusting the cooling set point and swinging the horizontal vanes, the MSZFH06NA can improve the efficiency of cooling operations without compromising the comfort provided.

When the indoor unit is run in dry mode, the coil's temperature stays just below the dew point of the return air, removing unwanted moisture. This improves your comfort and reduces the chance of mold growth and other property damage in the conditioned space.

Optimal air flow is easy to achieve with the MSZFH06NA thanks to two vane control options, standard and wide. These functions provide access to five different horizontal vane positions, six different vertical vane positions, two swing modes, a horizontal vane auto mode, and a vertical vane wide mode. Auto mode selects the best vane position based on operating mode and the swing modes cycle through all positions for maximum coverage. When wide mode is activated, fan speed increases beyond the current setting.

Outdoor Unit

The Mitsubishi Ductless Mini Split MXZ Series Heat Pump and Air Conditioner Condenser has an INVERTER-driven compressor pump that cools or warms refrigerant and sends it inside to an air handler through small pipes. Each living space has its own air-handling unit and each unit has its own wireless electronic temperature controller.

With the Mitsubishi Ductless Mini Split MXZ Series Heat Pump Air Conditioner Multi zone condenser each room or zone operates independently with its own wireless or wired remote controller so people in different rooms can choose the temperature that makes them most comfortable. This unit will work with a variety of indoor unit combinations; with indoor options such as Wall mounted ductless, Floor mounted ductless, Ceiling recessed cassette ductless, horizontal ducted ductless or even multi position ducted air handlers.

Get more Mitsubhishi Items!

36,000 BTU Ductless Mitsubishi Mini-Split Multi Zone MXZ-C Series - Heat Pump Condenser

OVERVIEW

The Mitsubishi MXZ-4C36NA2 is a heat pump condenser designed to be used in multi zone system setups. As one air handler is needed per room that you are trying to heat and cool, multiple single zone condensers can take up a lot of space in your yard, making a multi zone unit more practical in many applications.

FEATURES

  • 36,000 BTU multi zone heat pump condenser
  • Variable speed Inverter-driven compressor
  • Quiet operation
  • Supports enhanced comfort down to -13°F
36,000 BTU

The Mitsubishi MXZ-4C36NA2 is rated at 36,000 BTU, which generally should be the same or greater than the total BTU count across all air handlers that this unit is paired with. In some instances, a certified pairing will have a higher BTU count total than this condenser’s rating. This is intentional, as the condenser can easily handle more, however anything higher than this rating can potentially lower the speed that the unit can heat and cool, as well as limit the functional outputs of each air handler if they are all running at the same time.
Please note that in order to function, this heat pump condenser must be installed with compatible air handlers, controllers, and other installation equipment, available at an additional cost

Warranty

Mitsubishi offers a 5 year parts and 7 year compressor warranty on all of its products. When the unit is registered online through the manufacturer after an installation that follows your state and local codes, the warranty is upgraded to a 10 year parts and compressor warranty.

Enhanced Comfort

With its variable speed compressor, the MXZ-4C36NA2 can provide more precise adjustments to the covered spaces with the right air handlers. This also slightly improves electrical efficiency by ramping the compressor up and down based on the unit’s air handlers’ needs, as well as providing a more stable temperature output from the connected air handlers to provide superior comfort.

Intelligent Control

For ease of control, many air handlers that are compatible with the MXZ-4C36NA2 can use any Mitsubishi-brand thermostat or adapter. The most convenient to control— the Kumo cloud WiFi adapter, found here—allows each air handler to be accessed from anywhere that you have Internet. Please note that in most applications, you will need one thermostat or adapter per indoor air handler that you want to be able to control with it.

9,000 BTU Wall Mounted Mitsubishi Mini-Split Multi Zone FS Series - Air Handler

Please note that in order to function, this air handler must be installed with a condenser and other installation equipment, available at an additional cost.

  • Able to cover up to a small room in ideal conditions
  • 9,000 BTU wall-mounted air handler with remote
  • Built-in I-SEE sensor to direct airflow more effectively
  • .225 gallon per hour dehumidification rate

The Mitsubishi MSZ-FS09NA air handler is designed to be able to function as a single zone system or with a multi zone system setup. With integrated I-SEE sensor technology, this air handler can constantly read the temperature from multiple directions in the room, allowing it to aim airflow in the direction that it is needed most. This allows your room to maintain a more constant temperature and decreases the unit’s run time. Keeping health in mind, Mitsubishi also factory-installed an enhanced filtration system.

12,000 BTU Wall Mounted Mitsubishi Mini-Split Multi Zone FS Series - Air Handler

Please note that in order to function, this air handler must be installed with a condenser and other installation equipment, available at an additional cost.

  • Able to cover up to a small room in ideal conditions
  • 12,000 BTU wall-mounted air handler with remote
  • Built-in I-SEE sensor to direct airflow more effectively
  • .375 gallon per hour dehumidification rate

The Mitsubishi MSZ-FS12NA air handler is designed to be able to function as a single zone system or with a multi zone system setup. With integrated I-SEE sensor technology, this air handler can constantly read the temperature from multiple directions in the room, allowing it to aim airflow in the direction that it is needed most. This allows your room to maintain a more constant temperature and decreases the unit’s run time. Keeping health in mind, Mitsubishi also factory-installed an enhanced filtration system.

15,000 BTU Wall Mounted Mitsubishi Mini-Split Multi Zone FS Series - Air Handler

Please note that in order to function, this air handler must be installed with a condenser and other installation equipment, available at an additional cost.

  • Able to cover up to a medium-sized room in ideal conditions
  • 15,000 BTU wall-mounted air handler with remote
  • Built-in I-SEE sensor to direct airflow more effectively
  • .405 gallon per hour dehumidification rate

The Mitsubishi MSZ-FS15NA air handler is designed to be able to function as a single zone system or with a multi zone system setup. With integrated I-SEE sensor technology, this air handler can constantly read the temperature from multiple directions in the room, allowing it to aim airflow in the direction that it is needed most. This allows your room to maintain a more constant temperature and decreases the unit’s run time. Keeping health in mind, Mitsubishi also factory-installed an enhanced filtration system.

Condenser Risers - 4" x 18" - 2 Pack

Provides simple and secure mounting for small and large piping systems, ductwork runs, cable trays and smaller equipment such as condensers. Linear track offers adjustable mounting. Manufactured from exterior grade materials.

Features

  • Ideal for piping, duct runs, cable trays and condensers
  • Weather resistant PVC
  • Linear track holds 3/8" hex head bolts
  • Two 7/8" long bolts included
  • Weighs up to 397 Ib
E Lite Equipment Pad and Risers Kit 18" x 38" x 3"

E Lite Condenser Pad and Risers

E Lite Condenser Pad

E Lite Condenser Pad is designed to provide solid support for air conditioning condensers. It's made from sturdy polypropylene, striking a balance between lightness and stability. Its robust design ensures a level ground without the need for extra components.

Key Features:

  • Reliable Support: Abundance of ridges for stable ground support.
  • Durable and Lightweight: Tough yet not excessively heavy, thanks to polypropylene construction.
  • Anti-Slip: The surface prevents slipping, and rounded edges enhance safety.
  • Simple Appearance: Gray color with size labels.
  • Versatile Use: Suitable for condensers, pipes, ducts, cables, and more.

E Lite Risers

E Lite Risers complement the Condenser Pad, allowing you to adjust your setup as needed. They are constructed from weather-resistant PVC for outdoor use.

Key Features:

  • Weather Resistance: Made from tough PVC for long-lasting performance.
  • Secure Setup: The track securely holds bolts in place.
  • Bolts Included: Each set comes with two bolts.
  • Strong Support: Capable of handling loads of up to 397 pounds.

E Lite Condenser Pad and Risers offer reliable support without any complications. They are built to last and deliver efficient performance. Consider E Lite for your support needs – it's a practical solution for your projects.

Product Specifications

More Information
36,000 BTU Ductless Mitsubishi Mini-Split Multi Zone MXZ-C Series - Heat Pump Condenser
SKUMXZ-4C36NA3
Weight (in lbs)271.000000
Brand/ManufacturerMitsubishi
Additional InformationHeat Pump
Additional InformationMaximum Line Set Length: 82'
Additional InformationMaximum System Line Length: 492'
HSPF11
Cooling BTU36,000
Heating BTU42,000
Decibel Level (dBA)56
Energy StarNo
RefrigerantR410A
SEER1 (Efficiency)19
EER15
Liquid Line1/4"
Suction Line1/2" (1) 3/8" (3)
Electrical208/230V 1 Phase 60 Hz
PhaseSingle Phase
Max Breaker Size40
Min. Breaker Size30
Tonnage3 Ton
BTU/Tonnage36,000 BTU/3 Ton
Min/Max Outdoor Temp for Heating5°-65°
Min/Max Outdoor Temp for Cooling14°-115°
Zone CompatibilityMulti Zone
Operating ModeCooling, Heating
Height31"
Width37"
Depth13"
Warranty10 Years with Online Registration
Resources You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING
9,000 BTU Wall Mounted Mitsubishi Mini-Split Multi Zone FS Series - Air Handler
SKUMSZ-FS09NA
Weight (in lbs)29.000000
Brand/ManufacturerMitsubishi
ControllerWireless Included
Additional InformationDrain: 5/8"
Cooling BTU9,000
Heating BTU10,900
Maximum CFM117-381 CFM
Decibel Level (dBA)20-42
RefrigerantR410A
CapacityDehumidification Rate: 0.23 gal/hr
Liquid Line1/4"
Suction Line3/8"
Electrical208/230V 1 Phase 60 Hz
BTU/Tonnage9,000 BTU/0.75 Ton
Mini-Split TypeWall Mounted
Zone CompatibilityMulti Zone
Operating ModeCooling, Heating
Height12-11/16"
Width36-7/16"
Depth9-3/16"
Warranty10 Years with Online Registration
Resources You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING
12,000 BTU Wall Mounted Mitsubishi Mini-Split Multi Zone FS Series - Air Handler
SKUMSZ-FS12NA
Weight (in lbs)29.000000
Brand/ManufacturerMitsubishi
ControllerWireless Included
Additional InformationDrain: 5/8"
Cooling BTU12,000
Heating BTU13,600
Maximum CFM117-398 CFM
Decibel Level (dBA)21-42
RefrigerantR410A
CapacityDehumidification Rate: 0.38 gal/hr
Liquid Line1/4"
Suction Line3/8"
Electrical208/230V 1 Phase 60 Hz
PhaseSingle Phase
BTU/Tonnage12,000 BTU/1 Ton
Mini-Split TypeWall Mounted
Zone CompatibilityMulti Zone
Operating ModeCooling, Heating
Height12-11/16"
Width36-7/16"
Depth9-3/16"
Warranty10 Years with Online Registration
Resources You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING
15,000 BTU Wall Mounted Mitsubishi Mini-Split Multi Zone FS Series - Air Handler
SKUMSZ-FS15NA
Weight (in lbs)29.000000
Brand/ManufacturerMitsubishi
ControllerWireless Included
Additional InformationDrain: 5/8"
Cooling BTU15,000
Heating BTU18,000
Maximum CFM194-497 CFM
Decibel Level (dBA)25-46
RefrigerantR410A
CapacityDehumidification Rate: 0.41 gal/hr
Liquid Line1/4"
Suction Line1/2"
Electrical208/230V 1 Phase 60 Hz
PhaseSingle Phase
BTU/Tonnage15,000 BTU/1.25 Ton
Mini-Split TypeWall Mounted
Zone CompatibilityMulti Zone
Operating ModeCooling, Heating
Height12-11/16"
Width36-7/16"
Depth9-3/16"
Warranty10 Years with Online Registration
Resources You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING
Condenser Risers - 4" x 18" - 2 Pack
SKU87762
Weight (in lbs)41.000000
Brand/ManufacturerOnline Supply
Diversitech E Lite Equipment Pad and Risers Kit 18" x 38" x 3"
SKU87762 / EL1838-3
Weight (in lbs)25.000000
Brand/ManufacturerOnline Supply
Height3"
Width18"
Depth38"
Safety InformationPROPOSITION 65 WARNING

Reviews 5

Write Your Own Review
You're reviewing:36,000 BTU 19.2 SEER Mitsubishi Tri Zone Mini Split Heat Pump System 9+12+15
Your Rating

Questions and Answers

Customer Questions
No Questions
Did you find what you were looking for?
Why Choose Mitsubishi Mini Splits?
Why Choose Mitsubishi Mini Splits?

Mitsubishi Electric’s technologically advanced mini-split air conditioners and heat pumps can provide superior comfort, lower energy costs, zero emissions, and ultra-quiet heating and air conditioning in any climate.

WHY CHOOSE HVACDIRECT.COM?

Our mission is simple: To provide an open HVAC marketplace online, offering the best HVAC brands directly to the public, based on real, affordable prices. For too long, local dealers have charged whatever they could get away with - but now YOU HAVE A CHOICE.

 

Choose us for:

  • Real recommendations on only what you need (no upsells)
  • Real wholesale prices, never inflated
  • Real advice & tech support from experts in home heating & cooling
Money Icon

COMPETITIVE PRICING

We sell products at wholesale pricing. No markups, no hidden fees. Our average customer saves BETWEEN THREE TO SIX THOUSAND DOLLARS
-That's the Direct Advantage!

Best Brands

BEST BRANDS

Just because a brand is nationally known, doesn't mean it's the best. Our HVAC technicians have hand-selected the most efficient and durable products for American homeowners, giving you exactly what you need at the best pricing.

Warranty

INDUSTRY-LEADING WARRANTIES

We choose products with long, best-in-the-market warranties by manufacturers with great customer service and solid reputations. This gives you peace of mind that you'll be getting a great quality product.

Huge Savings
Read about a real life example from one of our
customers who saved thousand.

We've helped over 100,000 American homeowners and earned their trust.

See What Our Customers are Saying