42,000 BTU 19.7 SEER Mitsubishi Five Zone Heat Pump System 6+6+6+6+15
Model: MXZ-5C42NA2 / 4-MSZ-FH06 / MSZ-FH15

Price as configured: $6,609.00

42,000 BTU 19.7 SEER Mitsubishi Five Zone Heat Pump System 6+6+6+6+15

By: Mitsubishi Model: MXZ-5C42NA2 / 4-MSZ-FH06 / MSZ-FH15 ID: 7951

More Views

Price as configured: $6,609.00

Bread Checkout
 
FREE SHIPPING
Mitsubishi
Authorized Mitsubishi Dealer
Ships Within 2-3 Business Days
New

* Required Fields

Price as configured: $6,609.00

Accessories

Description

Details

The Mitsubishi Five Zone Mini Split Systems are state of the art ductless mini split heat pump systems, providing both heating and cooling for your home. Rated at 19 SEER, with an inverter-driven compressor, this efficient system will keep operating costs down while providing year-round comfort. Each living space has its own air-handling unit and each unit has its own wireless electronic temperature controller.

Indoor Units

The Mitsubishi Series MSZ-FH mini-split wall mounted air handlers are a perfect fit for your home. With multiple operating modes, multiple fan speeds, and multiple airflow directions, this unit fits the needs of nearly any room.

The MSZ-FH's i-see Sensor 3D monitors the floor and ceiling of its zone for fluctuations in temperature. If it detects an underserved area and will temporarily adjust airflow to ensure complete comfort throughout the zone. This sensor also serves as an occupancy detector, allowing the indoor unit to enter energy saving mode if no human heat signatures are detected within the zone.

The MSZ-FH series uses two advanced filters to clean and deodorize the air that passes through it. The deodorizing filter utilizes a ceramic surface element and platinum nanoparticles to absorb any offending smells. The second filter is an enzyme-based anti-allergy filter that captures and destroys bacteria and particulates.

Mitsubishi's hot start technology prevents cold drafts by delaying fan operation until the heat exchanger has warmed up.

The powerful setting on the Mitsubishi MSZ-FH series makes it easy to get your zone to the perfect temperature quickly. When it is activated, the unit temporarily increases refrigerant flow and fan speed to provide quick comfort through rapid heating or cooling.

By slowly adjusting the cooling set point and swinging the horizontal vanes, the MSZFH06NA can improve the efficiency of cooling operations without compromising the comfort provided.

When the indoor unit is run in dry mode, the coil's temperature stays just below the dew point of the return air, removing unwanted moisture. This improves your comfort and reduces the chance of mold growth and other property damage in the conditioned space.

Optimal air flow is easy to achieve with the MSZFH06NA thanks to two vane control options, standard and wide. These functions provide access to five different horizontal vane positions, six different vertical vane positions, two swing modes, a horizontal vane auto mode, and a vertical vane wide mode. Auto mode selects the best vane position based on operating mode and the swing modes cycle through all positions for maximum coverage. When wide mode is activated, fan speed increases beyond the current setting.

Outdoor Unit

The Mitsubishi Ductless Mini Split MXZ Series Heat Pump and Air Conditioner Condenser has an INVERTER-driven compressor pump that cools or warms refrigerant and sends it inside to an air handler through small pipes. Each living space has its own air-handling unit and each unit has its own wireless electronic temperature controller.

With the Mitsubishi Ductless Mini Split MXZ Series Heat Pump Air Conditioner Multi zone condenser each room or zone operates independently with its own wireless or wired remote controller so people in different rooms can choose the temperature that makes them most comfortable. This unit will work with a variety of indoor unit combinations; with indoor options such as Wall mounted ductless, Floor mounted ductless, Ceiling recessed cassette ductless, horizontal ducted ductless or even multi position ducted air handlers.

Try more five zone mini split systems

42,000 BTU 19.7 SEER Mitsubishi Multi-Zone Ductless Heat Pump Condenser

The Mitsubishi Ductless Mini Split MXZ-5C42NA2-U1 Heat Pump Air Conditioner Condenser has an INVERTER-driven compressor pump that cools or warms refrigerant and sends it inside to an air handler through small pipes. Each living space has its own air-handling unit and each unit has its own wireless electronic temperature controller.

With the Mitsubishi Ductless Mini Split MXZ-5C42NA2-U1 Heat Pump Air Conditioner Multi zone condenser each room or zone operates independently with its own wireless or wired remote controller so people in different rooms can choose the temperature that makes them most comfortable. This unit will work with a variety of indoor unit combinations; with indoor options such as Wall mounted ductless, Floor mounted ductless, Ceiling recessed cassette ductless, horizontal ducted ductless or even multi position ducted air handlers.

6,000 BTU Mitsubishi Ductless 3D I-SEE Wall Mounted Air Handler

The Mitsubishi MSZFH06NA Air Handler is a perfect fit for your home. With multiple operating modes, multiple fan speeds, and multiple airflow directions, this unit fits the needs of nearly any room.

The MSZFH06NA's i-see Sensor 3D monitors the floor and ceiling of its zone for fluctuations in temperature. If it detects an underserved area and will temporarily adjust airflow to ensure complete comfort throughout the zone. This sensor also serves as an occupancy detector, allowing the indoor unit to enter energy saving mode if no human heat signatures are detected within the zone.

The MSZFH06NA uses two advanced filters to clean and deodorize the air that passes through it. The deodorizing filter utilizes a ceramic surface element and platinum nanoparticles to absorb any offending smells. The second filter is an enzyme-based anti-allergy filter that captures and destroys bacteria and particulates.

Mitsubishi's hot start technology prevents cold drafts by delaying fan operation until the heat exchanger has warmed up.

The powerful setting on the MSZFH06NA makes it easy to get your zone to the perfect temperature quickly. When it is activated, the unit temporarily increases refrigerant flow and fan speed to provide quick comfort through rapid heating or cooling.

By slowly adjusting the cooling set point and swinging the horizontal vanes, the MSZFH06NA can improve the efficiency of cooling operations without compromising the comfort provided.

When the indoor unit is run in dry mode, the coil's temperature stays just below the dew point of the return air, removing unwanted moisture. This improves your comfort and reduces the chance of mold growth and other property damage in the conditioned space.

Optimal air flow is easy to achieve with the MSZFH06NA thanks to two vane control options, standard and wide. These functions provide access to five different horizontal vane positions, six different vertical vane positions, two swing modes, a horizontal vane auto mode, and a vertical vane wide mode. Auto mode selects the best vane position based on operating mode and the swing modes cycle through all positions for maximum coverage. When wide mode is activated, fan speed increases beyond the current setting.

6,000 BTU Mitsubishi Ductless 3D I-SEE Wall Mounted Air Handler

The Mitsubishi MSZFH06NA Air Handler is a perfect fit for your home. With multiple operating modes, multiple fan speeds, and multiple airflow directions, this unit fits the needs of nearly any room.

The MSZFH06NA's i-see Sensor 3D monitors the floor and ceiling of its zone for fluctuations in temperature. If it detects an underserved area and will temporarily adjust airflow to ensure complete comfort throughout the zone. This sensor also serves as an occupancy detector, allowing the indoor unit to enter energy saving mode if no human heat signatures are detected within the zone.

The MSZFH06NA uses two advanced filters to clean and deodorize the air that passes through it. The deodorizing filter utilizes a ceramic surface element and platinum nanoparticles to absorb any offending smells. The second filter is an enzyme-based anti-allergy filter that captures and destroys bacteria and particulates.

Mitsubishi's hot start technology prevents cold drafts by delaying fan operation until the heat exchanger has warmed up.

The powerful setting on the MSZFH06NA makes it easy to get your zone to the perfect temperature quickly. When it is activated, the unit temporarily increases refrigerant flow and fan speed to provide quick comfort through rapid heating or cooling.

By slowly adjusting the cooling set point and swinging the horizontal vanes, the MSZFH06NA can improve the efficiency of cooling operations without compromising the comfort provided.

When the indoor unit is run in dry mode, the coil's temperature stays just below the dew point of the return air, removing unwanted moisture. This improves your comfort and reduces the chance of mold growth and other property damage in the conditioned space.

Optimal air flow is easy to achieve with the MSZFH06NA thanks to two vane control options, standard and wide. These functions provide access to five different horizontal vane positions, six different vertical vane positions, two swing modes, a horizontal vane auto mode, and a vertical vane wide mode. Auto mode selects the best vane position based on operating mode and the swing modes cycle through all positions for maximum coverage. When wide mode is activated, fan speed increases beyond the current setting.

6,000 BTU Mitsubishi Ductless 3D I-SEE Wall Mounted Air Handler

The Mitsubishi MSZFH06NA Air Handler is a perfect fit for your home. With multiple operating modes, multiple fan speeds, and multiple airflow directions, this unit fits the needs of nearly any room.

The MSZFH06NA's i-see Sensor 3D monitors the floor and ceiling of its zone for fluctuations in temperature. If it detects an underserved area and will temporarily adjust airflow to ensure complete comfort throughout the zone. This sensor also serves as an occupancy detector, allowing the indoor unit to enter energy saving mode if no human heat signatures are detected within the zone.

The MSZFH06NA uses two advanced filters to clean and deodorize the air that passes through it. The deodorizing filter utilizes a ceramic surface element and platinum nanoparticles to absorb any offending smells. The second filter is an enzyme-based anti-allergy filter that captures and destroys bacteria and particulates.

Mitsubishi's hot start technology prevents cold drafts by delaying fan operation until the heat exchanger has warmed up.

The powerful setting on the MSZFH06NA makes it easy to get your zone to the perfect temperature quickly. When it is activated, the unit temporarily increases refrigerant flow and fan speed to provide quick comfort through rapid heating or cooling.

By slowly adjusting the cooling set point and swinging the horizontal vanes, the MSZFH06NA can improve the efficiency of cooling operations without compromising the comfort provided.

When the indoor unit is run in dry mode, the coil's temperature stays just below the dew point of the return air, removing unwanted moisture. This improves your comfort and reduces the chance of mold growth and other property damage in the conditioned space.

Optimal air flow is easy to achieve with the MSZFH06NA thanks to two vane control options, standard and wide. These functions provide access to five different horizontal vane positions, six different vertical vane positions, two swing modes, a horizontal vane auto mode, and a vertical vane wide mode. Auto mode selects the best vane position based on operating mode and the swing modes cycle through all positions for maximum coverage. When wide mode is activated, fan speed increases beyond the current setting.

15,000 BTU Mitsubishi Ductless 3D I-SEE Wall Mounted Air Handler

The Mitsubishi MSZFH15NA Air Handler is a perfect fit for your home. With multiple operating modes, multiple fan speeds, and multiple airflow directions, this unit fits the needs of nearly any room.

The MSZFH15NA's i-see Sensor 3D monitors the floor and ceiling of its zone for fluctuations in temperature. If it detects an underserved area and will temporarily adjust airflow to ensure complete comfort throughout the zone. This sensor also serves as an occupancy detector, allowing the indoor unit to enter energy saving mode if no human heat signatures are detected within the zone.

The MSZFH15NA uses two advanced filters to clean and deodorize the air that passes through it. The deodorizing filter utilizes a ceramic surface element and platinum nanoparticles to absorb any offending smells. The second filter is an enzyme-based anti-allergy filter that captures and destroys bacteria and particulates.

Mitsubishi's hot start technology prevents cold drafts by delaying fan operation until the heat exchanger has warmed up.

The powerful setting on the MSZFH15NA makes it easy to get your zone to the perfect temperature quickly. When it is activated, the unit temporarily increases refrigerant flow and fan speed to provide quick comfort through rapid heating or cooling.

By slowly adjusting the cooling set point and swinging the horizontal vanes, the MSZFH15NA can improve the efficiency of cooling operations without compromising the comfort provided.

When the indoor unit is run in dry mode, the coil's temperature stays just below the dew point of the return air, removing unwanted moisture. This improves your comfort and reduces the chance of mold growth and other property damage in the conditioned space.

Optimal air flow is easy to achieve with the MSZFH15NA thanks to two vane control options, standard and wide. These functions provide access to five different horizontal vane positions, six different vertical vane positions, two swing modes, a horizontal vane auto mode, and a vertical vane wide mode. Auto mode selects the best vane position based on operating mode and the swing modes cycle through all positions for maximum coverage. When wide mode is activated, fan speed increases beyond the current setting.

 

Buy More Mitsubishi Products!

6,000 BTU Mitsubishi Ductless 3D I-SEE Wall Mounted Air Handler

The Mitsubishi MSZFH06NA Air Handler is a perfect fit for your home. With multiple operating modes, multiple fan speeds, and multiple airflow directions, this unit fits the needs of nearly any room.

The MSZFH06NA's i-see Sensor 3D monitors the floor and ceiling of its zone for fluctuations in temperature. If it detects an underserved area and will temporarily adjust airflow to ensure complete comfort throughout the zone. This sensor also serves as an occupancy detector, allowing the indoor unit to enter energy saving mode if no human heat signatures are detected within the zone.

The MSZFH06NA uses two advanced filters to clean and deodorize the air that passes through it. The deodorizing filter utilizes a ceramic surface element and platinum nanoparticles to absorb any offending smells. The second filter is an enzyme-based anti-allergy filter that captures and destroys bacteria and particulates.

Mitsubishi's hot start technology prevents cold drafts by delaying fan operation until the heat exchanger has warmed up.

The powerful setting on the MSZFH06NA makes it easy to get your zone to the perfect temperature quickly. When it is activated, the unit temporarily increases refrigerant flow and fan speed to provide quick comfort through rapid heating or cooling.

By slowly adjusting the cooling set point and swinging the horizontal vanes, the MSZFH06NA can improve the efficiency of cooling operations without compromising the comfort provided.

When the indoor unit is run in dry mode, the coil's temperature stays just below the dew point of the return air, removing unwanted moisture. This improves your comfort and reduces the chance of mold growth and other property damage in the conditioned space.

Optimal air flow is easy to achieve with the MSZFH06NA thanks to two vane control options, standard and wide. These functions provide access to five different horizontal vane positions, six different vertical vane positions, two swing modes, a horizontal vane auto mode, and a vertical vane wide mode. Auto mode selects the best vane position based on operating mode and the swing modes cycle through all positions for maximum coverage. When wide mode is activated, fan speed increases beyond the current setting.

Specifications

42,000 BTU 19.7 SEER Mitsubishi Multi-Zone Ductless Heat Pump Condenser

skuMXZ-5C42NA2-U1
manufacturerMitsubishi
cooling_btu42,000
heating_btu45,000
refrigerantR410A
seer19
liquid_line1/4"x1/4"x1/4"x1/4"x1/4"
suction_line1/2"x3/8"x3/8"x3/8"x3/8"
electrical230 V. 1 Phase 60 Hz
max_breaker_size40 amps
min_breaker_size32.5
amperage_req40
nominal_capacity3.5 Ton
min_out_temp_heat65 max / 5 min F
min_out_temp_cool115 max / 14 min F
height41 9/32"
width37 13/32"
depth13"
weight189.0000
warrantyLimited warranty: five years parts and seven years compressors
resources
You will need Adobe® Acrobat® Reader to view PDF documents.
safety_informationPROPOSITION 65 WARNING


6,000 BTU Mitsubishi Ductless 3D I-SEE Wall Mounted Air Handler

skuMSZ-FH06NA
manufacturerMitsubishi
cooling_btu6,000
heating_btu8,700
refrigerantR410A
liquid_line1/4"
suction_line3/8"
electrical230 V. 1 Phase 60 Hz
nominal_capacity0.5 Ton
height12"
width36.5"
depth9"
weight29.0000
warrantyLimited warranty: five years parts
resources You will need Adobe® Acrobat® Reader to view PDF documents.
safety_informationPROPOSITION 65 WARNING


15,000 BTU Mitsubishi Ductless 3D I-SEE Wall Mounted Air Handler

skuMSZ-FH15NA
manufacturerMitsubishi
cooling_btu15,000
heating_btu18,000
refrigerantR410A
liquid_line1/4"
suction_line1/2"
electrical230 V. 1 Phase 60 Hz
nominal_capacity1.25 Ton
height12"
width36.5"
depth9"
weight29.0000
warrantyLimited warranty: five years parts
resources You will need Adobe® Acrobat® Reader to view PDF documents.
safety_informationPROPOSITION 65 WARNING


6,000 BTU Mitsubishi Ductless 3D I-SEE Wall Mounted Air Handler

skuMSZ-FH06NA
manufacturerMitsubishi
cooling_btu6,000
heating_btu8,700
refrigerantR410A
liquid_line1/4"
suction_line3/8"
electrical230 V. 1 Phase 60 Hz
nominal_capacity0.5 Ton
height12"
width36.5"
depth9"
weight29.0000
warrantyLimited warranty: five years parts
resources You will need Adobe® Acrobat® Reader to view PDF documents.
safety_informationPROPOSITION 65 WARNING



Reviews

Be the first to review this product

Write Your Own Review

You're reviewing: 42,000 BTU 19.7 SEER Mitsubishi Five Zone Heat Pump System 6+6+6+6+15

How do you rate this product? *

 
1 1 star
2 2 star
3 3 star
4 4 star
5 5 star
Quality
Price
Service

Product Q & A

Product Questions
Ask a Question Ask a Question

Sort By: 

  

 

Why Choose a Mitsubishi Product?

Why Choose Mitsubishi?

Mitsubishi is a global leader and is dedicated to building innovative, energy intelligent heating and cooling systems serving residential, commercial, and industrial applications. Their AC and Heat Pump Mini-Split systems are designed to provide years of comfort for your home while helping you to achieve high energy efficiency standards.

 

Why Buy From Us?

Customer Satisfaction

Our dedicated staff works hard to ensure that all orders are handled quickly and efficiently to ensure that you get what you ordered as quickly as possible.

 

Security

We provide a secure online shopping experience to protect your information. We also provide the option to checkout with PayPal to allow you to use a checkout service you are familiar with.

 

Save Money

Our low price guarantee provides you with confidence and piece of mind, knowing you purchased a quality product at a great price

 

See What Our Customers are Saying

Customer Reviews