1-800-397-1392
Today's Hours 10am - 6pm est
The Mitsubishi Quad Zone Mini Split Systems are state of the art ductless mini split heat pump systems, providing both heating and cooling for your home. Rated at 19 SEER, with an inverter-driven compressor, this efficient system will keep operating costs down while providing year-round comfort. Each living space has its own air-handling unit and each unit has its own wireless electronic temperature controller.
The Mitsubishi MSZ-GL Series Wall Mount Air Handler is a perfect fit for your home. With multiple operating modes, multiple fan speeds, and multiple airflow directions, this unit fits the needs of nearly any room. The MSZ-GL Series combines a hybrid catechin deodorizing filter with an enzyme-based filter for managing allergens. The anti-allergy filter captures offending particles while also breaking them down, cleaning the air as it is conditioned. Mitsubishi's hot start technology prevents cold drafts by delaying fan operation until the heat exchanger has warmed up. By adjusting the cooling set point and swinging the horizontal vanes, the unit can improve the efficiency of operation without compromising the comfort provided. When the indoor unit is run in dry mode, the coil's temperature stays just below the dew point of the return air, removing unwanted moisture. This improves comfort and reduces the chance of mold growth and other property damage in the conditioned space. Auto mode selects the best vane position based on operating mode, and the swing modes cycle through all positions for maximum coverage.
The Mitsubishi Ductless Mini Split MXZ Series Heat Pump and Air Conditioner Condenser has an INVERTER-driven compressor pump that cools or warms refrigerant and sends it inside to an air handler through small pipes. Each living space has its own air-handling unit and each unit has its own wireless electronic temperature controller.
With the Mitsubishi Ductless Mini Split MXZ Series Heat Pump Air Conditioner Multi zone condenser each room or zone operates independently with its own wireless or wired remote controller so people in different rooms can choose the temperature that makes them most comfortable. This unit will work with a variety of indoor unit combinations; with indoor options such as Wall mounted ductless, Floor mounted ductless, Ceiling recessed cassette ductless, horizontal ducted ductless or even multi position ducted air handlers.
Get the best quad zone products
The Mitsubishi MXZ-5C42NA2-U1 is a heat pump condenser designed to be used in multi zone system setups. As one air handler is needed per room that you are trying to heat and cool, multiple single zone condensers can take up a lot of space in your yard, making a multi zone unit more practical in many applications.
The Mitsubishi MXZ-5C42NA2-U1 is rated at 42,000 BTU, which generally should be the same or greater than the total BTU count across all air handlers that this unit is paired with. In some instances, a certified pairing will have a higher BTU count total than this condenser’s rating. This is intentional, as the condenser can easily handle more, however anything higher than this rating can potentially lower the speed that the unit can heat and cool, as well as limit the functional outputs of each air handler if they are all running at the same time. Please note that in order to function, this heat pump condenser must be installed with compatible air handlers, controllers, and other installation equipment, available at an additional cost
Mitsubishi offers a 5 year parts and 7 year compressor warranty on all of its products. When the unit is registered online through the manufacturer after an installation that follows your state and local codes, the warranty is upgraded to a 10 year parts and compressor warranty.
With its variable speed compressor, the MXZ-5C42NA2-U1 can provide more precise adjustments to the covered spaces with the right air handlers. This also slightly improves electrical efficiency by ramping the compressor up and down based on the unit’s air handlers’ needs, as well as providing a more stable temperature output from the connected air handlers to provide superior comfort.
For ease of control, many air handlers that are compatible with the MXZ-5C42NA2-U1 can use any Mitsubishi-brand thermostat or adapter. The most convenient to control— the Kumo cloud WiFi adapter, found here—allows each air handler to be accessed from anywhere that you have Internet. Please note that in most applications, you will need one thermostat or adapter per indoor air handler that you want to be able to control with it.
Please note that in order to function, this air handler must be installed with a condenser and other installation equipment, available at an additional cost.
The Mitsubishi MSZ-GL06NA air handler is designed to be able to function as a single zone system or with a multi zone system setup. This unit is manufactured as part of Mitsubishi’s standard air handler series, making it an inexpensive choice for efficient home comfort. With its ability to work with both cooling-only and heat pump condensers, the MSZ-GL06NA can function in almost any basic configuration and application. The unit also has the ability to ramp up and down based on the thermostat’s needs along with an automated vertical air swing adjustment system to direct the airflow where it needs to go, keeping you comfortable year-round with the right condenser.
The Mitsubishi MSZ-GL09NA air handler is designed to be able to function as a single zone system or with a multi zone system setup. This unit is manufactured as part of Mitsubishi’s standard air handler series, making it an inexpensive choice for efficient home comfort. With its ability to work with both cooling-only and heat pump condensers, the MSZ-GL09NA can function in almost any basic configuration and application. The unit also has the ability to ramp up and down based on the thermostat’s needs along with an automated vertical air swing adjustment system to direct the airflow where it needs to go, keeping you comfortable year-round with the right condenser.
Please note that in order to function, this air handler must be installed with a condenser and other installation equipment, available at an additional cost.
The Mitsubishi MSZ-GL12NA air handler is designed to be able to function as a single zone system or with a multi zone system setup. This unit is manufactured as part of Mitsubishi’s standard air handler series, making it an inexpensive choice for efficient home comfort. With its ability to work with both cooling-only and heat pump condensers, the MSZ-GL12NA can function in almost any basic configuration and application. The unit also has the ability to ramp up and down based on the thermostat’s needs along with an automated vertical air swing adjustment system to direct the airflow where it needs to go, keeping you comfortable year-round with the right condenser.
Please note that in order to function, this air handler must be installed with a condenser and other installation equipment, available at an additional cost.
| 42,000 BTU Ductless Mitsubishi Mini-Split Multi Zone MXZ-C Series - Heat Pump Condenser | |
|---|---|
| SKU | MXZ-5C42NA3 |
| Refrigerant Charge | Pre-Charged For: 98' |
| Weight (in lbs) | 189.000000 |
| AHRI Certificate Number | 201754913, 201754914, 201755021 |
| Brand/Manufacturer | Mitsubishi |
| Additional Information | Heat Pump |
| Additional Information | Maximum Line Set Length: 82' |
| Additional Information | Maximum System Line Length: 262' |
| HSPF | 10.3 |
| Cooling BTU | 40,500 |
| Heating BTU | 45,000 |
| Decibel Level (dBA) | 56-58 |
| Energy Star | No |
| Refrigerant | R410A |
| SEER1 (Efficiency) | 18-20 |
| EER | 9.2 |
| Liquid Line | 1/4" (5) |
| Suction Line | 1/2" (1), 3/8" (4) |
| Electrical | 208/230V 1 Phase 60 Hz |
| Phase | Single Phase |
| Max Breaker Size | 40 |
| Min. Breaker Size | 32.5 |
| Tonnage | 3.5 Ton |
| BTU/Tonnage | 42,000 BTU/3.5 Ton |
| Min/Max Outdoor Temp for Heating | 5°-65° |
| Min/Max Outdoor Temp for Cooling | 14°-115° |
| Zone Compatibility | Multi Zone |
| Operating Mode | Cooling, Heating |
| Height | 41-9/32" |
| Width | 37-13/32" |
| Depth | 13" |
| Warranty | 10 Years with Online Registration |
| Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING |
| 6,000 BTU Wall Mounted Mitsubishi Mini-Split Multi Zone GL - Air Handler | |
| SKU | MSZ-GL06NA |
| Weight (in lbs) | 26.000000 |
| Brand/Manufacturer | Mitsubishi |
| Controller | Wireless Included |
| Additional Information | Drain: 5/8" |
| Cooling BTU | 6,000 BTU |
| Heating BTU | 7,200 BTU |
| Maximum CFM | 109-406 CFM |
| Decibel Level (dBA) | 19-43 |
| Refrigerant | R410A |
| Capacity | Dehumidification Rate: 0.23 gal/hr |
| Liquid Line | 1/4" |
| Suction Line | 3/8" |
| Electrical | 208/230v 1 Phase 60 Hz |
| BTU/Tonnage | 6,000 BTU/0.5 Ton |
| Mini-Split Type | Wall Mounted |
| Zone Compatibility | Multi Zone |
| Operating Mode | Cooling, Heating |
| Height | 11-5/8" |
| Width | 31-7/16" |
| Depth | 9-1/8" |
| Warranty | 10 Years with Online Registration |
| Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING |
| 9,000 BTU Wall Mounted Mitsubishi Mini-Split Multi Zone GL - Air Handler | |
| SKU | MSZ-GL09NA |
| Weight (in lbs) | 26.000000 |
| Brand/Manufacturer | Mitsubishi |
| Controller | Wireless Included |
| Additional Information | Drain: 5/8" |
| Cooling BTU | 9,000 BTU |
| Heating BTU | 10,900 BTU |
| Maximum CFM | 109-406 CFM |
| Decibel Level (dBA) | 19-43 |
| Refrigerant | R410A |
| Capacity | Dehumidification Rate: 0.23 gal/hr |
| Liquid Line | 1/4" |
| Suction Line | 3/8" |
| Electrical | 208/230v 1 Phase 60 Hz |
| BTU/Tonnage | 9,000 BTU/0.75 Ton |
| Mini-Split Type | Wall Mounted |
| Zone Compatibility | Multi Zone |
| Operating Mode | Cooling, Heating |
| Height | 11-5/8" |
| Width | 31-7/16" |
| Depth | 9-1/8" |
| Warranty | 10 Years with Online Registration |
| Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING |
| 12,000 BTU Wall Mounted Mitsubishi Mini-Split Multi Zone GL - Air Handler | |
| SKU | MSZ-GL12NA |
| Weight (in lbs) | 26.000000 |
| Brand/Manufacturer | Mitsubishi |
| Controller | Wireless Included |
| Additional Information | Drain: 5/8" |
| Cooling BTU | 12,000 BTU |
| Heating BTU | 14,400 BTU |
| Maximum CFM | 109-399 CFM |
| Decibel Level (dBA) | 19-45 |
| Refrigerant | R410A |
| Capacity | Dehumidification Rate: 0.38 gal/hr |
| Liquid Line | 1/4" |
| Suction Line | 3/8" |
| Electrical | 208/230v 1 Phase 60 Hz |
| Phase | Single Phase |
| BTU/Tonnage | 12,000 BTU/1 Ton |
| Mini-Split Type | Wall Mounted |
| Zone Compatibility | Multi Zone |
| Operating Mode | Cooling, Heating |
| Height | 11-5/8" |
| Width | 31-7/16" |
| Depth | 9-1/8" |
| Warranty | 10 Years with Online Registration |
| Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING |
Mitsubishi Electric’s technologically advanced mini-split air conditioners and heat pumps can provide superior comfort, lower energy costs, zero emissions, and ultra-quiet heating and air conditioning in any climate.
Our mission is simple: To provide an open HVAC marketplace online, offering the best HVAC brands directly to the public, based on real, affordable prices. For too long, local dealers have charged whatever they could get away with - but now YOU HAVE A CHOICE.
Choose us for:
We sell products at wholesale pricing. No markups, no hidden fees. Our average customer saves BETWEEN THREE TO SIX THOUSAND DOLLARS
-That's the Direct Advantage!
Just because a brand is nationally known, doesn't mean it's the best. Our HVAC technicians have hand-selected the most efficient and durable products for American homeowners, giving you exactly what you need at the best pricing.
We choose products with long, best-in-the-market warranties by manufacturers with great customer service and solid reputations. This gives you peace of mind that you'll be getting a great quality product.
We've helped over 100,000 American homeowners and earned their trust.
Real technicians with real experience are available on the phone and chat to help you pick your perfect system
Unlike local dealers who try to upsell expensive brands or unnecessary equipment, we only recommend the exact products you need, and choose from affordable alternatives to name brands.
Quickly filter what you're loooking for with our HVAC EASY SYSTEM SELECT tool.
We've helped over 100,000 American homeowners and earned their trust.
All our HVAC systems ship free, making your new system even more affordable. Plus, looko for free shipping on many standalone products too.
Don't wait for your system. We have over $50 million dollars of inventory in our warehouses nationwide - we're ready for your order!
Our website displays real-time inventory, so you know exactly when to expect your order. Choose from in-stock items so you can get your new system right away.
We've helped over 100,000 American homeowners and earned their trust.
Got everything you needed to install? See the recommended and/or required options for installation below.
Check the items you would like to include with your order
Contact Our Product Specialist
