We use cookies to make your experience better.To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies.Learn more.
A Complete Basement Moisture Solution, Ready to Install
Basements hold humidity longer than anywhere else in the house, and that shows up as mold, musty odors, and air that never feels quite clean. This package pairs the Santa Fe Classic dehumidifier with the pump and wall control that make it work the way it should, so you're not piecing an installation together after the fact.
What's in the Package
Santa Fe Classic Basement Dehumidifier (SA8109) pulls up to 110 pints per day on standard 115V power, using R410A refrigerant.
Dehumidifier Condensate Pump Kit (4022220) moves collected water up to 12 feet up and 20 feet out, so a nearby floor drain isn't required.
Honeywell HumidiPRO Digital Humidity Control (SKU 4041649) lets you set and monitor humidity from a wall location instead of walking down to the unit.
Why Buy It as a Package
One order covers the install, so you're not tracking down parts later
Put the unit where it makes sense, not where the drain happens to be
Set-and-forget humidity control from an easy-to-reach spot
Santa Fe Dehumidifier Condensate Pump Kit (SKU 4022220)
The Dehumidifier Condensate Pump Kit (SKU 4022220) is designed to remove condensate from compatible Quest and Santa Fe dehumidifiers when a floor drain is not nearby.
The pump provides installation flexibility by moving collected water vertically and horizontally to a remote drain location.
Manufacturer and dealer listings identify a 2-quart reservoir, float-switch operation, and 120/115V operation depending on listing.
Product Features:
SKU 4022220: Listed as the condensate pump kit part number for supported dehumidifier applications.
2-Quart Reservoir: Pump reservoir capacity supports automatic collection and discharge.
12-Foot Vertical Lift: Manufacturer listings state the pump can move water up to 12 feet vertically.
20-Foot Total Run: Designed to move condensate up to 20 feet total distance.
Float Switch Operation: Float switch activates pumping only when water level rises.
Drain Hose Support: Dealer listings note a 20-foot drain hose or flexible hose kit depending on package.
Remote Drain Solution: Ideal where gravity drain is not practical.
Warranty
Includes manufacturer limited warranty coverage where applicable. Verify final warranty terms with the manufacturer or authorized seller.
Honeywell HumidiPRO Digital Humidity Control (SKU 4041649)
Gain digital control of your Quest or Santa Fe dehumidifier with the Honeywell HumidiPRO. This humidistat can be installed on a wall or onto your HVAC unit's return duct to receive the best results.
Compatibility
The HumidiPRO works with both Quest and Santa Fe dehumidifiers, so one control covers either brand. That includes whole-home and ventilating models like the Santa Fe Compact70 and Ultra70. If you're running a Quest unit, it wires in the same way, no brand-specific control needed.
Installing Variations
Based on how you install the HumidiPRO, the control will operate accordingly. For a more precise reading, it is highly recommended to install the Honeywell HumidiPRO on a wall on the return side of the home's HVAC duct. Another option is to install the controller on a wall that is away from windows, bathrooms, and doors.
How to Work It
It doesn't get easier than this. With the HumidiPRO's easy-to-operate system, all you have to do is select a preprogrammed setting and you're all set.
Dehumidification: Simply use the controls to set your desired maximum humidity level.
Automatic Mode: The controller receives a reading from the included outside sensor and automatically sets the right humidity level to prevent window condensation.
Manual Mode: Set the desired humidity level, and the unit will maintain it until you make a change.
Santa Fe Classic Basement Dehumidifier, 110-pint | R410A
Santa Fe Classic 110-Pint Basement Dehumidifier
The Santa Fe Classic (Model 4044710 / SKU SA8109) is a high-capacity dehumidifier built for large basements, crawl spaces, and finished lower levels. It pulls out the moisture that causes mold, musty odors, sweating pipes, and damage to stored belongings and building materials.
The Classic removes up to 110 pints per day at 80°F and 60% relative humidity, and still gets 76 pints in the cooler 65°F air a basement actually runs at. Santa Fe sizes it for 2,500 to 2,900 sq. ft. based on a 10-foot ceiling, so it covers most full basements on its own.
The vertical flow-down cabinet takes up a 20" by 17" footprint and stands 36" tall, which fits against a wall or in a mechanical room without eating the space a horizontal unit would. It plugs into a standard 115V outlet, runs on R454B refrigerant, and drains by gravity to a nearby floor drain.
Product Features:
110 Pints Per Day: Rated at 80°F and 60% RH, and 76 pints per day at 65°F and 60% RH.
Covers 2,500 to 2,900 Sq. Ft.: Basement sizing based on a 10-foot ceiling height.
275 CFM Blower: Moves far more air than a portable unit, so dry air actually reaches the far corners.
Vertical Flow-Down Cabinet: 20"W x 36"H x 17"D, 110 lbs, easy to tuck along a wall.
MERV 13 Filter: Comes standard and catches dust, pollen, and mold spores. Vacuum it regularly and replace it about every 6 months.
Runs Down to 56°F: Engineered for cool basement temperatures, with automatic defrost if frost builds on the coil.
7.27 Pints Per kWh: One of the most efficient residential dehumidifiers you can buy, and it exceeds Department of Energy standards.
R454B Refrigerant: Lower global warming potential than the R410A it replaces.
Auto Restart: Starts back up on its own after a power outage.
6-Foot Gravity Drain Hose Included: 3/4" drain connection, no bucket to empty.
Installation Options
Most people set the Classic up free-standing. Plug it into a 115V grounded outlet using the 9-foot cord, run the included hose to a floor drain, set your humidity level, and walk away.
If the drain sits above the unit or across the room, add the condensate pump kit. If you want dry air delivered to specific rooms instead of just the basement, Santa Fe offers duct kits that let you tie the Classic into supply or return ductwork.
Free-Standing: Standard outlet, gravity drain, no assembly required.
Ducted: Optional duct kits send dry air where you want it, or tie into the HVAC system.
Pumped Drainage: Optional condensate pump kit moves water up and out when no floor drain is nearby.
Placement: Basements, crawl spaces, garages, workshops, home theaters, and storage rooms.
Warranty
The Santa Fe Classic is covered by Santa Fe's 6-year warranty. See the owner's manual for full terms and service details.
Warranty Information
Santa Fe (Therma-Stor) warrants the Classic Dehumidifier to be free from defects in materials and workmanship. The unit includes a 5-year limited warranty, with extended 6-year coverage on select components.
Warranty coverage may vary based on installation and registration requirements. Refer to the manufacturer’s documentation for complete warranty details.
Build Quality and Components
The Classic weighs 110 lbs in a 20"W x 36"H x 17"D cabinet, and that weight tells you what is inside. It is a heavy-duty steel cabinet over a real refrigeration system, not a light plastic shell built to a price point. Therma-Stor has been building these in the USA for decades, and the Classic is one of the longest-running models in the line.
Efficiency comes from the internals. An upgraded compressor and larger refrigeration coils let the unit pull 7.27 pints of water per kilowatt-hour, which is where the low operating cost comes from. The system holds 20 oz of R454B and is tuned to keep working in cool basement air, with automatic defrost that clears the coil and restarts on its own instead of icing over and quitting.
The 275 CFM blower runs on an independent fan switch, so you can keep air circulating all the time for even moisture levels or run the fan only when the compressor kicks on. A MERV 13 filter sits at the intake and protects the coil while it cleans the air. The cabinet also comes with pre-drilled mounting holes for the condensate pump kit and screw-on collars for duct connections, so accessories bolt on without cutting into the housing.
Why Choose the Santa Fe Classic Dehumidifier?
High-Capacity Moisture Removal
Removes up to 116 pints per day and covers 2,500 to 2,900 sq. ft., so one unit handles a full basement.
Still pulls 76 pints per day at 65°F, where most portable dehumidifiers start to fall off.
Vertical Cabinet Design
Takes up a 20" by 17" footprint and stands 36" tall, so it sits along a wall instead of eating floor space.
The 275 CFM blower pushes dry air across the room rather than just the corner it sits in.
Cleaner Basement Air
A MERV 13 filter comes standard and catches dust, pollen, and mold spores as air passes through.
Pulling humidity down below 60% stops the mold and mildew that cause musty basement odors.
Low Operating Cost
Removes 7.27 pints of water per kilowatt-hour, well past Department of Energy minimums.
Drier air feels cooler, so you can run the thermostat a few degrees higher in summer.
Set It and Forget It
Automatic defrost keeps it working down to 56°F, and auto restart brings it back after a power outage.
Backed by Santa Fe's 6-year warranty on units built after January 1, 2024.
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
Honeywell HumidiPRO Digital Humidity Control (SKU 4041649)
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
