50,000 BTU 95% AFUE Thermo Pride Mobile Home Gas Furnace

High-Efficiency 50,000 BTU Gas Furnace Designed for Manufactured and Mobile Homes

Bring dependable, energy-saving warmth to your manufactured or mobile home with the Thermo Pride CMC2-50D36N. This 95% AFUE condensing, downflow furnace delivers 50,000 BTU/h of heating input and 48,000 BTU/h of rated output. Designed for direct-vent, sealed-combustion installation, it includes an integrated coil cabinet that allows a compatible air conditioning evaporator coil to be added separately for a complete heating and cooling system.

Why Customers Choose This Thermo Pride Furnace

• Designed for Mobile Homes - Purpose-built for manufactured and mobile home applications with a downflow air configuration.
• 95% AFUE Efficiency - High-efficiency condensing operation helps maximize the usable heat from each unit of fuel.
• 50,000 BTU/h Heating Input - Produces 48,000 BTU/h of rated heating output for properly sized applications.
• Natural Gas Furnace - The “N” model designation identifies this unit as configured for natural gas; follow manufacturer instructions and local codes for any approved LP conversion.
• Integrated Coil Cabinet - Includes a built-in cabinet for a separately purchased compatible evaporator coil, allowing the furnace to support central air conditioning.
• Up to 3.5-Ton A/C Capability - Supports a recommended air conditioning system up to 3.5 tons when matched and configured correctly.
• Four-Speed PSC Blower - Features a 1/2 HP, four-speed PSC direct-drive blower motor with 1,162 CFM airflow at 0.5 in. W.C. external static pressure on high speed.
• Direct-Vent Sealed Combustion - Uses 2-inch PVC venting and sealed-combustion design for approved installation applications.

Reliable Heating for Manufactured Homes

The CMC2-50D36N combines high-efficiency gas heating with central cooling flexibility in one tall cabinet. Its integrated coil section accommodates a separately selected 2- to 3-ton or 3.5-ton evaporator coil, while the furnace’s blower settings can be configured by a qualified installer to match compatible 24,000, 30,000, 36,000, or 42,000 BTU air conditioning equipment. The evaporator coil and outdoor condensing unit are not included.

What Is Included

• Thermo Pride 50,000 BTU/h 95% AFUE condensing downflow mobile home gas furnace with integrated coil cabinet.

Installation Requirements

Professional installation is required to confirm heating-load sizing, natural gas supply, electrical service, venting layout, condensate management, ductwork, clearances, and compliance with all applicable codes. The furnace operates on 115 VAC, 60 Hz, single-phase power, has a maximum fuse size of 15 amps, and measures approximately 76-1/8 in. high, 18-3/4 in. wide, and 25-3/4 in. deep. A compatible evaporator coil and outdoor air conditioner must be selected separately if cooling is desired.

Warranty

The Thermo Pride CMC2-50D36N includes manufacturer-backed limited warranty coverage. Review the current manufacturer warranty documentation and registration requirements for complete terms, conditions, and eligibility details.