0% Financing for 24 Months* Available - Buy Now and Pay later!

Ventis 6 Inch Class A Pipe And Components

Required Fields *

By

Ventis

In stock

Model

VA-6

ID

15053

Rating:
80% of 100
In Stock - Ready to Ship
Your Low Price $0.00
Customize Ventis 6 Inch Class A Pipe And Components
Ventis 48 Inch Class A Pipe
Ventis 36 Inch Class A Pipe
Ventis 24 Inch Class A Pipe
Ventis 18 Inch Class A Pipe
No Thank You
Ventis 12 Inch Class A Pipe
Ventis 6 Inch Class A Pipe
Ventis 6 inch Class A Telescoping Pipe
Ventis 15 Degree Elbow Kit With Support
Ventis 30 Degree Elbow Kit With Support
Ventis 11 Inch H Square Ceiling Support Box With Universal Pipe Adapter
Ventis 24 Inch H Square Ceiling Support Box With Universal Pipe Adapter
Ventis Firestop Radiation Shield
Ventis Attic Insulation Shield
Ventis Mesh For Standard, Wood, And Wide Open Caps
Ventis Stainless Storm Collar
Ventis Universal Class A Adapter
Ventis Galvanized Vented 0-6/12 Flashing With AL Storm Collar
Ventis Galvanized Vented 7-12/12 Flashing With AL Storm Collar
Ventis Galvanized Vented Flat Roof Flashing With AL Storm Collar
Ventis Vinyl Siding Kit For Wall Pass Throughs
Ventis 2-6 Inch ADJ Lateral Wall Stand Off (Every 8 ft)
Ventis 12 Inch Wall Pass Through Extension
Ventis 4-8 Inch Wall Pass Through/Thimble
Ventis Galvanized 2-6 Inch Vertical Wall Support (Every 8 ft)
Ventis Stainless 2-6 Inch Vertical Wall Support (Every 8 ft)
Ventis Galvanized Up To 14 Inch Wall Support (Replaces Tee Support)Every 8 ft)
Ventis Stainless Up To 14 Inch Wall Support (Replaces Tee Support)Every 8 ft)
Ventis 6 Inch Tee Support
Ventis 36 Inch Long Finishing Cover For Wall Pass Throughs
Ventis 2-1/2 Inch Finishing Cover For Wall Pass Throughs
Ventis 6 Inch Tee With Cap
Ventis Exterior Stainless Steel Wall Pass Through- To Match Stainless Pipe
Ventis Galvanized Roof Brace- More Than 5' Of Pipe Above The Roof
Ventis 6 Inch Class A Pipe

$0.00

The Ventis Class-A Chimney system is intended for use with heating appliances utilizing solid fuels, oil, gas (natural or propane) and coal. This includes, but is not limited to, the following appliance types: free standing wood stoves, wood stove inserts, fireboxes, fireplaces, furnaces, boilers, stoves, ranges or water heaters that require a UL103 HT chimney system. Ventis Class-A is not listed, nor intended, to be installed with forced draft or positive pressure heating appliances.

Features
  • Used whenever a chimney penetrates a wall, ceiling, or any other surface in your home
  • Listed to UL103HT & ULC S629
  • 304L Inner Pipe
  • Made In The USA
  • Attractive 430 Stainless Steel Mirror Finish On Outer Casing
  • 2" Clearance To Combustibles
  • 8" Outside Diameter
Ventis Galvanized Up To 14 Inch Wall Support (Replaces Tee Support)Every 8 ft)

The Ventis Class-A Chimney system is intended for use with heating appliances utilizing solid fuels, oil, gas (natural or propane) and coal. This includes, but is not limited to, the following appliance types: free standing wood stoves, wood stove inserts, fireboxes, fireplaces, furnaces, boilers, stoves, ranges or water heaters that require a UL103 HT chimney system. Ventis Class-A is not listed, nor intended, to be installed with forced draft or positive pressure heating appliances.

Features
  • Used whenever a chimney penetrates a wall, ceiling, or any other surface in your home
  • Listed to UL103HT & ULC S629
  • 304L Inner Pipe
  • Made In The USA
  • Attractive 430 Stainless Steel Mirror Finish On Outer Casing
  • 2" Clearance To Combustibles
Ventis Galvanized Vented 7-12/12 Flashing With AL Storm Collar

The Ventis Class-A Chimney system is intended for use with heating appliances utilizing solid fuels, oil, gas (natural or propane) and coal. This includes, but is not limited to, the following appliance types: free standing wood stoves, wood stove inserts, fireboxes, fireplaces, furnaces, boilers, stoves, ranges or water heaters that require a UL103 HT chimney system. Ventis Class-A is not listed, nor intended, to be installed with forced draft or positive pressure heating appliances.

Features
  • Used whenever a chimney penetrates a wall, ceiling, or any other surface in your home
  • Listed to UL103HT & ULC S629
  • 304L Inner Pipe
  • Made In The USA
  • Attractive 430 Stainless Steel Mirror Finish On Outer Casing
  • 2" Clearance To Combustibles
Ventis Galvanized Vented Flat Roof Flashing With AL Storm Collar

The Ventis Class-A Chimney system is intended for use with heating appliances utilizing solid fuels, oil, gas (natural or propane) and coal. This includes, but is not limited to, the following appliance types: free standing wood stoves, wood stove inserts, fireboxes, fireplaces, furnaces, boilers, stoves, ranges or water heaters that require a UL103 HT chimney system. Ventis Class-A is not listed, nor intended, to be installed with forced draft or positive pressure heating appliances.

Features
  • Used whenever a chimney penetrates a wall, ceiling, or any other surface in your home
  • Listed to UL103HT & ULC S629
  • 304L Inner Pipe
  • Made In The USA
  • Attractive 430 Stainless Steel Mirror Finish On Outer Casing
  • 2" Clearance To Combustibles
Ventis Vinyl Siding Kit For Wall Pass Throughs

The Ventis Class-A Chimney system is intended for use with heating appliances utilizing solid fuels, oil, gas (natural or propane) and coal. This includes, but is not limited to, the following appliance types: free standing wood stoves, wood stove inserts, fireboxes, fireplaces, furnaces, boilers, stoves, ranges or water heaters that require a UL103 HT chimney system. Ventis Class-A is not listed, nor intended, to be installed with forced draft or positive pressure heating appliances.

Features
  • Used whenever a chimney penetrates a wall, ceiling, or any other surface in your home
  • Listed to UL103HT & ULC S629
  • 304L Inner Pipe
  • Made In The USA
  • Attractive 430 Stainless Steel Mirror Finish On Outer Casing
  • 2" Clearance To Combustibles
Ventis 2-6 Inch ADJ Lateral Wall Stand Off (Every 8 ft)

The Ventis Class-A Chimney system is intended for use with heating appliances utilizing solid fuels, oil, gas (natural or propane) and coal. This includes, but is not limited to, the following appliance types: free standing wood stoves, wood stove inserts, fireboxes, fireplaces, furnaces, boilers, stoves, ranges or water heaters that require a UL103 HT chimney system. Ventis Class-A is not listed, nor intended, to be installed with forced draft or positive pressure heating appliances.

Features
  • Used whenever a chimney penetrates a wall, ceiling, or any other surface in your home
  • Listed to UL103HT & ULC S629
  • 304L Inner Pipe
  • Made In The USA
  • Attractive 430 Stainless Steel Mirror Finish On Outer Casing
  • 2" Clearance To Combustibles
Ventis 12 Inch Wall Pass Through Extension

The Ventis Class-A Chimney system is intended for use with heating appliances utilizing solid fuels, oil, gas (natural or propane) and coal. This includes, but is not limited to, the following appliance types: free standing wood stoves, wood stove inserts, fireboxes, fireplaces, furnaces, boilers, stoves, ranges or water heaters that require a UL103 HT chimney system. Ventis Class-A is not listed, nor intended, to be installed with forced draft or positive pressure heating appliances.

Features
  • Used whenever a chimney penetrates a wall, ceiling, or any other surface in your home
  • Listed to UL103HT & ULC S629
  • 304L Inner Pipe
  • Made In The USA
  • Attractive 430 Stainless Steel Mirror Finish On Outer Casing
  • 2" Clearance To Combustibles
Ventis 4-8 Inch Wall Pass Through/Thimble

The Ventis Class-A Chimney system is intended for use with heating appliances utilizing solid fuels, oil, gas (natural or propane) and coal. This includes, but is not limited to, the following appliance types: free standing wood stoves, wood stove inserts, fireboxes, fireplaces, furnaces, boilers, stoves, ranges or water heaters that require a UL103 HT chimney system. Ventis Class-A is not listed, nor intended, to be installed with forced draft or positive pressure heating appliances.

Features
  • Used whenever a chimney penetrates a wall, ceiling, or any other surface in your home
  • Listed to UL103HT & ULC S629
  • 304L Inner Pipe
  • Made In The USA
  • Attractive 430 Stainless Steel Mirror Finish On Outer Casing
  • 2" Clearance To Combustibles
Ventis Galvanized 2-6 Inch Vertical Wall Support (Every 8 ft)

The Ventis Class-A Chimney system is intended for use with heating appliances utilizing solid fuels, oil, gas (natural or propane) and coal. This includes, but is not limited to, the following appliance types: free standing wood stoves, wood stove inserts, fireboxes, fireplaces, furnaces, boilers, stoves, ranges or water heaters that require a UL103 HT chimney system. Ventis Class-A is not listed, nor intended, to be installed with forced draft or positive pressure heating appliances.

Features
  • Used whenever a chimney penetrates a wall, ceiling, or any other surface in your home
  • Listed to UL103HT & ULC S629
  • 304L Inner Pipe
  • Made In The USA
  • Attractive 430 Stainless Steel Mirror Finish On Outer Casing
  • 2" Clearance To Combustibles
Ventis Stainless 2-6 Inch Vertical Wall Support (Every 8 ft)

The Ventis Class-A Chimney system is intended for use with heating appliances utilizing solid fuels, oil, gas (natural or propane) and coal. This includes, but is not limited to, the following appliance types: free standing wood stoves, wood stove inserts, fireboxes, fireplaces, furnaces, boilers, stoves, ranges or water heaters that require a UL103 HT chimney system. Ventis Class-A is not listed, nor intended, to be installed with forced draft or positive pressure heating appliances.

Features
  • Used whenever a chimney penetrates a wall, ceiling, or any other surface in your home
  • Listed to UL103HT & ULC S629
  • 304L Inner Pipe
  • Made In The USA
  • Attractive 430 Stainless Steel Mirror Finish On Outer Casing
  • 2" Clearance To Combustibles
Ventis Universal Class A Adapter

The Ventis Class-A Chimney system is intended for use with heating appliances utilizing solid fuels, oil, gas (natural or propane) and coal. This includes, but is not limited to, the following appliance types: free standing wood stoves, wood stove inserts, fireboxes, fireplaces, furnaces, boilers, stoves, ranges or water heaters that require a UL103 HT chimney system. Ventis Class-A is not listed, nor intended, to be installed with forced draft or positive pressure heating appliances.

Features
  • Used whenever a chimney penetrates a wall, ceiling, or any other surface in your home
  • Listed to UL103HT & ULC S629
  • 304L Inner Pipe
  • Made In The USA
  • Attractive 430 Stainless Steel Mirror Finish On Outer Casing
  • 2" Clearance To Combustibles
Ventis Stainless Up To 14 Inch Wall Support (Replaces Tee Support)Every 8 ft)

The Ventis Class-A Chimney system is intended for use with heating appliances utilizing solid fuels, oil, gas (natural or propane) and coal. This includes, but is not limited to, the following appliance types: free standing wood stoves, wood stove inserts, fireboxes, fireplaces, furnaces, boilers, stoves, ranges or water heaters that require a UL103 HT chimney system. Ventis Class-A is not listed, nor intended, to be installed with forced draft or positive pressure heating appliances.

Features
  • Used whenever a chimney penetrates a wall, ceiling, or any other surface in your home
  • Listed to UL103HT & ULC S629
  • 304L Inner Pipe
  • Made In The USA
  • Attractive 430 Stainless Steel Mirror Finish On Outer Casing
  • 2" Clearance To Combustibles
Ventis 6 Inch Tee Support

The Ventis Class-A Chimney system is intended for use with heating appliances utilizing solid fuels, oil, gas (natural or propane) and coal. This includes, but is not limited to, the following appliance types: free standing wood stoves, wood stove inserts, fireboxes, fireplaces, furnaces, boilers, stoves, ranges or water heaters that require a UL103 HT chimney system. Ventis Class-A is not listed, nor intended, to be installed with forced draft or positive pressure heating appliances.

Features
  • Used whenever a chimney penetrates a wall, ceiling, or any other surface in your home
  • Listed to UL103HT & ULC S629
  • 304L Inner Pipe
  • Made In The USA
  • Attractive 430 Stainless Steel Mirror Finish On Outer Casing
  • 2" Clearance To Combustibles
Ventis 36 Inch Long Finishing Cover For Wall Pass Throughs

The Ventis Class-A Chimney system is intended for use with heating appliances utilizing solid fuels, oil, gas (natural or propane) and coal. This includes, but is not limited to, the following appliance types: free standing wood stoves, wood stove inserts, fireboxes, fireplaces, furnaces, boilers, stoves, ranges or water heaters that require a UL103 HT chimney system. Ventis Class-A is not listed, nor intended, to be installed with forced draft or positive pressure heating appliances.

Features
  • Used whenever a chimney penetrates a wall, ceiling, or any other surface in your home
  • Listed to UL103HT & ULC S629
  • 304L Inner Pipe
  • Made In The USA
  • Attractive 430 Stainless Steel Mirror Finish On Outer Casing
  • 2" Clearance To Combustibles
Ventis 2-1/2 Inch Finishing Cover For Wall Pass Throughs

The Ventis Class-A Chimney system is intended for use with heating appliances utilizing solid fuels, oil, gas (natural or propane) and coal. This includes, but is not limited to, the following appliance types: free standing wood stoves, wood stove inserts, fireboxes, fireplaces, furnaces, boilers, stoves, ranges or water heaters that require a UL103 HT chimney system. Ventis Class-A is not listed, nor intended, to be installed with forced draft or positive pressure heating appliances.

Features
  • Used whenever a chimney penetrates a wall, ceiling, or any other surface in your home
  • Listed to UL103HT & ULC S629
  • 304L Inner Pipe
  • Made In The USA
  • Attractive 430 Stainless Steel Mirror Finish On Outer Casing
  • 2" Clearance To Combustibles
Ventis 6 Inch Tee With Cap

The Ventis Class-A Chimney system is intended for use with heating appliances utilizing solid fuels, oil, gas (natural or propane) and coal. This includes, but is not limited to, the following appliance types: free standing wood stoves, wood stove inserts, fireboxes, fireplaces, furnaces, boilers, stoves, ranges or water heaters that require a UL103 HT chimney system. Ventis Class-A is not listed, nor intended, to be installed with forced draft or positive pressure heating appliances.

Features
  • Used whenever a chimney penetrates a wall, ceiling, or any other surface in your home
  • Listed to UL103HT & ULC S629
  • 304L Inner Pipe
  • Made In The USA
  • Attractive 430 Stainless Steel Mirror Finish On Outer Casing
  • 2" Clearance To Combustibles
Ventis Exterior Stainless Steel Wall Pass Through- To Match Stainless Pipe

The Ventis Class-A Chimney system is intended for use with heating appliances utilizing solid fuels, oil, gas (natural or propane) and coal. This includes, but is not limited to, the following appliance types: free standing wood stoves, wood stove inserts, fireboxes, fireplaces, furnaces, boilers, stoves, ranges or water heaters that require a UL103 HT chimney system. Ventis Class-A is not listed, nor intended, to be installed with forced draft or positive pressure heating appliances.

Features
  • Used whenever a chimney penetrates a wall, ceiling, or any other surface in your home
  • Listed to UL103HT & ULC S629
  • 304L Inner Pipe
  • Made In The USA
  • Attractive 430 Stainless Steel Mirror Finish On Outer Casing
  • 2" Clearance To Combustibles
Ventis Galvanized Roof Brace- More Than 5' Of Pipe Above The Roof

The Ventis Class-A Chimney system is intended for use with heating appliances utilizing solid fuels, oil, gas (natural or propane) and coal. This includes, but is not limited to, the following appliance types: free standing wood stoves, wood stove inserts, fireboxes, fireplaces, furnaces, boilers, stoves, ranges or water heaters that require a UL103 HT chimney system. Ventis Class-A is not listed, nor intended, to be installed with forced draft or positive pressure heating appliances.

Features
  • Used whenever a chimney penetrates a wall, ceiling, or any other surface in your home
  • Listed to UL103HT & ULC S629
  • 304L Inner Pipe
  • Made In The USA
  • Attractive 430 Stainless Steel Mirror Finish On Outer Casing
  • 2" Clearance To Combustibles
Ventis Galvanized Vented 0-6/12 Flashing With AL Storm Collar

The Ventis Class-A Chimney system is intended for use with heating appliances utilizing solid fuels, oil, gas (natural or propane) and coal. This includes, but is not limited to, the following appliance types: free standing wood stoves, wood stove inserts, fireboxes, fireplaces, furnaces, boilers, stoves, ranges or water heaters that require a UL103 HT chimney system. Ventis Class-A is not listed, nor intended, to be installed with forced draft or positive pressure heating appliances.

Features
  • Used whenever a chimney penetrates a wall, ceiling, or any other surface in your home
  • Listed to UL103HT & ULC S629
  • 304L Inner Pipe
  • Made In The USA
  • Attractive 430 Stainless Steel Mirror Finish On Outer Casing
  • 2" Clearance To Combustibles
Ventis Stainless Storm Collar

The Ventis Class-A Chimney system is intended for use with heating appliances utilizing solid fuels, oil, gas (natural or propane) and coal. This includes, but is not limited to, the following appliance types: free standing wood stoves, wood stove inserts, fireboxes, fireplaces, furnaces, boilers, stoves, ranges or water heaters that require a UL103 HT chimney system. Ventis Class-A is not listed, nor intended, to be installed with forced draft or positive pressure heating appliances.

Features
  • Used whenever a chimney penetrates a wall, ceiling, or any other surface in your home
  • Listed to UL103HT & ULC S629
  • 304L Inner Pipe
  • Made In The USA
  • Attractive 430 Stainless Steel Mirror Finish On Outer Casing
  • 2" Clearance To Combustibles
Ventis Mesh For Standard, Wood, And Wide Open Caps

The Ventis Class-A Chimney system is intended for use with heating appliances utilizing solid fuels, oil, gas (natural or propane) and coal. This includes, but is not limited to, the following appliance types: free standing wood stoves, wood stove inserts, fireboxes, fireplaces, furnaces, boilers, stoves, ranges or water heaters that require a UL103 HT chimney system. Ventis Class-A is not listed, nor intended, to be installed with forced draft or positive pressure heating appliances.

Features
  • Used whenever a chimney penetrates a wall, ceiling, or any other surface in your home
  • Listed to UL103HT & ULC S629
  • 304L Inner Pipe
  • Made In The USA
  • Attractive 430 Stainless Steel Mirror Finish On Outer Casing
  • 2" Clearance To Combustibles
Ventis Attic Insulation Shield

The Ventis Class-A Chimney system is intended for use with heating appliances utilizing solid fuels, oil, gas (natural or propane) and coal. This includes, but is not limited to, the following appliance types: free standing wood stoves, wood stove inserts, fireboxes, fireplaces, furnaces, boilers, stoves, ranges or water heaters that require a UL103 HT chimney system. Ventis Class-A is not listed, nor intended, to be installed with forced draft or positive pressure heating appliances.

Features
  • Used whenever a chimney penetrates a wall, ceiling, or any other surface in your home
  • Listed to UL103HT & ULC S629
  • 304L Inner Pipe
  • Made In The USA
  • Attractive 430 Stainless Steel Mirror Finish On Outer Casing
  • 2" Clearance To Combustibles
Ventis Firestop Radiation Shield

The Ventis Class-A Chimney system is intended for use with heating appliances utilizing solid fuels, oil, gas (natural or propane) and coal. This includes, but is not limited to, the following appliance types: free standing wood stoves, wood stove inserts, fireboxes, fireplaces, furnaces, boilers, stoves, ranges or water heaters that require a UL103 HT chimney system. Ventis Class-A is not listed, nor intended, to be installed with forced draft or positive pressure heating appliances.

Features
  • Used whenever a chimney penetrates a wall, ceiling, or any other surface in your home
  • Listed to UL103HT & ULC S629
  • 304L Inner Pipe
  • Made In The USA
  • Attractive 430 Stainless Steel Mirror Finish On Outer Casing
  • 2" Clearance To Combustibles
Ventis 24 Inch H Square Ceiling Support Box With Universal Pipe Adapter

The Ventis Class-A Chimney system is intended for use with heating appliances utilizing solid fuels, oil, gas (natural or propane) and coal. This includes, but is not limited to, the following appliance types: free standing wood stoves, wood stove inserts, fireboxes, fireplaces, furnaces, boilers, stoves, ranges or water heaters that require a UL103 HT chimney system. Ventis Class-A is not listed, nor intended, to be installed with forced draft or positive pressure heating appliances.

Features
  • Used whenever a chimney penetrates a wall, ceiling, or any other surface in your home
  • Listed to UL103HT & ULC S629
  • 304L Inner Pipe
  • Made In The USA
  • Attractive 430 Stainless Steel Mirror Finish On Outer Casing
  • 2" Clearance To Combustibles
Ventis 11 Inch H Square Ceiling Support Box With Universal Pipe Adapter

The Ventis Class-A Chimney system is intended for use with heating appliances utilizing solid fuels, oil, gas (natural or propane) and coal. This includes, but is not limited to, the following appliance types: free standing wood stoves, wood stove inserts, fireboxes, fireplaces, furnaces, boilers, stoves, ranges or water heaters that require a UL103 HT chimney system. Ventis Class-A is not listed, nor intended, to be installed with forced draft or positive pressure heating appliances.

Features
  • Used whenever a chimney penetrates a wall, ceiling, or any other surface in your home
  • Listed to UL103HT & ULC S629
  • 304L Inner Pipe
  • Made In The USA
  • Attractive 430 Stainless Steel Mirror Finish On Outer Casing
  • 2" Clearance To Combustibles
Ventis 30 Degree Elbow Kit With Support

The Ventis Class-A Chimney system is intended for use with heating appliances utilizing solid fuels, oil, gas (natural or propane) and coal. This includes, but is not limited to, the following appliance types: free standing wood stoves, wood stove inserts, fireboxes, fireplaces, furnaces, boilers, stoves, ranges or water heaters that require a UL103 HT chimney system. Ventis Class-A is not listed, nor intended, to be installed with forced draft or positive pressure heating appliances.

Features
  • Used whenever a chimney penetrates a wall, ceiling, or any other surface in your home
  • Listed to UL103HT & ULC S629
  • 304L Inner Pipe
  • Made In The USA
  • Attractive 430 Stainless Steel Mirror Finish On Outer Casing
  • 2" Clearance To Combustibles
Ventis 15 Degree Elbow Kit With Support

The Ventis Class-A Chimney system is intended for use with heating appliances utilizing solid fuels, oil, gas (natural or propane) and coal. This includes, but is not limited to, the following appliance types: free standing wood stoves, wood stove inserts, fireboxes, fireplaces, furnaces, boilers, stoves, ranges or water heaters that require a UL103 HT chimney system. Ventis Class-A is not listed, nor intended, to be installed with forced draft or positive pressure heating appliances.

Features
  • Used whenever a chimney penetrates a wall, ceiling, or any other surface in your home
  • Listed to UL103HT & ULC S629
  • 304L Inner Pipe
  • Made In The USA
  • Attractive 430 Stainless Steel Mirror Finish On Outer Casing
  • 2" Clearance To Combustibles
Ventis 6 inch Class A Telescoping Pipe

The Ventis Class-A Chimney system is intended for use with heating appliances utilizing solid fuels, oil, gas (natural or propane) and coal. This includes, but is not limited to, the following appliance types: free standing wood stoves, wood stove inserts, fireboxes, fireplaces, furnaces, boilers, stoves, ranges or water heaters that require a UL103 HT chimney system. Ventis Class-A is not listed, nor intended, to be installed with forced draft or positive pressure heating appliances.

Features
  • Used whenever a chimney penetrates a wall, ceiling, or any other surface in your home
  • Listed to UL103HT & ULC S629
  • 304L Inner Pipe
  • 14" - 22" Telescoping Section
  • Made In The USA
  • Attractive 430 Stainless Steel Mirror Finish On Outer Casing
  • 2" Clearance To Combustibles
Ventis 6 Inch Class A Pipe

The Ventis Class-A Chimney system is intended for use with heating appliances utilizing solid fuels, oil, gas (natural or propane) and coal. This includes, but is not limited to, the following appliance types: free standing wood stoves, wood stove inserts, fireboxes, fireplaces, furnaces, boilers, stoves, ranges or water heaters that require a UL103 HT chimney system. Ventis Class-A is not listed, nor intended, to be installed with forced draft or positive pressure heating appliances.

Features
  • Used whenever a chimney penetrates a wall, ceiling, or any other surface in your home
  • Listed to UL103HT & ULC S629
  • 304L Inner Pipe
  • Made In The USA
  • Attractive 430 Stainless Steel Mirror Finish On Outer Casing
  • 2" Clearance To Combustibles
Ventis 12 Inch Class A Pipe

The Ventis Class-A Chimney system is intended for use with heating appliances utilizing solid fuels, oil, gas (natural or propane) and coal. This includes, but is not limited to, the following appliance types: free standing wood stoves, wood stove inserts, fireboxes, fireplaces, furnaces, boilers, stoves, ranges or water heaters that require a UL103 HT chimney system. Ventis Class-A is not listed, nor intended, to be installed with forced draft or positive pressure heating appliances.

Features
  • Used whenever a chimney penetrates a wall, ceiling, or any other surface in your home
  • Listed to UL103HT & ULC S629
  • 304L Inner Pipe
  • Made In The USA
  • Attractive 430 Stainless Steel Mirror Finish On Outer Casing
  • 2" Clearance To Combustibles
Ventis 18 Inch Class A Pipe

The Ventis Class-A Chimney system is intended for use with heating appliances utilizing solid fuels, oil, gas (natural or propane) and coal. This includes, but is not limited to, the following appliance types: free standing wood stoves, wood stove inserts, fireboxes, fireplaces, furnaces, boilers, stoves, ranges or water heaters that require a UL103 HT chimney system. Ventis Class-A is not listed, nor intended, to be installed with forced draft or positive pressure heating appliances.

Features
  • Used whenever a chimney penetrates a wall, ceiling, or any other surface in your home
  • Listed to UL103HT & ULC S629
  • 304L Inner Pipe
  • Made In The USA
  • Attractive 430 Stainless Steel Mirror Finish On Outer Casing
  • 2" Clearance To Combustibles
Ventis 24 Inch Class A Pipe

The Ventis Class-A Chimney system is intended for use with heating appliances utilizing solid fuels, oil, gas (natural or propane) and coal. This includes, but is not limited to, the following appliance types: free standing wood stoves, wood stove inserts, fireboxes, fireplaces, furnaces, boilers, stoves, ranges or water heaters that require a UL103 HT chimney system. Ventis Class-A is not listed, nor intended, to be installed with forced draft or positive pressure heating appliances.

Features
  • Used whenever a chimney penetrates a wall, ceiling, or any other surface in your home
  • Listed to UL103HT & ULC S629
  • 304L Inner Pipe
  • Made In The USA
  • Attractive 430 Stainless Steel Mirror Finish On Outer Casing
  • 2" Clearance To Combustibles
Ventis 36 Inch Class A Pipe

The Ventis Class-A Chimney system is intended for use with heating appliances utilizing solid fuels, oil, gas (natural or propane) and coal. This includes, but is not limited to, the following appliance types: free standing wood stoves, wood stove inserts, fireboxes, fireplaces, furnaces, boilers, stoves, ranges or water heaters that require a UL103 HT chimney system. Ventis Class-A is not listed, nor intended, to be installed with forced draft or positive pressure heating appliances.

Features
  • Used whenever a chimney penetrates a wall, ceiling, or any other surface in your home
  • Listed to UL103HT & ULC S629
  • 304L Inner Pipe
  • Made In The USA
  • Attractive 430 Stainless Steel Mirror Finish On Outer Casing
  • 2" Clearance To Combustibles
Ventis 48 Inch Class A Pipe

The Ventis Class-A Chimney system is intended for use with heating appliances utilizing solid fuels, oil, gas (natural or propane) and coal. This includes, but is not limited to, the following appliance types: free standing wood stoves, wood stove inserts, fireboxes, fireplaces, furnaces, boilers, stoves, ranges or water heaters that require a UL103 HT chimney system. Ventis Class-A is not listed, nor intended, to be installed with forced draft or positive pressure heating appliances.

Features
  • Used whenever a chimney penetrates a wall, ceiling, or any other surface in your home
  • Listed to UL103HT & ULC S629
  • 304L Inner Pipe
  • Made In The USA
  • Attractive 430 Stainless Steel Mirror Finish On Outer Casing
  • 2" Clearance To Combustibles
More Information
Ventis 48 Inch Class A Pipe
SKUVA304-0648
Weight (in lbs)21.000000
Brand/ManufacturerVentis
Resources You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING
Ventis 36 Inch Class A Pipe
SKUVA304-0636
Weight (in lbs)15.000000
Brand/ManufacturerVentis
Resources You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING
Ventis 24 Inch Class A Pipe
SKUVA304-0624
Weight (in lbs)11.000000
Brand/ManufacturerVentis
Resources You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING
Ventis 18 Inch Class A Pipe
SKUVA304-0618
Weight (in lbs)9.000000
Brand/ManufacturerVentis
Resources You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING
Ventis 12 Inch Class A Pipe
SKUVA304-0612
Weight (in lbs)6.000000
Brand/ManufacturerVentis
Resources You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING
Ventis 6 Inch Class A Pipe
SKUVA304-0606
Weight (in lbs)3.000000
Brand/ManufacturerVentis
Resources You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING
Ventis 6 inch Class A Telescoping Pipe
SKUVA304-TEL06
Weight (in lbs)5.000000
Brand/ManufacturerVentis
Resources You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING
Ventis 15 Degree Elbow Kit With Support
SKUVA-EL0615
Weight (in lbs)12.000000
Brand/ManufacturerVentis
Resources You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING
Ventis 30 Degree Elbow Kit With Support
SKUVA-EL0630
Weight (in lbs)12.000000
Brand/ManufacturerVentis
Resources You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING
Ventis 11 Inch H Square Ceiling Support Box With Universal Pipe Adapter
SKUVA-CCS1106
Weight (in lbs)9.000000
Brand/ManufacturerVentis
Resources You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING
Ventis 24 Inch H Square Ceiling Support Box With Universal Pipe Adapter
SKUVA-CCS2406
Weight (in lbs)13.000000
Brand/ManufacturerVentis
Resources You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING
Ventis Firestop Radiation Shield
SKUVA-FS06
Weight (in lbs)7.000000
Brand/ManufacturerVentis
Resources You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING
Ventis Attic Insulation Shield
SKUVA-AIS06
Weight (in lbs)7.000000
Brand/ManufacturerVentis
Resources You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING
Ventis Mesh For Standard, Wood, And Wide Open Caps
SKUVA-CSA06
Weight (in lbs)1.000000
Brand/ManufacturerVentis
Resources You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING
Ventis Stainless Storm Collar
SKUVA-SC06SS
Weight (in lbs)2.000000
Brand/ManufacturerVentis
Resources You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING
Ventis Universal Class A Adapter
SKUVA-UA06
Weight (in lbs)2.000000
Brand/ManufacturerVentis
Resources You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING
Ventis Galvanized Vented 0-6/12 Flashing With AL Storm Collar
SKUVA-F0606
Weight (in lbs)12.000000
Brand/ManufacturerVentis
Resources You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING
Ventis Galvanized Vented 7-12/12 Flashing With AL Storm Collar
SKUVA-F0612
Weight (in lbs)15.000000
Brand/ManufacturerVentis
Resources You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING
Ventis Galvanized Vented Flat Roof Flashing With AL Storm Collar
SKUVA-F06F
Weight (in lbs)12.000000
Brand/ManufacturerVentis
Resources You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING
Ventis Vinyl Siding Kit For Wall Pass Throughs
SKUVA-STK06
Weight (in lbs)3.000000
Brand/ManufacturerVentis
Resources You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING
Ventis 2-6 Inch ADJ Lateral Wall Stand Off (Every 8 ft)
SKUVA-SF06
Weight (in lbs)3.000000
Brand/ManufacturerVentis
Resources You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING
Ventis 12 Inch Wall Pass Through Extension
SKUVA-WPEXT06
Weight (in lbs)5.000000
Brand/ManufacturerVentis
Resources You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING
Ventis 4-8 Inch Wall Pass Through/Thimble
SKUVA-WPT06
Weight (in lbs)6.000000
Brand/ManufacturerVentis
Resources You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING
Ventis Galvanized 2-6 Inch Vertical Wall Support (Every 8 ft)
SKUVA-WS58
Weight (in lbs)3.000000
Brand/ManufacturerVentis
Resources You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING
Ventis Stainless 2-6 Inch Vertical Wall Support (Every 8 ft)
SKUVA-WS58SS
Weight (in lbs)3.000000
Brand/ManufacturerVentis
Resources You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING
Ventis Galvanized Up To 14 Inch Wall Support (Replaces Tee Support)Every 8 ft)
SKUVA-WSE58
Weight (in lbs)10.000000
Brand/ManufacturerVentis
Resources You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING
Ventis Stainless Up To 14 Inch Wall Support (Replaces Tee Support)Every 8 ft)
SKUVA-WSE58SS
Weight (in lbs)10.000000
Brand/ManufacturerVentis
Resources You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING
Ventis 6 Inch Tee Support
SKUVA-TS06
Weight (in lbs)11.000000
Brand/ManufacturerVentis
Resources You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING
Ventis 36 Inch Long Finishing Cover For Wall Pass Throughs
SKUVA-FC0636
Weight (in lbs)8.000000
Brand/ManufacturerVentis
Resources You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING
Ventis 2-1/2 Inch Finishing Cover For Wall Pass Throughs
SKUVA-FC06
Weight (in lbs)8.000000
Brand/ManufacturerVentis
Resources You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING
Ventis 6 Inch Tee With Cap
SKUVA304-T06
Weight (in lbs)4.000000
Brand/ManufacturerVentis
Resources You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING
Ventis Exterior Stainless Steel Wall Pass Through- To Match Stainless Pipe
SKUVA-WPCP06
Weight (in lbs)11.000000
Brand/ManufacturerVentis
Resources You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING
Ventis Galvanized Roof Brace- More Than 5' Of Pipe Above The Roof
SKUVA-RB58
Weight (in lbs)2.000000
Brand/ManufacturerVentis
Resources You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING
Write Your Own Review
You're reviewing:Ventis 6 Inch Class A Pipe And Components
Your Rating
Customer Questions
The lip that comes out of my stove is 6in in the inside and 6in and a 1/4 in on the outside outside will work?
Great question. Unfortunately, this will not work with the dimensions you have provided as the pipe in this kit is 6" inner diameter and 8" Outer diameter. To better assist you in finding the specific part you need, you can either fill out our Parts Quote form, Part Quote Request, or you can call in and speak to one of our experiences customer service representatives at 1-888-346-1036. Thank you and have a wonderful day.
I'm thinking about replacing my chimney in my double wide and curious how long it is?
Hello, length would all depend on the items that you choose within the large selection that we offer. Not everything is included as this product is designed for you to be able to select only the pieces that you need. If you need help putting this together, please feel free to give us a call and we would be happy to further assist you! Thanks.
do you sell 6 inch wall vent kit for a pole buildings , the walls are thin sheet metal.
Yes we do! Please contact our technical sales team for more details. If you have any further questions, please feel free to give us a call! Thanks.
Did you find what you were looking for?