The Ventis Class-A Chimney system is intended for use with heating appliances utilizing solid fuels, oil, gas (natural or propane) and coal. This includes, but is not limited to, the following appliance types: free standing wood stoves, wood stove inserts, fireboxes, fireplaces, furnaces, boilers, stoves, ranges or water heaters that require a UL103 HT chimney system. Ventis Class-A is not listed, nor intended, to be installed with forced draft or positive pressure heating appliances.
Features:
Ventis 11 Inch H Square Ceiling Support Box With Universal Pipe Adapter
Ventis 24 Inch H Square Ceiling Support Box With Universal Pipe Adapter
Ventis 24 Inch Square Ceiling Support Box Extension
Ventis 36 Inch Finishing Cover For Wall Pass Throughs
Ventis 2-1/2 Inch Finishing Cover For Wall Pass Throughs
Ventis 4 to 8 Inch Wall Pass Through/Thimble (Includes Universal Adapter)
Ventis Exterior Stainless Steel Wall Pass Through- To Match Stainless Pipe
Ventis Galvanized 2 - 6 Inch Vertical Wall Support (Every 8 ft)
Ventis Stainless 2 - 6 Inch Vertical Wall Support (Every 8 ft)
Ventis Galvanized Up To 14 Inch Wall Support (Replaces Tee Support)Every 8 ft)
Ventis Stainless Up To 14 Inch Wall Support (Replaces Tee Support)Every 8 ft)
Ventis 2-6 Inch ADJ Lateral Wall Stand Off (Every 8 ft)
Ventis Galvanized Vented Flat Roof Flashing With AL Storm Collar
Ventis Galvanized Vented 0-6/12 Flashing With AL Storm Collar
Ventis Galvanized Vented 7-12/12 Flashing With AL Storm Collar
DuraVent Galvanized Roof Flashing 13-18/12 (3-4 Week Lead Time)
DuraVent Galvanized Roof Flashing 19-24/12 (2-4 Week Lead Time)
DuraVent Dead Soft Aluminum Formable 0-6/12 Flashing
DuraVent Dead Soft Aluminum Formable 7-11/12 Flashing
Ventis Galvanized Peak Flashing (Pitch Required When Ordering)
Ventis Galvanized Roof Brace- More Than 5' Of Pipe Above The Roof
Ventis 304L Stainless Roof Brace- More Than 5' Of Pipe Above The Roof
Ventis Mesh For Standard, Wood, And Wide Open Caps
Ventis 8 Inch Class A Pipe And Components | |
---|---|
Brand/Manufacturer | Ventis |
Material | 304 Stainless Steel |
Type | Class A Chimney |
Certification | UL 103HT |
Diameter | 8 Inches |
Warranty | Limited Lifetime |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
Safety Information | PROPOSITION 65 WARNING |