1.5 Ton 13 SEER 80% AFUE 40,000 BTU Goodman Gas Furnace and Air Conditioner System - Horizontal

OVERVIEW

If you’re looking to reduce your energy bill and improve the comfort of your home, look no further than Goodman’s GCES800403AN. This gas furnace features efficient operation and high-quality construction to provide your home with reliable, affordable heating. The GCES800403AN single-stage, multi-speed furnace is a great value designed for many applications.

QUICK FACTS

• This furnace is ideal to heat a smaller house (depending on climate)
• 40,000 BTU 80% efficient natural gas furnace
• Requires metal flue venting
• Can be used in the downflow or horizontal orientation
• Can be converted to an LP furnace with a conversion kit (sold separately)
• Innovative design for electrical efficiency, safety, and lower sound output

40,000 BTU

The GCES800403AN Goodman gas furnace is suitable in output for a small house in ideal climate conditions. At 40,000 BTU’s, this furnace size is the smallest furnace that Goodman has to offer. The BTU count is the input per hour of the furnace, and the output is 32,000 BTU’s (40,000 x 80% AFUE) per hour.

80% Efficiency Rating

The GCES800403AN Goodman gas furnace has the basic efficiency rating in furnaces on the market today. At 80% efficient, the furnace loses only 20% of fuel going into it to normal furnace operation, and the remaining 80% is used to heat your house. All 80% furnaces such as this one require metal flue venting, and furnaces that are 90% efficient or higher require plastic/pvc flue venting.

Please note that this furnace does not comply with California Low NOx or Ultra-Low NOx regulations. For the Low NOx equivalent of this furnace, click here. If you have any questions, please contact us.

A single stage furnace operates using the same amount of energy every time is turns on. The GCES800403AN Goodman gas furnace operates using only one heat output. This furnace will operate at 100% output whenever it is operating.

From the factory, the GCES800403AN runs on natural gas. However all Goodman gas furnaces can be converted to propane using the furnace’s corresponding LP conversion kit, an optional accessory at an additional cost that consists of a replacement set of orifices and springs.

The GCES800403AN utilizes a multi-speed ECM motor, which is more efficient than older PSC blower motors, saving you money in electric bills.

With installation that follows your state and local codes and with online registration, all Goodman furnaces come with a 10-year parts and lifetime heat exchanger warranty through the manufacturer.

Instead of a standing pilot light, the GCES800403AN has a newer, more efficient hot surface igniter. Hot surface igniters are much more efficient and safer than standard standing pilot lights.

The Goodman brand has improved technology from years of production experience, allowing for a long-lasting product that rarely runs into any operation-based problems. However, if the furnace does need maintenance or warranty work, the control board has a set of sensors that will identify any basic problems in the furnace’s basic operation.

The GCES800403AN Goodman gas furnace has a durable outer cabinet. The heavy-gauge steel used in the furnace’s design allows for a more protected interior, and less air leakage from the furnace’s operation, resulting in a more quiet operation while still decreasing operation costs.

From enhanced operation to efficiency, the Goodman gas furnaces have a lot to offer. However, Goodman’s features don’t stop at quality of unit. The GCES800403AN allows for a significantly more streamlined installation process with its universal design, consisting of its ability to be installed in either downflow or horizontal configurations, lowering labor costs.

OVERVIEW

The Goodman GSX130181 is a cooling-only condenser unit. Providing a 13 SEER efficiency with a single stage, reciprocating compressor, the GSX130181 is an inexpensive condenser to cool your home when paired with an AC coil.

QUICK FACTS

• Ideal size to cover a smaller house
• 1.5 ton, 13 SEER AC-only condenser
• Low sound output
• Fully charged for up to 15' of line set
• Factory-installed filter drier

1.5 ton

The GSX130181 condenser is a 1.5 ton AC only unit. In an ideal climate situation, the GSX130181 can usually cover a smaller house. For this unit to function, an indoor air handler or coil is required, and this unit is cooling only with no heating capacity on its own.

13 SEER

The Goodman GSX130181 AC condenser is designed to be 13 SEER. This is the lowest efficiency on the market today, making it an inexpensive option for northern states. Please note that this product is regulated by DOE Efficiency Standards.

Due to new efficiency requirements, this unit cannot be installed in the following states: Alabama, Arizona, Arkansas, California, Delaware, Florida, Georgia, Kentucky, Louisiana, Maryland, Mississippi, Nevada, New Mexico, North Carolina, Oklahoma, South Carolina, Tennessee, Texas, and Virginia.

Warranty

The GSX130181 condenser comes with Goodman's standard 10 year parts warranty with online registration through the manufacturer. An installation that follows your state and local codes is required for the warranty to be upheld.

Durability and Reliability

With an enhanced copper tube and aluminum fin coil, the GSX130181 is designed to prevent coil degradation. With the baked-on powder-paint finish, the condenser's heavy-gauge galvanized-steel cabinet is approved for up to 500 hours of salt-spray. The factory-installed filter dryer lowers general wear-and-tear on the unit. All of these features provide you with a durable, reliable condenser to be used whenever you need to cool your home.

Installation and Maintenance

The Goodman GSX130181 AC condenser comes standard with service valves that have sweat connections and easy-access gauge ports, both providing a lower installation difficulty and time to lower installation costs. The outer casing has both a top and a side access to allow for easier maintenance and warranty access when necessary.

Comfort in Mind

The Goodman brand always has its customer's comfort in mind. The GSX130181 is no exception, with not only using high-quality components but also providing enhanced sound-dampening features that allows the brand to manufacture some of the lowest sound output levels in the industry.

OVERVIEW

The Goodman CHPF1824A6 evaporator coil is designed for any installations that the coil needs to sit on its side, in the horizontal position. With its enhanced comfort and superior efficiency design, the CHPF1824A6 is an inexpensive yet quality choice for you.

QUICK FACTS

• 1.5 to 2 ton evaporator coil
• Installable in the horizontal configuration
• Usable with either a heat pump or an AC-only condenser
• Works with R410A or R22 refrigerant
• Low air leakage
• Check flowrater expansion device for use in any application

1.5 to 2 Tons

At an output of 1.5 to 2 tons, the Goodman CHPF1824A6 evaporator coil is ready for almost any horizontal installation at that size. In many situations, a condenser that is paired with the condenser is going to be smaller than this coil. This is intentional and is to maintain the overall unit’s efficiency.
Please note that for this coil to function, a furnace or blower and a condenser is required, all sold separately. This coil is not designed to replace a coil in a single-piece air handler.

Warranty

The CHPF1824A6 coil is covered under Goodman’s standard 10 year parts warranty when the unit is installed following your state and local codes, the coil is paired with a compatible R410A condenser, and the entire system is registered online through the manufacturer.

The Goodman CHPF1824A6 evaporator coil is designed with a durable outer casing and a rust-resistant drain pan to lower general wear and tear to make sure the coil works for years to come. To ease installation, the unit is designed to be slim and able to fit in many crawl spaces and attics, and with its foil-face insulation making the unit’s air leakage minimal, installation location does not necessarily have to be insulated for normal temperature operations. For maintenance, the coil has a split-seam on the front of it for easier access.