COMPETITIVE PRICING
We sell products at wholesale pricing. No markups, no hidden fees. Our average customer saves BETWEEN THREE TO SIX THOUSAND DOLLARS
-That's the Direct Advantage!
Out of stock
AHRI Number:201510393
This Goodman system provides 1.5 Ton of cooling, 40,000 BTU of heating, and acheives 14.5 SEER. These features make it a perfect choice for your next system.
The Goodman GCEC960403BN furnace features a two stage gas valve and multi-speed blower motor that can be installed in either downflow or horizontal configurations. This furnace also features a X13 blower motor that saves electricity during the heating and cooling months. This direct current motor uses less electricity than the standard multi-speed furnace blower. This furnace also includes a patented aluminized-steel tubular heat exchanger and durable Silicon Nitride Hot Surface Ignition system. These furnaces are run-tested for heating or combination heating and cooling applications. With a heavy-gauge, reinforced, insulated steel cabinet and durable baked enamel finish, this unit can be installed in a variety of locations. Not intended for use in mobile homes.
The Goodman GCEC960403BN furnace has a 96% AFUE rating which means that for every every $1.00 you spend, 96 cents goes towards heating your home.
Furnace Features
Goodman AC - The GSX140181 Goodman Air Conditioner Condenser uses the chlorine-free refrigerant R-410A to help prevent damage to the Ozone Layer. This air conditioner 1.5 TON is equipped with sound-dampening features to provide operating sound levels are among the lowest in the heating and cooling industry. Using high-quality components,the Goodman GSX140181 air conditioner condenser an be either 14 or 15 SEER depending on which indoor unit it is paired with. If it is installed with the manufacturer-recommended evaporator coil, variable speed furnace, variable speed air handler, or variable speed modular blower, and also sometimes a thermostatic expansion valve (TXV), it is a 15 SEER system.
Please note that this product is regulated by DOE Efficiency Standards.
This unit cannot be shipped or installed in the following states: Arizona, California, Nevada, and New Mexico
Click here to see the unit that is available in these states.
For more information about state efficiency requirements, please click here.
The Goodman CHPF3636B6 evaporator coil is designed for any installations that the coil needs to sit on its side, in the horizontal position. With its enhanced comfort and superior efficiency design, the CHPF3636B6 is an inexpensive yet quality choice for you.
At an output of 3 tons, the Goodman CHPF3636B6 evaporator coil is ready for almost any horizontal installation at that size. In many situations, a condenser that is paired with the condenser is going to be smaller than this coil. This is intentional and is to maintain the overall unit’s efficiency. Please note that for this coil to function, a furnace or blower and a condenser is required, all sold separately. This coil is not designed to replace a coil in a single-piece air handler.
The CHPF3636B6 coil is covered under Goodman’s standard 10 year parts warranty when the unit is installed following your state and local codes, the coil is paired with a compatible R410A condenser, and the entire system is registered online through the manufacturer.
The Goodman CHPF3636B6 evaporator coil is designed with a durable outer casing and a rust-resistant drain pan to lower general wear and tear to make sure the coil works for years to come. To ease installation, the unit is designed to be slim and able to fit in many crawl spaces and attics, and with its foil-face insulation making the unit’s air leakage minimal, installation location does not necessarily have to be insulated for normal temperature operations. For maintenance, the coil has a split-seam on the front of it for easier access.
The Goodman brand consistently brings efficiency and other cost-saving benefits and technology to their furnace. The GCEC960403BN gas furnace is no exception to Goodman’s ingenuity in design, bringing you comfort at a high efficiency for any downflow or horizontal application.
Heating up to a smaller house in average environmental conditions, the GCEC960403BN Goodman furnace has an input of 40,000 BTU’s and an output of 38,400 BTU’s (input X efficiency rating = output).
The GCEC960403BN gas furnace is 96% efficient. This efficiency means that 4% of the fuel going into the furnace is lost out of the flue venting, while 96% of the fuel is actually used to heat your home. As a condensing furnace, this furnace will need to be vented with plastic or PVC flue venting. If you are looking for a furnace that requires metal flue venting, you would need an 80% efficient furnace.
With a two stage burner, the GCEC960403BN provides two heating outputs: one at a 60% heating output for warmer days and one at a 100% output for when you need the furnace most. The furnace also has a multi speed ECM motor instead of an inefficient PSC motor. Both of these upgrades provide a better efficiency with a more stable output to better heat your home through all seasons of use.
With installation that follows your state and local codes, the GCEC960403BN gas furnace comes with a 10-year parts and lifetime heat exchanger warranty when registered online through Goodman.
The outer casing on the GCEC960403BN gas furnace is heavy-gauge steel with enhanced insulated for better protection and lower air leakage and sound output, providing more comfort to your home. The new hot surface ignitor replaces the standing pilot light for a more efficient startup.
The cost-saving benefits of the Goodman brand doesn’t stop at efficiency. The GCEC960403BN Goodman furnace can be installed in either the downflow or horizontal orientation, making this furnace an ideal choice for multiple installation applications. Naturally, the GCEC960403BN comes with natural gas valves built in. However, increasing its installation potential, the GCEC960403BN can be field converted with the LP conversion kit (found here, for an extra fee) if you need it to be propane. Not only does the Goodman brand save you money on installation costs, but also with maintenance and warranty work. In the event of a rare warranty issue, the self-diagnostic control board alerts you and your serviceman what is wrong with the unit for most basic issues for a faster solution to almost any problem.
Goodman's TXV valves are designed to improve the reliability and efficiency of your central split system. With the TX2N4A, you can be assured that your one-and-a-half or two ton system is getting the proper refrigerant flow, even through changing conditions. Since this valve is installed externally, it is easy to service and maintain. If you're looking to improve the efficiency and performance of your system, the TX2N4A is a good start.
Please note that this is not an exhaustive list. Use Ctrl+F to simplify your search. This part is compatible with the following models:
GSX130181 GSX130241 DSXC160241 GSZ130181 GSZ130241 SSZ140181 SSZ140241 SSZ160241 DSZC160241 CAPF1824*6 CAUF1824*6 CHPF1824A6 CSCF1824N6
1.5 Ton 14 SEER Goodman Air Conditioner Condenser | |
---|---|
SKU | GSX140181 |
Weight (in lbs) | 146.000000 |
Brand/Manufacturer | Goodman |
Cooling BTU | 18,000 |
Decibel Level (dBA) | 71 |
Energy Star | No |
Refrigerant | R410A |
SEER1 (Efficiency) | 14 |
Condenser Stages | Single Stage |
Compressor Type | Rotary |
Liquid Line | 3/8" |
Liquid Valve Size | 3/8" |
Suction Valve Size | 3/4" |
Electrical | 208 / 230 V. 1 Phase 60 Hz |
Max Breaker Size | 30 amps |
Min. Breaker Size | 12 amps |
Tonnage | 1.5 Ton |
Height | 27.5" |
Width | 26" |
Depth | 26" |
Warranty | 10 Years with Online Registration |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
Safety Information | PROPOSITION 65 WARNING |
1.5 Ton ACIQ Hybrid Upgrade | |
SKU | ACIQ-2X-EHPB-UPG |
Weight (in lbs) | 120.000000 |
Brand/Manufacturer | ACiQ |
Refrigerant | R410A |
Safety Information | PROPOSITION 65 WARNING |
3 Ton 17.5" Goodman Horizontal Evaporator Cased Coil | |
SKU | CHPF3636B6 |
Weight (in lbs) | 50.000000 |
Brand/Manufacturer | Goodman |
Configuration | Horizontal |
Refrigerant | R410A or R22 |
Liquid Line | 3/8" |
Suction Line | 7/8" |
Tonnage | 3 Ton |
Style | A-Coil |
Height | 21.125" |
Width | 17.5" |
Depth | 26" |
Warranty | 10 Years with Online Registration |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
Safety Information | PROPOSITION 65 WARNING |
40,000 BTU 96% AFUE 2 Stage Goodman Gas Furnace - Downflow/Horizontal | |
SKU | GCEC960403BN |
Weight (in lbs) | 112.000000 |
Airflow Direction | Downflow/Horizontal |
Exhaust Flue Requirement | Plastic / PVC |
Brand/Manufacturer | Goodman |
Furnace Efficiency / AFUE | 96% |
Heating BTU | 40,000 |
Blower Motor | Multi-Speed - ECM |
Maximum CFM | 1200 |
Configuration | Downflow/Horizontal |
Energy Star | Yes |
Electrical | 115 V. 1 Phase 60 Hz |
Burner Stages | Two |
Fuel Type | Gas |
Height | 34.5" |
Width | 17.5" |
Depth | 28.75" |
Warranty | 10 Years with Online Registration |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
Safety Information |
This gas appliance requires a trained technician to install. Improperly connecting gas lines or improperly connecting a gas flue or venting may result in death. By purchasing this item, you are agreeing that you are using a trained technician to install this gas appliance. We will not be responsible for any injury or property damage arising from improper service or service procedures. Whoever installs or services this unit assumes responsibility for any personal injury or property damage which may result. Many jurisdictions require a license to install this equipment.
PROPOSITION 65 WARNING |
Goodman 1.5 to 2 Ton TXV Kit - R-410A | |
SKU | TX2N4A |
Weight (in lbs) | 2.500000 |
Brand/Manufacturer | Goodman |
Refrigerant | R410A |
Safety Information | PROPOSITION 65 WARNING |
No Thank You | |
SKU | NOTHANKYOU |
Weight (in lbs) | 120.000000 |