OVERVIEW
The ACiQ AQ-GPUM33006031 is a gas heat and electric AC packaged unit, ready for any application where it is not convenient to have an indoor furnace or air handler. At 13.4 SEER2 and 80% AFUE, the AQ-GPUM33006031 is an inexpensive option with a standard efficiency designed for rooftop and next-to-building applications.
QUICK FACTS
- 2.5 ton, 60,000 BTU packaged unit
- 13.4 SEER2, 80% AFUE
- Downflow or horizontal discharge installation options
- Fully charged and ready to install
- Low sound output
- Ultra-Low NOx compliant
2.5 ton, 60,000 BTU
The ACiQ AQ-GPUM33006031 provides 2.5 tons of electric air conditioning as well as 60,000 BTU of natural gas heating to your home, providing comfort to your home year-round. While it comes from the factory with a natural gas valve setup, a propane conversion kit is available at an additional cost to be field-installed.
13.4 SEER2, 80% AFUE
On the air conditioning side, the AQ-GPUM33006031 packaged unit is 13.4 SEER2, or the national standard efficiency for AC units. The heating side of the unit is 80% efficient, meaning that 81 cents on every dollar that you spend on your home's heating gas bill will be used to heat your home, and the remaining 19 cents is lost to normal heating operations and is lost out of the flue venting. Both of these efficiency ratings make the AQ-GPUM33006031 packaged unit a universal option, as it is acceptable to install nationwide.
Ultra-low NOx gas packaged units are only available in natural gas configurations. If you need a propane gas packaged unit, you will need to order the regular version of this packaged unit and add a propane conversion kit to it. You can find the regular version here: GPGM33006041
Warranty
ACiQ provides a 10 year parts warranty and a whopping 20 year heat exchanger warranty. Please note that the unit must be installed following your state and local codes and the unit must be registered online through the manufacturer for the warranty to be upheld.
Durability and Reliability
The exterior of the ACiQ AQ-GPUM33006031 is durable with its heavy-gauge steel design and superior noise isolation insulation. The unit also meets Florida building code unit integrity requirements for hurricane-type weather when properly anchored. For reliability, the unit's blower motor is completely sealed and permanently lubricated. The evaporator coil is also all-aluminum and the redundant gas valve is accompanied by a power-assisted combustion, all increasing reliability and durability and providing a peace of mind that your unit will work whenever you need it.
Installation and Maintenance
The ACiQ AQ-GPUM33006031 packaged unit uses natural gas out of the box, but a propane conversion kit can be purchased separately and field-installed if required. For ease of installation, the AQ-GPUM33006031 is precharged from the factory with all required refrigerant, decreasing materials costs. The unit can be installed in a horizontal or downflow configuration for whether you need it to be on the roof or next to the building.
Comfort in Mind
The ACiQ brand has always been focused on bringing an inexpensive yet superior comfort and efficiency to your home. The AQ-GPUM33006031 balances this perfectly, with its exceptional soundproofing and self-contained nature bringing you comfort and efficiency to an easy-to-install design.
