COMPETITIVE PRICING
We sell products at wholesale pricing. No markups, no hidden fees. Our average customer saves BETWEEN THREE TO SIX THOUSAND DOLLARS
-That's the Direct Advantage!
In stock
Save up to 70% off Local HVAC Prices
A Goodman combination system is a great choice to keep your home warm all season long. With tons of extra features and a great price, the GMEC800603AN is a perfect choice for heating.
Not intended for use in mobile homes.
The Goodman CHPF1824A6 evaporator coil is designed for any installations that the coil needs to sit on its side, in the horizontal position. With its enhanced comfort and superior efficiency design, the CHPF1824A6 is an inexpensive yet quality choice for you.
At an output of 1.5 to 2 tons, the Goodman CHPF1824A6 evaporator coil is ready for almost any horizontal installation at that size. In many situations, a condenser that is paired with the condenser is going to be smaller than this coil. This is intentional and is to maintain the overall unit’s efficiency. Please note that for this coil to function, a furnace or blower and a condenser is required, all sold separately. This coil is not designed to replace a coil in a single-piece air handler.
The CHPF1824A6 coil is covered under Goodman’s standard 10 year parts warranty when the unit is installed following your state and local codes, the coil is paired with a compatible R410A condenser, and the entire system is registered online through the manufacturer.
The Goodman CHPF1824A6 evaporator coil is designed with a durable outer casing and a rust-resistant drain pan to lower general wear and tear to make sure the coil works for years to come. To ease installation, the unit is designed to be slim and able to fit in many crawl spaces and attics, and with its foil-face insulation making the unit’s air leakage minimal, installation location does not necessarily have to be insulated for normal temperature operations. For maintenance, the coil has a split-seam on the front of it for easier access.
The Goodman GSX130241 is a cooling-only condenser unit. Providing a 13 SEER efficiency with a single stage, reciprocating compressor, the GSX130241 is an inexpensive condenser to cool your home when paired with an AC coil.
The GSX130241 condenser is a 2 ton AC only unit. In an ideal climate situation, the GSX130241 can usually cover a smaller house. For this unit to function, an indoor air handler or coil is required, and this unit is cooling only with no heating capacity on its own.
The Goodman GSX130241 AC condenser is designed to be 13 SEER. This is the lowest efficiency on the market today, making it an inexpensive option for northern states. Please note that this product is regulated by DOE Efficiency Standards.
Due to new efficiency requirements, this unit cannot be installed in the following states: Alabama, Arizona, Arkansas, California, Delaware, Florida, Georgia, Kentucky, Louisiana, Maryland, Mississippi, Nevada, New Mexico, North Carolina, Oklahoma, South Carolina, Tennessee, Texas, and Virginia.
The GSX130241 condenser comes with Goodman's standard 10 year parts warranty with online registration through the manufacturer. An installation that follows your state and local codes is required for the warranty to be upheld.
With an enhanced copper tube and aluminum fin coil, the GSX130241 is designed to prevent coil degradation. With the baked-on powder-paint finish, the condenser's heavy-gauge galvanized-steel cabinet is approved for up to 500 hours of salt-spray. The factory-installed filter dryer lowers general wear-and-tear on the unit. All of these features provide you with a durable, reliable condenser to be used whenever you need to cool your home.
The Goodman GSX130241 AC condenser comes standard with service valves that have sweat connections and easy-access gauge ports, both providing a lower installation difficulty and time to lower installation costs. The outer casing has both a top and a side access to allow for easier maintenance and warranty access when necessary.
The Goodman brand always has its customer's comfort in mind. The GSX130241 is no exception, with not only using high-quality components but also providing enhanced sound-dampening features that allows the brand to manufacture some of the lowest sound output levels in the industry.
The GMEC800603AN Goodman gas furnace features high-quality construction and efficient operation at a great value. The GMEC800603AN two-stage, multi-speed furnace utilizes Goodman's superior heat exchanger design to provide efficient, reliable heating to your home. If you're looking to cut your energy bills and improve your comfort without breaking the bank, your search stops with the Goodman GMEC800603AN.
The GMEC800603AN Goodman gas furnace is 60,000 BTU’s. This BTU count is a measure of the input of the furnace per hour, while the output of this furnace is 48,000 BTU’s (60,000 X 80% AFUE) per hour. In ideal climate conditions, this 60,000 BTU furnace is usually used to heat a medium-sized house.
The GMEC800603AN Goodman gas furnace is 80% efficient, and the standard furnace efficiency on the market today. This means that 80% of the gas going into the furnace is used to heat your home and the remaining 20% is lost out of the flue venting. Please note that all 80% furnaces must be vented using metal flue venting, while anything higher than 90% efficient must be vented using plastic/PVC venting. Please note that this furnace does not comply with California Low NOx or Ultra-Low NOx regulations. For the Low NOx equivalent of this furnace, click here. If you have any questions, please contact us.
The GMEC800603AN Goodman gas furnace is a two stage furnace that has two heating outputs on the burner: full output on colder winter days and a lower output for milder days that the furnace doesn’t have to run quite as much. Two stage furnaces allow for a more even heat distribution, as the furnace will only kick on the higher stage if the indoor temperature is more than a few degrees away from the desired temperature. Since the lower stage will be used more often, the GMEC800603AN will run quieter than a single stage system. While the majority of the benefits of a two stage feature on a furnace are comfort based, the efficiency of the furnace is slightly higher due to it burning less fuel at its lower stage.
From the factory, the GMEC800603AN runs on natural gas. However all Goodman gas furnaces can be converted to propane using the furnace’s corresponding LP conversion kit, an optional accessory at an additional cost that consists of a replacement set of orifices and springs.
Instead of the last generation PSC blower motor, the GMEC800603AN utilizes a multi-speed ECM motor, which uses less power and provides smarter air circulation. All of this causes an overall increase in the electrical efficiency of your furnace, which saves you money.
With installation that follows your state and local codes and with online registration, all Goodman GMEC80 series furnaces come with a 10-year parts, 10-year unit replacement, and lifetime heat exchanger warranty through the manufacturer.
The hot surface igniter on modern Goodman furnaces are more durable than previous designs, decreasing related issues and lowering maintenance costs. These hot surface ignitors are also more efficient than standing pilot and older HSI designs, saving you even more money.
The Goodman brand has improved technology from years of production experience, allowing for a long-lasting product that rarely has any issues. However, if something does go wrong on the furnace, the control board has a set of sensors that allow it to diagnose basic issues, allowing for easy troubleshooting and to notify the owner if basic maintenance or warranty work is recommended. This increases the overall safety of the unit, for the furnace itself and the occupants of the home where it is installed.
The heavy-gauge steel cabinet on new Goodman furnaces provide adequate protection to the internal mechanisms of the unit. The cabinet is also more air-tight than previous models, allowing for a quiet, more economical unit due to losing less heat and preventing more sound from exiting the unit.
The value of modern Goodman furnaces doesn't end at efficiency. Today’s Goodman furnaces feature many different connection options to reduce installation. The GMEC800603AN model has a more universal design, which consists of its ability to be installed in both an upflow or horizontal configuration. This allows for an easier installation in more locations, from your attic to your basement. The furnace also comes with color-coded low-voltage terminals that allow for a shorter and easier installation time, which decreases installation costs.
1.5 to 2 Ton 14" Goodman Horizontal Evaporator Cased Coil | |
---|---|
SKU | CHPF1824A6 |
Weight (in lbs) | 36.000000 |
Brand/Manufacturer | Goodman |
Configuration | Horizontal |
Refrigerant | R410A or R22 |
Liquid Line | 3/8" |
Suction Line | 3/4" |
Tonnage | 2 Ton |
Style | A-Coil |
Height | 14" |
Width | 21.125" |
Depth | 26" |
Warranty | 10 Years with Online Registration |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
Safety Information | PROPOSITION 65 WARNING |
2 Ton 13 SEER Goodman Air Conditioner Condenser | |
SKU | GSX130241 |
Weight (in lbs) | 128.000000 |
Brand/Manufacturer | Goodman |
Replaces | GSX130242 |
Cooling BTU | 24,000 |
Decibel Level (dBA) | 75 |
Energy Star | No |
Refrigerant | R410A |
SEER1 (Efficiency) | 13 |
Condenser Stages | Single Stage |
Compressor Type | Rotary |
Liquid Line | 3/8" |
Suction Line | 3/4" |
Liquid Valve Size | 3/8" |
Electrical | 208 / 230 V. 1 Phase 60 Hz |
Max Breaker Size | 15 amps |
Min. Breaker Size | 10.3 amps |
Tonnage | 2 Ton |
Valve Type | Sweat |
Height | 27.5" |
Width | 26" |
Depth | 26" |
Warranty | 10 Years with Online Registration |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
Safety Information | PROPOSITION 65 WARNING |
2 Ton ACiQ Hybrid Upgrade | |
SKU | ACIQ-24-EHPB-UPG |
Weight (in lbs) | 120.000000 |
Brand/Manufacturer | ACiQ |
Refrigerant | R410A |
Safety Information | PROPOSITION 65 WARNING |
60,000 BTU 80% AFUE Multi-Speed Two Stage Goodman Gas Furnace - Upflow/Horizontal | |
SKU | GMEC800603AN |
Weight (in lbs) | 107.000000 |
Airflow Direction | Upflow/Horizontal |
Exhaust Flue Requirement | Metal |
Brand/Manufacturer | Goodman |
Replaces | GMVC800603BN, GMVC800603BX, GMVC800604BN, GMVC800604BX, GMVC800803BN, GMVC80603BN, GMVC80603BX, GMVC80604BN, GMVC80604BX, GCVC800603BX, GCVC80603BX, GM9C800603AX, GM9C800603BX, GC9C800603AX, GC9C800603BX, GMES800603AU, GMES800604BU, GM9S800603AU, GM9S800603AX, GM9S800603BX, GM9S800604BU, GM9S800604BX, GMVS800604BU, GC9S800603AX, GMS80603AN, GMS80603AX, GMS80604BN, GMS80604BX, GHS80604BN, GHS80604BX, GDS80603AN, GDS80603AX, GME80603BN, GME80603BX, GMH80603AN, GMH80603AX, GMH80604BN, GMH80604BX |
Furnace Efficiency / AFUE | 80% |
Heating BTU | 60,000 |
Blower Motor | Multi Speed - ECM |
Maximum CFM | 1400 |
Configuration | Upflow/Horizontal |
Electrical | 115 V. 1 Phase 60 Hz |
Burner Stages | Two |
Fuel Type | Propane, Natural Gas |
Height | 33 3/8" |
Width | 14" |
Depth | 28" |
Warranty | Lifetime Heat Exchanger, 10 Years Unit Replacement, and 10 Years Parts with Online Registration |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
Safety Information |
This gas appliance requires a trained technician to install. Improperly connecting gas lines or improperly connecting a gas flue or venting may result in death. By purchasing this item, you are agreeing that you are using a trained technician to install this gas appliance. We will not be responsible for any injury or property damage arising from improper service or service procedures. Whoever installs or services this unit assumes responsibility for any personal injury or property damage which may result. Many jurisdictions require a license to install this equipment.
PROPOSITION 65 WARNING |
No Thank You | |
SKU | NOTHANKYOU |
Weight (in lbs) | 120.000000 |