3.5 Ton 14.5 SEER 80% AFUE 100,000 BTU Goodman Gas Furnace and Heat Pump System - Downflow

OVERVIEW

If you’re looking to reduce your energy bill and improve the comfort of your home, look no further than Goodman’s GCES801005CN. This gas furnace features efficient operation and high-quality construction to provide your home with reliable, affordable heating. The GCES801005CN single-stage, multi-speed furnace is a great value designed for many applications.

QUICK FACTS

• This furnace is ideal to heat a smaller house (depending on climate)
• 100,000 BTU 80% efficient natural gas furnace
• Requires metal flue venting
• Can be used in the downflow or horizontal orientation
• Can be converted to an LP furnace with a conversion kit (sold separately)
• Innovative design for electrical efficiency, safety, and lower sound output

100,000 BTU

The GCES801005CN Goodman gas furnace is suitable in output for a small house in ideal climate conditions. The BTU count is the input per hour of the furnace, and the output is 80,000 BTU’s (100,000 x 80% AFUE) per hour.

80% Efficiency Rating

The GCES801005CN Goodman gas furnace has the basic efficiency rating in furnaces on the market today. At 80% efficient, the furnace loses only 20% of fuel going into it to normal furnace operation, and the remaining 80% is used to heat your house. All 80% furnaces such as this one require metal flue venting, and furnaces that are 90% efficient or higher require plastic/pvc flue venting.

Please note that this furnace does not comply with California Low NOx or Ultra-Low NOx regulations. For the Low NOx equivalent of this furnace, click here. If you have any questions, please contact us.

A single stage furnace operates using the same amount of energy every time is turns on. The GCES801005CN Goodman gas furnace operates using only one heat output. This furnace will operate at 100% output whenever it is operating.

From the factory, the GCES801005CN runs on natural gas. However all Goodman gas furnaces can be converted to propane using the furnace’s corresponding LP conversion kit, an optional accessory at an additional cost that consists of a replacement set of orifices and springs.

The GCES801005CN utilizes a multi-speed ECM motor, which is more efficient than older PSC blower motors, saving you money in electric bills.

With installation that follows your state and local codes and with online registration, all Goodman furnaces come with a 10-year parts and lifetime heat exchanger warranty through the manufacturer.

Instead of a standing pilot light, the GCES801005CN has a newer, more efficient hot surface igniter. Hot surface igniters are much more efficient and safer than standard standing pilot lights.

The Goodman brand has improved technology from years of production experience, allowing for a long-lasting product that rarely runs into any operation-based problems. However, if the furnace does need maintenance or warranty work, the control board has a set of sensors that will identify any basic problems in the furnace’s basic operation.

The GCES801005CN Goodman gas furnace has a durable outer cabinet. The heavy-gauge steel used in the furnace’s design allows for a more protected interior, and less air leakage from the furnace’s operation, resulting in a more quiet operation while still decreasing operation costs.

From enhanced operation to efficiency, the Goodman gas furnaces have a lot to offer. However, Goodman’s features don’t stop at quality of unit. The GCES801005CN allows for a significantly more streamlined installation process with its universal design, consisting of its ability to be installed in either downflow or horizontal configurations, lowering labor costs.

OVERVIEW

With the CAPF4860C6 evaporator coil, Goodman provides an enhanced comfort to your home. With its ability to work with AC-only systems or with heat pumps and its ability to be installed in both the upflow or downflow orientations, the CAPF4860C6 is designed to be versatile in design and to provide an efficient comfort at a low cost.

QUICK FACTS

• 4 to 5 ton evaporator coil
• Installable in the upflow or downflow configurations
• Usable with either a heat pump or an AC-only condenser
• Low air leakage
• Check flowrater expansion device for use in any application

4 to 5 Tons

The Goodman CAPF4860C6 evaporator coil is rated for a 4 to 5 ton output. In many system configurations, this coil may be larger in tonnage than its paired condenser. This is intentional, to maintain the overall efficiency of the entire system.
Please note that in order for this coil to function, a furnace or blower and a condenser is required, all sold separately.

Warranty

The CAPF4860C6 coil is covered under Goodman’s standard 10 year parts warranty when the unit is installed following your state and local codes, the coil is paired with a compatible condenser, and the entire system is registered online through the manufacturer.

The Goodman CAPF4860C6 evaporator coil is able to be installed in upflow and downflow applications. With its rust-resistant, thermoplastic drain plan, water retention rate is significantly lower than previous models. For even more enhanced durability, the cabinet is made of a strong galvanized-steel with a leather-grain finish. If you ever need to perform maintenance on your coil, there is a split-seam on the front of the casing for easy internal access.
Please note that this coil will not work as a replacement for any single-piece air handler coils.

The CAPF4860C6 evaporator coil’s foil-faced insulation lowers air leakage, increasing the amount of air flow going into your ductwork, keeping you more comfortable while decreasing the unit’s run time. With compatible equipment, the CAPF4860C6 evaporator coil lives up to Goodman’s enhanced comfort and efficiency standards at a reasonable price.