1-800-397-1392
Today's Hours 8am - 9pm est
AHRI Number:203462869
A Goodman combination system is a great choice to keep your home warm all season long. With tons of extra features and a great price, the GCES801005CN is a perfect choice for heating.
Not intended for use in mobile homes.
If you’re looking to reduce your energy bill and improve the comfort of your home, look no further than Goodman’s GCES801005CN. This gas furnace features efficient operation and high-quality construction to provide your home with reliable, affordable heating. The GCES801005CN single-stage, multi-speed furnace is a great value designed for many applications.
The GCES801005CN Goodman gas furnace is suitable in output for a small house in ideal climate conditions. The BTU count is the input per hour of the furnace, and the output is 80,000 BTU’s (100,000 x 80% AFUE) per hour.
The GCES801005CN Goodman gas furnace has the basic efficiency rating in furnaces on the market today. At 80% efficient, the furnace loses only 20% of fuel going into it to normal furnace operation, and the remaining 80% is used to heat your house. All 80% furnaces such as this one require metal flue venting, and furnaces that are 90% efficient or higher require plastic/pvc flue venting.
Please note that this furnace does not comply with California Low NOx or Ultra-Low NOx regulations. For the Low NOx equivalent of this furnace, click here. If you have any questions, please contact us.
A single stage furnace operates using the same amount of energy every time is turns on. The GCES801005CN Goodman gas furnace operates using only one heat output. This furnace will operate at 100% output whenever it is operating.
From the factory, the GCES801005CN runs on natural gas. However all Goodman gas furnaces can be converted to propane using the furnace’s corresponding LP conversion kit, an optional accessory at an additional cost that consists of a replacement set of orifices and springs.
The GCES801005CN utilizes a multi-speed ECM motor, which is more efficient than older PSC blower motors, saving you money in electric bills.
With installation that follows your state and local codes and with online registration, all Goodman furnaces come with a 10-year parts and lifetime heat exchanger warranty through the manufacturer.
Instead of a standing pilot light, the GCES801005CN has a newer, more efficient hot surface igniter. Hot surface igniters are much more efficient and safer than standard standing pilot lights.
The Goodman brand has improved technology from years of production experience, allowing for a long-lasting product that rarely runs into any operation-based problems. However, if the furnace does need maintenance or warranty work, the control board has a set of sensors that will identify any basic problems in the furnace’s basic operation.
The GCES801005CN Goodman gas furnace has a durable outer cabinet. The heavy-gauge steel used in the furnace’s design allows for a more protected interior, and less air leakage from the furnace’s operation, resulting in a more quiet operation while still decreasing operation costs.
From enhanced operation to efficiency, the Goodman gas furnaces have a lot to offer. However, Goodman’s features don’t stop at quality of unit. The GCES801005CN allows for a significantly more streamlined installation process with its universal design, consisting of its ability to be installed in either downflow or horizontal configurations, lowering labor costs.
The Goodman GSZ140361 heat pump condenser is a standard efficiency, low-cost solution for an all-electric home when paired with a suitable heat pump coil or air handler. Just like all of Goodman’s equipment, the GSZ140361 is manufactured with high-quality materials to provide a superior comfort in your home.
The Goodman GSZ140361 heat pump has a capacity of 3 tons. In an ideal climate, this tonnage will normally cover up to a medium-sized house. In some bundles, the air handler or coil associated with this condenser may be intentionally larger in tonnage to maintain the unit’s overall efficiency. Please note that an indoor air handler or coil that is compatible with heat pumps is required for this unit to function.
At 14 SEER, the GSZ140361 heat pump condenser has the industry-standard minimum, allowing the unit to remain inexpensive upfront in comparison to higher SEER ratings. If you are replacing an existing heat pump, in most cases this SEER rating will still be higher than your old unit, allowing it to still save you money over time in energy bills.
The GSZ140361 condenser comes with Goodman’s standard 10 year parts warranty with online registration through the manufacturer. An installation that follows your state and local codes is required for the warranty to be upheld.
The Goodman GSZ140361 heat pump condenser is manufactured with a durable cabinet with paint that is approved for 500 hours of salt spray, making it compliant with the 2010 Florida building code unit integrity requirements for hurricane-like weather when properly anchored to your local codes. The built-in bi-flow liquids line filter drier protects the unit from impurities in the refrigerant and other general wear and tear, increasing the reliability of the unit.
The Goodman GSZ140361 has easily accessible gauge ports and service valves with sweat connections, allowing for a faster and easier installation process. There are factory-installed features such as a filter drier, compressor crankcase heater, pressure switches, and a high-capacity muffler so your installer doesn’t have to, further providing ease to the installation process. Moreover, the cabinet of the unit is fit with two maintenance access panels: one on the top and one on the side. All of these features lower your installation and maintenance costs, keeping more money in your pocket to spend on the things you care about most.
With its sound control top insulation and SmartShift technology for quiet and reliable defrost cycles, the GSZ140361 heat pump has some of the lowest sound outputs on a single stage unit on the market today.
The Goodman CHPF3743C6 evaporator coil is designed for any installations that the coil needs to sit on its side, in the horizontal position. With its enhanced comfort and superior efficiency design, the CHPF3743C6 is an inexpensive yet quality choice for you.
At an output of 3 to 3.5 tons, the Goodman CHPF3743C6 evaporator coil is ready for almost any horizontal installation at that size. In many situations, a condenser that is paired with the condenser is going to be smaller than this coil. This is intentional and is to maintain the overall unit’s efficiency. Please note that for this coil to function, a furnace or blower and a condenser is required, all sold separately. This coil is not designed to replace a coil in a single-piece air handler.
The CHPF3743C6 coil is covered under Goodman’s standard 10 year parts warranty when the unit is installed following your state and local codes, the coil is paired with a compatible R410A condenser, and the entire system is registered online through the manufacturer.
The Goodman CHPF3743C6 evaporator coil is designed with a durable outer casing and a rust-resistant drain pan to lower general wear and tear to make sure the coil works for years to come. To ease installation, the unit is designed to be slim and able to fit in many crawl spaces and attics, and with its foil-face insulation making the unit’s air leakage minimal, installation location does not necessarily have to be insulated for normal temperature operations. For maintenance, the coil has a split-seam on the front of it for easier access.
Goodman's TXV valves are designed to improve the reliability and efficiency of your central split system. With the TX3N4, you can be assured that your two-and-a-half or three ton system is getting the proper refrigerant flow, even through changing conditions. Since this valve is installed externally, it is easy to service and maintain. If you're looking to improve the efficiency and performance of your system, the TX3N4 is a good start.
| 100,000 BTU 80% AFUE Multi-Speed Single Stage Goodman Gas Furnace - Downflow/Horizontal | |
|---|---|
| Weight (in lbs) | 129.000000 |
| Exhaust Flue Requirement | Metal |
| Brand/Manufacturer | Goodman |
| Furnace Efficiency / AFUE | 80% |
| Heating BTU | 100,000 |
| Blower Motor | Multi Speed - ECM |
| Maximum CFM | 2200 |
| Configuration | Downflow/Horizontal |
| Exhaust Pipe | Metal |
| Electrical | 115 V. 1 Phase 60 Hz |
| Burner Stages | Single |
| Fuel Type | Gas |
| Height | 33 3/8" |
| Width | 21" |
| Depth | 28" |
| Warranty | 10 Years with Online Registration |
| Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information |
This gas appliance requires a trained technician to install. Improperly connecting gas lines or improperly connecting a gas flue or venting may result in death. By purchasing this item, you are agreeing that you are using a trained technician to install this gas appliance. We will not be responsible for any injury or property damage arising from improper service or service procedures. Whoever installs or services this unit assumes responsibility for any personal injury or property damage which may result. Many jurisdictions require a license to install this equipment.
PROPOSITION 65 WARNING |
| 3 Ton 14 SEER Goodman Heat Pump | |
| Weight (in lbs) | 215.000000 |
| Brand/Manufacturer | Goodman |
| Replaces | GSZ140371 |
| Cooling BTU | 36,000 |
| Heating BTU | 36,000 |
| Decibel Level (dBA) | 74 |
| Energy Star | Yes |
| Refrigerant | R410A |
| SEER (Efficiency) | 14 |
| Condenser Stages | Single Stage |
| Compressor Type | Scroll |
| Liquid Valve Size | 3/8" |
| Suction Valve Size | 3/4" |
| Electrical | 208 / 230 V. 1 Phase 60 Hz |
| Max Breaker Size | 30 amps |
| Min. Breaker Size | 22.4 amps |
| Tonnage | 3 Ton |
| Valve Type | Sweat |
| Height | 36" |
| Width | 29" |
| Depth | 29" |
| Warranty | 10 Years with Online Registration |
| Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING |
| 3 to 3.5 Ton 21" Goodman Horizontal Evaporator Cased Coil | |
| Weight (in lbs) | 63.000000 |
| Brand/Manufacturer | Goodman |
| Configuration | Horizontal |
| Refrigerant | R410A or R22 |
| Liquid Line | 3/8" |
| Suction Line | 7/8" |
| Tonnage | 3 Ton to 3.5 Ton |
| Style | A-Coil |
| Height | 21" |
| Width | 21.125" |
| Depth | 26" |
| Warranty | 10 Years with Online Registration |
| Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING |
| Goodman 2.5 to 3 Ton TXV Kit - R-410A | |
| Weight (in lbs) | 2.500000 |
| Brand/Manufacturer | Goodman |
| Refrigerant | R410A |
| Safety Information | PROPOSITION 65 WARNING |
For over three decades Goodman has concentrated on something more important than simple brand recognition consumer advertising. They focus on the design, engineering, and manufacturing of dependable products that have helped millions and millions of homeowners achieve reliable, high-quality, and affordable indoor comfort. In addition, Goodman has earned the loyalty and respect from thousands of local independent heating and cooling professionals across North America.
Our mission is simple: To provide an open HVAC marketplace online, offering the best HVAC brands directly to the public, based on real, affordable prices. For too long, local dealers have charged whatever they could get away with - but now YOU HAVE A CHOICE.
Choose us for:
We sell products at wholesale pricing. No markups, no hidden fees. Our average customer saves BETWEEN THREE TO SIX THOUSAND DOLLARS
-That's the Direct Advantage!
Just because a brand is nationally known, doesn't mean it's the best. Our HVAC technicians have hand-selected the most efficient and durable products for American homeowners, giving you exactly what you need at the best pricing.
We choose products with long, best-in-the-market warranties by manufacturers with great customer service and solid reputations. This gives you peace of mind that you'll be getting a great quality product.
We've helped over 100,000 American homeowners and earned their trust.
Real technicians with real experience are available on the phone and chat to help you pick your perfect system
Unlike local dealers who try to upsell expensive brands or unnecessary equipment, we only recommend the exact products you need, and choose from affordable alternatives to name brands.
Quickly filter what you're loooking for with our HVAC EASY SYSTEM SELECT tool.
We've helped over 100,000 American homeowners and earned their trust.
All our HVAC systems ship free, making your new system even more affordable. Plus, looko for free shipping on many standalone products too.
Don't wait for your system. We have over $50 million dollars of inventory in our warehouses nationwide - we're ready for your order!
Our website displays real-time inventory, so you know exactly when to expect your order. Choose from in-stock items so you can get your new system right away.
We've helped over 100,000 American homeowners and earned their trust.
Got everything you needed to install? See the recommended and/or required options for installation below.
Check the items you would like to include with your order
Contact Our Product Specialist
