We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
1-800-397-1392
Today's Hours 8am - 11pm estThe Stealth Pinnacle Series Single Zone SC-36ZPL-HP230 heat pump condenser is Energy Star rated, with Hyper Heat performance down to an outside temperature of -31. The outdoor unit comes pre-charged with R410a, good for a 25-foot line set and the air handler. Pinnacle Series condensers have the highest efficiency ratings of any mini split, up to 38 SEER and 15 HSPF.
QUICK FACTS
36,000 BTU, 23 SEER
A system this size is suitable for rooms up to 1,500 square feet depending on the climate in your area. The SEER rating of 18 means you pay less for this amount of heating and cooling compared to systems with lower SEER values. Stealth Pinnacle means elite performance at affordable prices.
14 Year Warranty
The Stealth Emerald Series features a 14 warranty with online registration. The standard warranty on the SC-36ZPL-HP230 is a 5-year parts and 7-year limited compressor warranty. With online registration and an installation following state and local installation codes, the compressor warranty increases to 14 years.
Durability and Reliability
Rugged construction, combined with an acrylic resin fin coating adds up to a long, trouble-free service life. Precision engineering is behind every Stealth Pinnacle Series model, resulting in powerful performance across a punishing range of conditions. The SC-36ZPL-HP230 provides continuous heat even with an outdoor temperature as low as -22 degrees Fahrenheit.
Installation and Maintenance
Every Stealth Pinnacle Series condenser comes pre-charged with refrigerant, enough for 25’ of line set per air handler. The line set fittings are compression-type and will require evacuation prior to refrigerant release. Line set kits, including insulated copper refrigerant lines, control wire and drain hose extensions are available under Accessories on this page. Stealth Pinnacle Series features self-diagnosing electronics. Should the system detect a fault, error codes will display on the front of the inside unit.
Please note: This system includes only the outdoor condenser, indoor air handlers and wall mounted or remote thermostats (depending on model) as depicted in the photo above. Additional Accessories are required to complete the installation. Each air handler requires a separate refrigerant line set, control wire and condensation control. The condenser requires connection to household power, wired through a disconnect switch and flexible, weatherproof conduit (whip). Additional optional accessories are also available. For help configuring your system, call (888) 377-2850