BreezRadiance RAD80 - 80 CFM Fan with Heater

SAVE $97.31
By

Delta Breez

In stock
Model

RAD80

ID

102547

Was $202.25 Your Low Price Special Price $104.94

Super Low Profile. Super Low Energy Consumption

The Delta BreezRadiance RAD80 combines a quiet bath fan and heater all in one with built-in thermostat and brushless DC motor engineered to run continuously for a minimum 70,000 hours; airflow rating of 80 CFM (±10%) and 1.5 Sones is at 0.1 static pressure. Power consumption approximately 11.7 Watts with an efficiency rating approximately 7.0 CFM/Watt. Duct diameter is no less than 4” Built-in thermostat to regulate temperature. Metal guard to help prevent user contact with heating wire. Heater element with 1300W and conforms to cUL safety standards. Heater module equipped with thermal cutoff fuse and thermostat.

Features:

  • Energy saving brushless DC motor technology engineered to run continuously for a minimum 70,000 hours
  • Quite operation at 1.5 Sones
  • Energy efficiency at 7.0 CFM/Watts
  • Built-in thermostat for consistent temperature
  • Metal guard to prevent user contact with heating wire
  • 1300W heating element evaluated by cUL for safety standards
  • Heater module equipped with thermal cutoff fuse and thermostat
  • Annual energy cost for 24/7 operation is approximately $12.31
More Information
BreezRadiance RAD80 - 80 CFM Fan with Heater
FeatureSpec
SKURAD80
Weight (in lbs)9.81
Brand/ManufacturerDelta Breez
UPC885917002602
Additional InformationHeating element (Watts): 1300
Additional InformationTotal Power (Watts): 1314
Static Pressure0.1 - 0.25
Maximum CFM80 cfm
Sone1.5
Duct Size4"
Watt8.2 - 11.7 watts
Energy StarYes
Electrical120 Volts 60 Hertz
Max Breaker Size11.0 Amps
CertificationUL and cUL Listed; Certified by HVI
Duct Diameter4"
Height5-1/2"
Width16-13/16"
Depth10-11/16"
Warranty3 Year Limited
Resources You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING
Write Your Own Review
You're reviewing:BreezRadiance RAD80 - 80 CFM Fan with Heater
Your Rating
Customer Questions
Does the direction of the heater matter?
Thank you for your question. We spoke with the vendor and they stated: "Generally speaking the heater should be at least 6 inches from any wall and pointing towards the area to be warmed. However, there could be other factors, mostly installation related that can limit heater orientation options. For example, since the heater is pointing in the opposite direction of the exhaust port, if the exhaust port is pointing to the left, the heater can only be pointing to the right." If you have any further questions, please call us and we will be happy to assist you.
Can the fan run separate from the heater?
Yes, it has a switch to allow the fan to operate without using the heater. If you have any further questions please feel free to give us a call! Thanks.
I gather this unit requires a separate circuit with a 20 amp breaker and 12/2 conductor?
Great question. You will need a separate circuit, 15 amp, 14ga conductors. You can find the installation manual here Installation Manual. If you have any further questions or need further assistance, please feel free to reach out to one of our experienced customer service representatives and they would be happy to assist you. Thank you and have a wonderful day.
Did you find what you were looking for?
blockboard tech