Buck Stove Model 1127 Gas Vent-Free Wall Mount Fireplace - 22"

In Stock - Ready to Ship
By

Buck Stove

In stock
Model

1127-1

ID

36796

$1,051.00
 

This versatile fireplace can wall mounted and provide enough to get your family warm a cozy.

  • Unit Dimensions: 20 1/8" H X 22" W X 7" D
  • Output BTUs/Hour: 25,000
  • Efficiency: 99.9%
  • This model comes with an 65 CFM heat activated, variable speed blower.
  • This model comes equipped with an oxygen depletion sensor for added safety.
  • This model features a built in thermostat control that will modulate the flame on and off to reach the desired temperature set on the control dial.
  • Works during a power outage (excluding blower).
  • This model IS approved for use in aftermarket manufactured homes

The Buck Stove Model 1127 Vent Free stove is also available as a wall mounted heater. The 1127 provides up to 25,000 BTU's while burning 99.9% efficient.. The Model 1127 features a factory installed variable speed blower system. This heater has a thermostat sensing bulb and will modulate the flame on or off based on the setting of the control dial.

Get the heat of a fireplace with out the hassle of wood or the need to run venting. With a built-in thermostat you can easily control the flame to get the temperature that's just right for you. This fireplace also has the bonus of being fully operational in a power outage.

  • Disclaimer - Some states, cities, and/or municipalities have restrictions around vent-free gas fireplaces. It is the responsibility of the customer to ensure you are following all laws & regulations in your area regarding vent-free fireplaces. For example: California does not allow vent-free appliances, Colorado does not allow vent-free appliances in some areas due to altitudes, and Massachusetts does not allow vent-free appliances in bedrooms or bathrooms.
  • More Information
    Buck Stove Model 1127 Gas Vent-Free Wall Mount Fireplace - 22"
    FeatureSpec
    SKU1127-1
    Weight (in lbs)47
    Brand/ManufacturerBuck Stove
    UPC794870101782
    Included ItemsWall Mount Hardware, 65 CFM Heat-Activated Variable Speed Blower, Realistic Logs, Oxygen Depletion Sensor Shutoff System
    Heating BTU25,000
    Maximum CFM65 CFMs (Included Blower)
    Efficiency99.9%
    SEER2 (Efficiency)22.3
    Amperage Requirement1.1 Amps (Included Blower)
    TypeBuilt-In Fireplace, Mobile Home Approved
    Fuel TypePropane, Natural Gas
    CertificationCSA
    Size RangeUp To 29" Wide
    Fireplace StyleContemporary
    Height22"
    Width20 1/8"
    Depth7"
    Warranty5 Years
    Resources You will need Adobe® Acrobat® Reader to view PDF documents.
    Safety Information
    This gas appliance requires a trained technician to install. Improperly connecting gas lines or improperly connecting a gas flue or venting may result in death. By purchasing this item, you are agreeing that you are using a trained technician to install this gas appliance. We will not be responsible for any injury or property damage arising from improper service or service procedures. Whoever installs or services this unit assumes responsibility for any personal injury or property damage which may result. Many jurisdictions require a license to install this equipment.

    PROPOSITION 65 WARNING
    Write Your Own Review
    You're reviewing:Buck Stove Model 1127 Gas Vent-Free Wall Mount Fireplace - 22"
    Your Rating
    Customer Questions
    How many square feet can this heat?
    This unit can heat up to ~900 sqft.   If you have any further questions please feel free to give us a call! Thanks
    How to adjust the pilot on buck stove?
    There is no way to adjust the pilot on most any vent free appliance. For further assistance, please give us a call!
    Can l put this 1127 model in my mantel?
    Buck Stove only tests their fireplaces to be installed into the mantels they manufacturer. If you have any further questions please feel free to give us a call! Thanks.
    Did you find what you were looking for?
    blockboard tech