1-800-397-1392
Today's Hours 8am - 9pm est
Out of stock
AHRI Number:7353513
The Goodman GMVM970803BN furnace is a high-efficient gas furnace that features a modulating gas valve and a variable-speed circulating blower provides efficient and economical performance. Unlike single stage gas furnaces that operate either all on or all off, a Goodman modulating gas furnace typically runs at the lowest possible speed to precisely maintain a constant, steady temperature in your house. This furnace is designed to be installed in either an upflow or horizontal configuration.
The GSX130181 Goodman 1.5 Ton Air-Conditioner Condenser uses the chlorine-free refrigerant R-410A to help prevent damage to the Ozone Layer. This unit is equipped with sound-dampening features to provide operating sound levels are among the lowest in the heating and cooling industry. Using high-quality components,the Goodman GSX130181 air conditioner condenser is rated at 13 SEER and will help reduce energy consumption throughout the life of the system.
The Goodman CAPF1824B6 Upflow/Downflow Cased Indoor Air Conditioner Evaporator Coil is made for use with split-system air conditioning and Evaporator systems. The Goodman Air Conditioning and Heating Company has become one of the largest manufacturers of residential and light commercial air conditioning, heating, and indoor air quality products and systems by focusing on just one thing, building the most reliable and refreshingly affordable indoor comfort products in the market.
Click for the goodman products here
With a variable speed blower motor and modulating gas valves, the GMVM970803BN is from the best furnace series that Goodman has to offer. At 97% efficiency, this furnace has the highest possible efficiency available in today’s technology and offered by Goodman. If you want the best of the best for your home, the GMVM970803BN is the furnace for you.
With an input of 80,000 BTU’s and an efficiency of 97%, the GMVM970803BN has an output of 77,600 BTU’s. This is calculated by taking 80,000 BTU’s times the efficiency of 97%. As such, the GMVM970803BN Goodman gas furnace is designed to be able to cover up to a medium-sized house in ideal climate conditions.
With one of the highest efficiencies possible with today’s technology, Goodman saves you a lot of money in utility bills for the lifetime of the unit. The GMVM970803BN gas furnace is 97% efficient, meaning that a whopping 97% of the gas going into the furnace is used to heat your home, and only 3% of the fuel going into the furnace is lost out of the exhaust. Thanks to its efficiency, the GMVM970803BN is a condensing furnace, meaning that it requires plastic or PVC pipe flue venting.
Goodman manufactured the GMVM970803BN gas furnace to utilize the best burner and blower technologies available. With a modulating gas valve and a variable speed blower motor, the GMVM970803BN gas furnace provides the most stable indoor temperatures and the lowest running times possible. The enhanced comfort and small efficiency increase provided by these features make this furnace a part of Goodman’s top of the line series.
The Goodman brand allows you to protect your investment with a 10 year parts and hassle free replacement warranty. To provide a longer peace-of-mind, Goodman now offers a phenomenal lifetime heat exchanger warranty. Please note that all Goodman warranties require installation that follows your state and local codes, and the unit must be registered online post-installation on the manufacturer’s website.
Not stopping at an enhanced functionality, Goodman designed the GMVM970803BN with a thermally insulated, heavy-gauge cabinet, providing enhanced protection and lowers air leakage to less than 2% to maximize heat transfer and efficiency, as well as to lower the sound output from normal operation. Made of silicon nitride, the ignitor on the GMVM970803BN is more durable and efficient than a pilot light. The heat exchanger on this furnace is made of aluminized steel, resulting in a product that balances reliability, durability, and efficiency in one durable cabinet.
Out of the factory, the GMVM970803BN has a built-in natural gas orifice set. However, an LP conversion kit (found here) can be purchased as an accessory and field-installed if propane is required for your installation.
For a furnace of such prestige the installation and maintenance may seem daunting, however Goodman has made everything easy for you and your contractor, from the beginning and throughout the unit’s life. To allow for installation in more situations, the GMVM970803BN gas furnace can be installed in the upflow or horizontal orientations. The modulating gas valve is self-calibrating, allowing it to automatically configure for each installation. For ease of maintenance, there is an integrated self-diagnostic control board that continuously monitors the system for any possible issues in operation, reliability, and even efficiency, and if there are any issues, there is an easy-to-read display for you and your contractor to quickly identify the problem and solve it faster.
Moreover, the GMVM970803BN is ComfortNet communicating system compatible, providing more advanced diagnostics, automated maintenance alerts, and enhancing furnace performance when implemented. All of these features allow you to keep more money in your pocket and provides a peace of mind throughout the life of your unit, all while still providing the best comfort that Goodman has to offer with this top of the line furnace.
With the CAPF1824B6 evaporator coil, Goodman provides an enhanced comfort to your home. With its ability to work with AC-only systems or with heat pumps and its ability to be installed in both the upflow or downflow orientations, the CAPF1824B6 is designed to be versatile in design and to provide an efficient comfort at a low cost.
The Goodman CAPF1824B6 evaporator coil is rated for a 1.5 to 2 ton output. In many system configurations, this coil may be larger in tonnage than its paired condenser. This is intentional, to maintain the overall efficiency of the entire system.Please note that in order for this coil to function, a furnace or blower and a condenser is required, all sold separately.
The CAPF1824B6 coil is covered under Goodman’s standard 10 year parts warranty when the unit is installed following your state and local codes, the coil is paired with a compatible condenser, and the entire system is registered online through the manufacturer.
The Goodman CAPF1824B6 evaporator coil is able to be installed in upflow and downflow applications. With its rust-resistant, thermoplastic drain plan, water retention rate is significantly lower than previous models. For even more enhanced durability, the cabinet is made of a strong galvanized-steel with a leather-grain finish. If you ever need to perform maintenance on your coil, there is a split-seam on the front of the casing for easy internal access. Please note that this coil will not work as a replacement for any single-piece air handler coils.
The CAPF1824B6 evaporator coil’s foil-faced insulation lowers air leakage, increasing the amount of air flow going into your ductwork, keeping you more comfortable while decreasing the unit’s run time. With compatible equipment, the CAPF1824B6 evaporator coil lives up to Goodman’s enhanced comfort and efficiency standards at a reasonable price.
Goodman's TXV valves are designed to improve the reliability and efficiency of your central split system. With the TX2N4A, you can be assured that your one-and-a-half or two ton system is getting the proper refrigerant flow, even through changing conditions. Since this valve is installed externally, it is easy to service and maintain. If you're looking to improve the efficiency and performance of your system, the TX2N4A is a good start.
Please note that this is not an exhaustive list. Use Ctrl+F to simplify your search. This part is compatible with the following models:
GSX130181 GSX130241 DSXC160241 GSZ130181 GSZ130241 SSZ140181 SSZ140241 SSZ160241 DSZC160241 CAPF1824*6 CAUF1824*6 CHPF1824A6 CSCF1824N6
Line sets are the copper lines which connect an outdoor condensing unit/heat pump to an inside air handler or evaporator coil. Line sets are available in different lengths and diameters to fit most applications.
Line sets are the copper lines which connect an outdoor condensing unit/heat pump to an inside air handler or evaporator coil. Linesets are available in different lengths and diameters to fit most applications.
80,000 BTU 97% AFUE Variable Speed Modulating Upflow Goodman Gas Furnace | |
---|---|
SKU | GMVM970803BN |
Weight (in lbs) | 121.000000 |
AHRI Certificate Number | 7424265 |
Airflow Direction | Upflow/Horizontal |
Exhaust Flue Requirement | Plastic / PVC |
Brand/Manufacturer | Goodman |
Furnace Efficiency / AFUE | 97% |
Heating BTU | 80,000 |
Blower Motor | Variable Speed - ECM |
Maximum CFM | 1200 |
Configuration | Upflow/Horizontal |
Flue Location | Right |
Energy Star | Yes |
Electrical | 115 V. 1 Phase 60 Hz |
Burner Stages | Modulating |
Fuel Type | Propane, Natural Gas |
Height | 34.5" |
Width | 17.5" |
Depth | 28.75" |
Warranty | 10 Years with Online Registration |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
Safety Information |
This gas appliance requires a trained technician to install. Improperly connecting gas lines or improperly connecting a gas flue or venting may result in death. By purchasing this item, you are agreeing that you are using a trained technician to install this gas appliance. We will not be responsible for any injury or property damage arising from improper service or service procedures. Whoever installs or services this unit assumes responsibility for any personal injury or property damage which may result. Many jurisdictions require a license to install this equipment.
PROPOSITION 65 WARNING |
1.5 Ton 13 SEER Goodman Air Conditioner Condenser | |
SKU | GSX130181 |
Weight (in lbs) | 120.000000 |
Brand/Manufacturer | Goodman |
Cooling BTU | 18,000 |
Decibel Level (dBA) | 74 |
Energy Star | No |
Refrigerant | R410A |
SEER1 (Efficiency) | 13 |
Condenser Stages | Single Stage |
Compressor Type | Rotary |
Liquid Line | 3/8" |
Suction Line | 3/4" |
Liquid Valve Size | 3/8" |
Electrical | 208 / 230 V. 1 Phase 60 Hz |
Max Breaker Size | 15 amps |
Min. Breaker Size | 9.1 amps |
Tonnage | 1.5 Ton |
Valve Type | Sweat |
Height | 25.75" |
Width | 23" |
Depth | 23" |
Warranty | 10 Years with Online Registration |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
Safety Information | PROPOSITION 65 WARNING |
1.5 to 2 Ton 17.5" Width Goodman Vertical Evaporator Cased Coil | |
SKU | CAPF1824B6 |
Weight (in lbs) | 20.000000 |
Brand/Manufacturer | Goodman |
Configuration | Upflow / Downflow |
Refrigerant | R410A or R22 |
Liquid Line | 3/8" |
Suction Line | 3/4" |
Tonnage | 2 Ton |
Style | A-Coil |
Height | 18" |
Width | 17.5" |
Depth | 21" |
Warranty | 10 Years with Online Registration |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
Safety Information | PROPOSITION 65 WARNING |
Goodman 1.5 to 2 Ton TXV Kit - R-410A | |
SKU | TX2N4A |
Weight (in lbs) | 2.500000 |
Brand/Manufacturer | Goodman |
Refrigerant | R410A |
Safety Information | PROPOSITION 65 WARNING |
30 Feet of 3/8" LL x 3/4" SL x 3/8" Insulated Line Set | |
SKU | LS38343830 |
Weight (in lbs) | 35.000000 |
Brand/Manufacturer | Online Supply |
Liquid Line | 3/8" |
Suction Line | 3/4" |
Suction Line Insulation Thickness | 3/4" |
Length | 30 feet |
50 Feet of 3/8" LL x 3/4" SL x 3/8" Insulated Line Set | |
SKU | LS38343850 |
Weight (in lbs) | 22.000000 |
Brand/Manufacturer | Online Supply |
Liquid Line | 3/8" |
Suction Line | 3/4" |
Suction Line Insulation Thickness | 3/4" |
Length | 50 feet |
Safety Information | PROPOSITION 65 WARNING |
1.5 Ton ACIQ Hybrid Upgrade | |
SKU | ACIQ-18-EHPB-UPG |
Weight (in lbs) | 120.000000 |
Brand/Manufacturer | ACiQ |
Refrigerant | R410A |
Safety Information | PROPOSITION 65 WARNING |