The Goodman GMEC960603BN furnace features a two stage gas valve and multi-speed blower motor that can be installed in either upflow or horizontal configurations. This furnace also features a X13 blower motor that saves electricity during the heating and cooling months. This direct current motor uses less electricity than the standard multi-speed furnace blower. This furnace also includes a patented aluminized-steel tubular heat exchanger and durable Silicon Nitride Hot Surface Ignition system. These furnaces are run-tested for heating or combination heating and cooling applications. With a heavy-gauge, reinforced, insulated steel cabinet and durable baked enamel finish, this unit can be installed in a variety of locations.
The Goodman GSZ160181 Heat Pump uses the chlorine-free refrigerant R-410A to help prevent damage to the Ozone Layer. This unit is equipped with sound-dampening features to provide operating sound levels are among the lowest in the heating and cooling industry. Using high-quality components, the Goodman GSZ160181 heat pump is rated at 16 SEER and will help reduce energy consumption throughout the life of the system.
The Goodman CHPF3636B6 Horizontal AC Evaporator Coil is made for use with split-system air conditioning and Evaporator systems. The Goodman Air Conditioning and Heating Company has become one of the largest manufacturers of residential and light commercial air conditioning, heating, and indoor air quality products and systems by focusing on just one thing, building the most reliable and refreshingly affordable indoor comfort products in the market.
3 Ton 17.5" Goodman Horizontal Evaporator Cased Coil
The Goodman CHPF3636B6 Horizontal Cased Indoor Air Conditioner Evaporator Coil is made for use with split-system air conditioning and Evaporator systems. The Goodman Air Conditioning and Heating Company has become one of the largest manufacturers of residential and light commercial air conditioning, heating, and indoor air quality products and systems by focusing on just one thing, building the most reliable and refreshingly affordable indoor comfort products in the market.
- Suitable for use with R-410A and R-22 refrigerants
- Rust-resistant, thermoplastic drain pans feature a low water-retention design
- Check flowrater expansion device for heat pump or cooling-only applications
- Rifled aluminum tubing and louvered aluminum fin coils on the CAPF, CAUF, and CHPF coils
- AHRI Certified; ETL Listed
- Foil-face insulation
- Galvanized-steel, leather-grain finish
- Architectural Gray paint finish on CAPF and CHPF cased coils
- Split-seam front for easy access
- 17½”, 21”, and 24½” CHPF coils have one 3½” adapter plate
Goodman 1.5 to 2 Ton TXV Kit - R-410A
Goodman's TXV valves are designed to improve the reliability and efficiency of your central split system. With the TX2N4A, you can be assured that your one-and-a-half or two ton system is getting the proper refrigerant flow, even through changing conditions. Since this valve is installed externally, it is easy to service and maintain. If you're looking to improve the efficiency and performance of your system, the TX2N4A is a good start.
Product Compatible With
- Goodman GSX130181 Air Conditioners
- Goodman GSX130241 Air Conditioners
- Goodman DSXC160241 Air Conditioners
- Goodman GSZ130181 Heat Pumps
- Goodman GSZ130241 Heat Pumps
- Goodman SSZ140181 Heat Pumps
- Goodman SSZ140241 Heat Pumps
- Goodman SSZ160241 Heat Pumps
- Goodman DSZC160241 Heat Pumps
- Goodman CAPF1824*6 Evaporator Coils
- Goodman CAUF1824*6 Evaporator Coils
- Goodman CHPF1824A6 Evaporator Coils
- Goodman CSCF1824N6 Evaporator Coils
60,000 BTU 96% AFUE 2 Stage Goodman Gas Furnace - Upflow/Horizontal
As a high-efficiency system, the GMEC960603BN Goodman gas furnace features many money saving features. The two-stage, multi-speed furnace uses a superior heat exchanger for better heat transfers to your home. Considered one of the best efficiencies on the market, the GMEC960603BN is a good way to go if you want to lower your gas bill.
- This furnace is ideal to heat a medium-sized house (depending on climate)
- 60,000 BTU 96% AFUE natural gas furnace
- Requires plastic/PVC flue venting
- Can be used in the upflow or horizontal orientation
- Can be converted to an LP furnace with an optional conversion kit (sold separately)
- Innovative design for electrical efficiency, safety, and lower sound output
Heating up to a medium-sized house in normal conditions, the GMEC960603BN Goodman gas furnace has an input of 60,000 BTU’s and an output of 57,600 BTU’s. The output in this case is determined by taking the input times the efficiency rating.
The GMEC960603BN Goodman gas furnace is a 96% efficient furnace, making it a condensing setup. This efficiency means that only 4% of the fuel going into the furnace is used up in furnace operations, while 96% of the fuel is used to heat your home. As a condensing furnace, this furnace will need to be vented with plastic or PVC flue venting. If you need to use metal flue venting, you would need an 80% efficient furnace.
Two Stage Multi-Speed Furnace
With a two stage burner, the GMEC960603BN provides two heating outputs: one at a 60% heating output and one at a 100% output. The furnace also has a multi speed ECM motor instead of the last-generation inefficient PSC motor. Both of these built-in upgrades allow for your furnace to adjust the heating output and airflow more precisely to better suit your home’s comfort needs and provide a slightly higher efficiency.
With installation that follows your state and local codes and with online registration, all Goodman furnaces come with a 10-year parts and lifetime heat exchanger warranty through the manufacturer.
Durability and Reliability
The exterior casing on the GMEC960603BN is heavy-gauge steel that is insulated for enhanced protection and to lower air leakage and sound output from normal furnace operation. The hot surface ignitor is more efficient than earlier models and standing pilot lights thanks to its revolutionary new technology. Both of these end up saving you money on installation, maintenance, and bills.
Installation and Maintenance
The cost-saving benefits of the Goodman brand doesn’t stop at efficiency. The GMEC960603BN Goodman furnace can be upflow or horizontal, increasing the number of ways that your installer can install the system. The low-voltage terminals that are color-coded, the installation is faster and easier over standard non-colored systems. Straight from the factory, the GMEC960603BN comes with natural gas valves. However, increasing its versatility in installation, Goodman offers an LP conversion kit (found here at an additional cost) if you need it to be propane instead of natural gas. Not only does the Goodman brand save you money on installation costs, but also with maintenance and warranty work. In the event of a rare warranty issue, the on board self-diagnostic control board alerts you and your serviceman what is wrong with the unit for most basic issues for a faster solution.
1.5 Ton 16 SEER Goodman Heat Pump
At one of the higher efficiencies on the market, the Goodman GSZ160181 heat pump condenser is designed to save you money both up front and in energy bills over time. With its high-quality construction, the GSZ160181 is considered a good all-around choice for many applications.
- Designed to cover a smaller house in average climates
- 1.5 ton, 16 SEER heat pump condenser
- Low sound output
- Fully charged for up to 15’ of line set
- Factory-installed bi-flow filter drier
The Goodman GSZ160181 heat pump is rated for 1.5 tons, which is normally enough to cover a smaller house in average climates. A heat pump coil or air handler is required for this condenser to function, and some indoor units will be larger in tonnage than this condenser in some bundles to maintain the unit’s overall efficiency.
With its high-end 16 SEER efficiency rating, the GSZ160181 is designed to save you money over the entire life of the unit. 16 SEER units will save you about 12% more in energy bills over a 14 SEER system, making this upgrade a smart upgrade to save you money over time with a small increase in your initial investment in the system.
The GSZ160181 condenser comes with Goodman’s standard 10 year parts warranty with online registration through the manufacturer. An installation that follows your state and local codes is required for the warranty to be upheld.
Durability and Reliability
The cabinet on the GSZ160181 heat pump is designed to be durable in harsh conditions. With its baked-on polyester coat of paint, the unit is approved for up to 500 hours of salt spray. The enhanced durability and paint coat makes the GSZ160181 compliant with 2010 Florida building codes for unit integrity for hurricane-like winds when the unit is properly anchored. For reliability, there is also a built-in bi-flow filter drier that lowers general wear-and-tear on the internals of the unit.
Installation and Maintenance
In order to provide a faster and less expensive installation, the Goodman GSZ160181 heat pump is factory-installed with pressure switches, a high-capacity muffler, easily accessible gauge ports, and service valves with sweat connections. The cabinet of the unit is also fitted with dual access panels—one on the side and one on the top—to allow for a much easier maintenance procedure should the need for maintenance arise.
Comfort in Mind
The Goodman company has always promoted enhanced comfort, higher efficiency, and lower cost to all of its units. With SmartShift technology and an enhanced sound insulation structure, the GSZ160181 is whisper-quiet, allowing Goodman to continue to follow its goals in achieving the best comfort levels possible at a low cost.