Today's Hours 8am - 9pm est
Out of stock
AHRI Number:200810864
The Goodman CHPF3743C6 evaporator coil is designed for any installations that the coil needs to sit on its side, in the horizontal position. With its enhanced comfort and superior efficiency design, the CHPF3743C6 is an inexpensive yet quality choice for you.
At an output of 3 to 3.5 tons, the Goodman CHPF3743C6 evaporator coil is ready for almost any horizontal installation at that size. In many situations, a condenser that is paired with the condenser is going to be smaller than this coil. This is intentional and is to maintain the overall unit’s efficiency. Please note that for this coil to function, a furnace or blower and a condenser is required, all sold separately. This coil is not designed to replace a coil in a single-piece air handler.
The CHPF3743C6 coil is covered under Goodman’s standard 10 year parts warranty when the unit is installed following your state and local codes, the coil is paired with a compatible R410A condenser, and the entire system is registered online through the manufacturer.
The Goodman CHPF3743C6 evaporator coil is designed with a durable outer casing and a rust-resistant drain pan to lower general wear and tear to make sure the coil works for years to come. To ease installation, the unit is designed to be slim and able to fit in many crawl spaces and attics, and with its foil-face insulation making the unit’s air leakage minimal, installation location does not necessarily have to be insulated for normal temperature operations. For maintenance, the coil has a split-seam on the front of it for easier access.
Line sets are the copper lines which connect an outdoor condensing unit/heat pump to an inside air handler or evaporator coil. Line sets are available in different lengths and diameters to fit most applications.
Line sets are the copper lines which connect an outdoor condensing unit/heat pump to an inside air handler or evaporator coil. Linesets are available in different lengths and diameters to fit most applications.
Thermostatic Expansion Valves (TXVs) are:
Your system will operate more precisely and with greater efficiency with a TXV. These valves offer more control over how much liquid refrigerant enters the evaporator coil. The valves only allow a precise amount of liquid into the evaporator coil to ensure that all liquid that enters fully evaporates. This prevents too little liquid from entering the evaporator making the system run less efficiently. It also prevents too much liquid from entering the evaporator which can cause excess liquid in the suction line. Thermostatic Expansion Valves can be mounted in any position on the evaporator coil inlet and are reliable, efficient and virtually trouble-free. Select the TXV to correspond with the tonnage of your air conditioner or heat pump, as well as to match the type of refrigerant your systems uses, R-22 (standard) or R-410A (new alternative).
When using a TXV, manufacturer's recommend also installing a hard-start capacitor in your heat pump or condenser. This capacitor gives an extra "jolt" of electricity upon startup to push the refrigerant against higher head pressures that are present with a TXV system. If a hard-start capacitor isn't installed, the equipment compressor may sometimes have difficulty starting.
Please note that this is not an exhaustive list. Use Ctrl+F to simplify your search. This part is compatible with the following models:
GSX160181 GSX160241 GSX160301
| 1.5 Ton 16 SEER Goodman Air Conditioner Condenser | |
|---|---|
| SKU | GSX160181 |
| Weight (in lbs) | 163.000000 |
| Brand/Manufacturer | Goodman |
| Replaces | GSX16S181 |
| Cooling BTU | 18,000 |
| Decibel Level (dBA) | 71.5 |
| Energy Star | Yes |
| Refrigerant | R410A |
| SEER1 (Efficiency) | 16 |
| Condenser Stages | Single Stage |
| Compressor Type | Scroll |
| Liquid Valve Size | 3/8" |
| Suction Valve Size | 3/4" |
| Electrical | 208 / 230 V. 1 Phase 60 Hz |
| Max Breaker Size | 20 amps |
| Min. Breaker Size | 12.4 amps |
| Tonnage | 1.5 Ton |
| Height | 32.25" |
| Width | 29" |
| Depth | 29" |
| Warranty | 10 Years with Online Registration |
| Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING |
| 3 to 3.5 Ton 21" Goodman Horizontal Evaporator Cased Coil | |
| SKU | CHPF3743C6 |
| Weight (in lbs) | 63.000000 |
| Brand/Manufacturer | Goodman |
| Configuration | Horizontal |
| Refrigerant | R410A or R22 |
| Liquid Line | 3/8" |
| Suction Line | 7/8" |
| Tonnage | 3.5 Ton |
| Style | A-Coil |
| Height | 21" |
| Width | 21.125" |
| Depth | 26" |
| Warranty | 10 Years with Online Registration |
| Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING |
| 30 Feet of 3/8" LL x 3/4" SL x 3/8" Insulated Line Set | |
| SKU | LS38343830 |
| Weight (in lbs) | 35.000000 |
| Brand/Manufacturer | Online Supply |
| Liquid Line | 3/8" |
| Suction Line | 3/4" |
| Suction Line Insulation Thickness | 3/4" |
| Length | 30 feet |
| 50 Feet of 3/8" LL x 3/4" SL x 3/8" Insulated Line Set | |
| SKU | LS38343850 |
| Weight (in lbs) | 22.000000 |
| Brand/Manufacturer | Online Supply |
| Liquid Line | 3/8" |
| Suction Line | 3/4" |
| Suction Line Insulation Thickness | 3/4" |
| Length | 50 feet |
| Safety Information | PROPOSITION 65 WARNING |
| Goodman 1.5 to 2.5 Ton Fixed TXV Kit - R-410A | |
| SKU | TXV-30 |
| Weight (in lbs) | 2.500000 |
| Brand/Manufacturer | Goodman |
| Refrigerant | R410A |
| Safety Information | PROPOSITION 65 WARNING |
For over three decades Goodman has concentrated on something more important than simple brand recognition consumer advertising. They focus on the design, engineering, and manufacturing of dependable products that have helped millions and millions of homeowners achieve reliable, high-quality, and affordable indoor comfort. In addition, Goodman has earned the loyalty and respect from thousands of local independent heating and cooling professionals across North America.
Our mission is simple: To provide an open HVAC marketplace online, offering the best HVAC brands directly to the public, based on real, affordable prices. For too long, local dealers have charged whatever they could get away with - but now YOU HAVE A CHOICE.
Choose us for:
We sell products at wholesale pricing. No markups, no hidden fees. Our average customer saves BETWEEN THREE TO SIX THOUSAND DOLLARS
-That's the Direct Advantage!
Just because a brand is nationally known, doesn't mean it's the best. Our HVAC technicians have hand-selected the most efficient and durable products for American homeowners, giving you exactly what you need at the best pricing.
We choose products with long, best-in-the-market warranties by manufacturers with great customer service and solid reputations. This gives you peace of mind that you'll be getting a great quality product.
We've helped over 100,000 American homeowners and earned their trust.
Got everything you needed to install? See the recommended and/or required options for installation below.
Check the items you would like to include with your order
Contact Our Product Specialist
