2 Ton 14 SEER Goodman Air Conditioner with Horizontal Slab Coil

OVERVIEW

Designed for use in primarily low-airflow resistance installations, the Goodman CSCF3642N6 slab coil has a low profile, allowing it to fit in tight spaces while maintaining an inexpensive cost.

QUICK FACTS

• 3 to 3.5 ton slab evaporator coil
• Installable in the horizontal configuration
• Compatible with R410A and R22
• Compatible with AC only and heat pump condensers
• Low profile
• Check flowrater expansion device

3 to 3.5 Tons

At an output of 3 to 3.5 tons, the Goodman CSCF3642N6 evaporator coil is ready for almost any horizontal application that matches your output needs. In entire system configurations, the coil will be either larger or the same size as the condenser’s tonnage. As such, the tonnages of the coil and the condenser may be different in order to maintain the unit’s efficiency.
Please note that for this coil to function, a furnace or blower and a condenser is required, all sold separately. This coil is not designed to replace the coil in a single-piece air handler.

Warranty

Goodman offers a 10 year parts warranty on the CSCF3642N6 when it is installed following your state and local codes, when a compatible R410A condenser is used, and when the entire system is registered online through the manufacturer.

With its small form factor, the Goodman CSCF3642N6 horizontal slab evaporator coil is designed for tight installation spaces. The copper sweat connections allow for faster installation, saving you money. There is a factory-implemented rust-resistant, high-temperature thermoplastic drain pan with multiple drain connections, making it reliable even with a high amount of water coming off the unit due to humidity. The copper tube and aluminum fin coil is designed to be durable for constant use, giving you the peace of mind that your unit will run when you need it most.

Line sets are the copper lines which connect an outdoor condensing unit/heat pump to an inside air handler or evaporator coil. Line sets are available in different lengths and diameters to fit most applications.

Line sets are the copper lines which connect an outdoor condensing unit/heat pump to an inside air handler or evaporator coil. Linesets are available in different lengths and diameters to fit most applications.