The Goodman GMVM970603BN furnace is a high-efficient gas furnace that features a modulating gas valve and a variable-speed circulating blower provides efficient and economical performance. Unlike single stage gas furnaces that operate either all on or all off, a Goodman modulating gas furnace typically runs at the lowest possible speed to precisely maintain a constant, steady temperature in your house. This furnace is designed to be installed in either an upflow or horizontal configuration.
The Goodman GSZ160361 Heat Pump uses the chlorine-free refrigerant R-410A to help prevent damage to the Ozone Layer. This unit is equipped with sound-dampening features to provide operating sound levels are among the lowest in the heating and cooling industry. Using high-quality components, the Goodman GSZ160361 heat pump is rated at 16 SEER and will help reduce energy consumption throughout the life of the system.
The Goodman CAPF3137B6 Upflow/Downflow Cased Indoor Air Conditioner Evaporator Coil is made for use with split-system air conditioning and Evaporator systems. The Goodman Air Conditioning and Heating Company has become one of the largest manufacturers of residential and light commercial air conditioning, heating, and indoor air quality products and systems by focusing on just one thing, building the most reliable and refreshingly affordable indoor comfort products in the market.
3 Ton 16 SEER Goodman Heat Pump
At one of the higher efficiencies on the market, the Goodman GSZ160361 heat pump condenser is designed to save you money both up front and in energy bills over time. With its high-quality construction, the GSZ160361 is considered a good all-around choice for many applications.
- Designed to cover a medium-sized house in average climates
- 3 ton, 16 SEER heat pump condenser
- Low sound output
- Fully charged for up to 15’ of line set
- Factory-installed bi-flow filter drier
The Goodman GSZ160361 heat pump is rated for 3 tons, which is normally enough to cover a medium-sized house in average climates. A heat pump coil or air handler is required for this condenser to function, and some indoor units will be larger in tonnage than this condenser in some bundles to maintain the unit’s overall efficiency.
With its high-end 16 SEER efficiency rating, the GSZ160361 is designed to save you money over the entire life of the unit. 16 SEER units will save you about 12% more in energy bills over a 14 SEER system, making this upgrade a smart upgrade to save you money over time with a small increase in your initial investment in the system.
The GSZ160361 condenser comes with Goodman’s standard 10 year parts warranty with online registration through the manufacturer. An installation that follows your state and local codes is required for the warranty to be upheld.
Durability and Reliability
The cabinet on the GSZ160361 heat pump is designed to be durable in harsh conditions. With its baked-on polyester coat of paint, the unit is approved for up to 500 hours of salt spray. The enhanced durability and paint coat makes the GSZ160361 compliant with 2010 Florida building codes for unit integrity for hurricane-like winds when the unit is properly anchored. For reliability, there is also a built-in bi-flow filter drier that lowers general wear-and-tear on the internals of the unit.
Installation and Maintenance
In order to provide a faster and less expensive installation, the Goodman GSZ160361 heat pump is factory-installed with pressure switches, a high-capacity muffler, easily accessible gauge ports, and service valves with sweat connections. The cabinet of the unit is also fitted with dual access panels—one on the side and one on the top—to allow for a much easier maintenance procedure should the need for maintenance arise.
Comfort in Mind
The Goodman company has always promoted enhanced comfort, higher efficiency, and lower cost to all of its units. With SmartShift technology and an enhanced sound insulation structure, the GSZ160361 is whisper-quiet, allowing Goodman to continue to follow its goals in achieving the best comfort levels possible at a low cost.
Goodman 2.5 to 3 Ton TXV Kit - R-410A
Goodman's TXV valves are designed to improve the reliability and efficiency of your central split system. With the TX3N4, you can be assured that your two-and-a-half or three ton system is getting the proper refrigerant flow, even through changing conditions. Since this valve is installed externally, it is easy to service and maintain. If you're looking to improve the efficiency and performance of your system, the TX3N4 is a good start.
Product Compatible With
- Goodman GSX130301 Air Conditioners
- Goodman GSX130361 Air Conditioners
- Goodman DSXC160361 Air Conditioners
- Goodman GSZ130301 Heat Pumps
- Goodma GSZ130361 Heat Pumps
- Goodman SSZ140301 Heat Pumps
- Goodman SSZ140361 Heat Pumps
- Goodman SSZ140381 Heat Pumps
- Goodman SSZ160301 Heat Pumps
- Goodman SSZ160361 Heat Pumps
- Goodman DSZC160361 Heat Pumps
- Goodman DSZC180361 Heat Pumps
- Goodman CAPF3030*6 Evaporator Coils
- Goodman CAUF3030*6 Evaporator Coils
- Goodman CAPF3642*6 Evaporator Coils
- Goodman CAUF3642*6 Evaporator Coils
- Goodman CHPF3636B6 Evaporator Coils
- Goodman CSCF3036N6 Evaporator Coils
- Goodman CSCF3642N6 Evaporator Coils
60,000 BTU 98% AFUE Upflow Variable Speed Goodman Gas Furnace
With a variable speed blower motor and modulating gas valves, the GMVM970603BN is from the best furnace series that Goodman has to offer. At 97% efficient, this furnace has the highest possible efficiency available in today’s technology and offered by Goodman. If you want the best of the best for your home, the GMVM970603BN is the furnace for you.
- Ideal to heat a medium-sized house (in an ideal climate)
- 60,000 BTU 97% AFUE modulating variable speed natural gas furnace
- Requires plastic/PVC flue venting
- Can be installed in the upflow or horizontal orientation
- Can be converted to propane with an LP conversion kit (sold separately)
- Innovative design for electrical efficiency, safety, and lower sound output
With an input of 60,000 BTU’s and an efficiency of 97%, the GMVM970603BN has an output of 58,200 BTU’s. This is calculated by taking 60,000 BTU’s times the efficiency of 97%. As such, the GMVM970603BN Goodman gas furnace is designed to be able to cover up to a medium-sized house in ideal climate conditions.
With one of the highest efficiencies possible with today’s technology, Goodman saves you a lot of money in utility bills for the lifetime of the unit. The GMVM970603BN gas furnace is 97% efficient, meaning that a whopping 97% of the gas going into the furnace is used to heat your home, and only 3% of the fuel going into the furnace is lost out of the exhaust. Thanks to its efficiency, the GMVM970603BN is a condensing furnace, meaning that it requires plastic or PVC pipe flue venting.
Modulating Variable Speed Furnace
Goodman manufactured the GMVM970603BN gas furnace to utilize the best burner and blower technologies available. With a modulating gas valve and a variable speed blower motor, the GMVM970603BN gas furnace provides the most stable indoor temperatures and the lowest running times possible. The enhanced comfort and small efficiency increase provided by these features make this furnace a part of Goodman’s top of the line series.
The Goodman brand allows you to protect your investment with a 10 year parts and hassle free replacement warranty. To provide a longer peace-of-mind, Goodman now offers a phenomenal lifetime heat exchanger warranty. Please note that all Goodman warranties require installation that follows your state and local codes, and the unit must be registered online post-installation on the manufacturer’s website.
Durability and Reliability
Not stopping at an enhanced functionality, Goodman designed the GMVM970603BN with a thermally insulated, heavy-gauge cabinet, providing enhanced protection and lowers air leakage to less than 2% to maximize heat transfer and efficiency, as well as to lower the sound output from normal operation. Made of silicon nitride, the ignitor on the GMVM970603BN is more durable and efficient than a pilot light. The heat exchanger on this furnace is made of aluminized steel, resulting in a product that balances reliability, durability, and efficiency in one durable cabinet.
Out of the factory, the GMVM970603BN has a built-in natural gas orifice set. However, an LP conversion kit (found here)can be purchased as an accessory and field-installed if propane is required for your installation.
Installation and Maintenance
For a furnace of such prestige, the installation and maintenance may seem daunting, however Goodman has made everything easy for you and your contractor, from the beginning and throughout the unit’s life. To allow for installation in more situations, the GMVM970603BN gas furnace can be installed in the upflow or horizontal orientations. The modulating gas valve is self-calibrating, allowing it to automatically configure for each installation. For ease of maintenance, there is an integrated self-diagnostic control board that continuously monitors the system for any possible issues in operation, reliability, and even efficiency, and if there are any issues, there is an easy-to-read display for you and your contractor to quickly identify the problem and solve it faster. Moreover, the GMVM970603BN is ComfortNet communicating system compatible, providing more advanced diagnostics, automated maintenance alerts, and enhancing furnace performance when implemented. All of these features allow you to keep more money in your pocket and provides a peace of mind throughout the life of your unit, all while still providing the best comfort that Goodman has to offer with this top of the line furnace.
2.5 to 3 Ton 17.5" Width Goodman Vertical Evaporator Cased Coil
With the CAPF3137B6 evaporator coil, Goodman provides an enhanced comfort to your home. With its ability to work with AC-only systems or with heat pumps and its ability to be installed in both the upflow or downflow orientations, the CAPF3137B6 is designed to be versatile in design and to provide an efficient comfort at a low cost.
- 2.5 to 3 ton evaporator coil
- Installable in the upflow or downflow configurations
- Usable with either a heat pump or an AC-only condenser
- Low air leakage
- Check flowrater expansion device for use in any application
2.5 to 3 Tons
The Goodman CAPF3137B6 evaporator coil is rated for a 2.5 to 3 ton output. In many system configurations, this coil may be larger in tonnage than its paired condenser. This is intentional, to maintain the overall efficiency of the entire system.Please note that in order for this coil to function, a furnace or blower and a condenser is required, all sold separately.
The CAPF3137B6 coil is covered under Goodman’s standard 10 year parts warranty when the unit is installed following your state and local codes, the coil is paired with a compatible condenser, and the entire system is registered online through the manufacturer.
Installation and Durability
The Goodman CAPF3137B6 evaporator coil is able to be installed in upflow and downflow applications. With its rust-resistant, thermoplastic drain plan, water retention rate is significantly lower than previous models. For even more enhanced durability, the cabinet is made of a strong galvanized-steel with a leather-grain finish. If you ever need to perform maintenance on your coil, there is a split-seam on the front of the casing for easy internal access. Please note that this coil will not work as a replacement for any single-piece air handler coils.
The CAPF3137B6 evaporator coil’s foil-faced insulation lowers air leakage, increasing the amount of air flow going into your ductwork, keeping you more comfortable while decreasing the unit’s run time. With compatible equipment, the CAPF3137B6 evaporator coil lives up to Goodman’s enhanced comfort and efficiency standards at a reasonable price.